Mitsubishi L200. Manual — part 496
REAR PANEL POWER WINDOW <Vehicles with rear panel power window>
BODY
42-44
STEP 9. Check the wiring harness between C-166
rear panel power window switch connector
terminal No.2 and body earth.
AC809377AZ
Connector: C-166 <LHD>
Harness side
AC903865AG
Connector: C-166 <RHD>
Harness side
NOTE:
AC600687CW
Connector: C-09,C-111,C-113,C-138 <LHD>
C-09(GR),C-138(L)
C-111
C-113
C-09(GR)
C-138(L)
C-111
C-113
AC600623CY
Connector: C-09,C-111,C-113,C-138 <RHD>
C-09(GR),C-138(L)
C-111
C-113
C-09(GR)
C-138(L)
C-111
C-113
Prior to the wiring harness inspection, check the
joint connector (7) C-09, joint connector (3) C-138
and combination meter connectors C-111, C-113 and
repair if necessary.
• Check the earth wires for open circuit.
Q: Is the check result normal?
YES :
Go to Step 10.
NO :
Repair the wiring harness.
STEP 10. Retest the system.
(1) Replace the rear panel power window motor.
(2) Check that the rear panel power window works
normally.
Q: Is the check result normal?
YES :
The procedure is complete.
NO :
Replace the rear panel power window-ECU.
REAR PANEL POWER WINDOW <Vehicles with rear panel power window>
BODY
42-45
Inspection Procedure 2: Any of The Rear Panel Power Window Switch Position is defective.
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
AC900884
Rear Panel Power Window Switch Circuit
REAR PANEL POWER
WINDOW-ECU
ETACS-ECU
AC
COMBINATION METER
Wire colour code
B : Black LG : Light green G : Green L : Blue
W : White Y : Yellow SB : Sky blue
BR : Brown
O : Orange GR : Grey R : Red P : Pink V : Violet
PU : Purple
REAR
PANEL
POWER
WINDOW
SWITCH
2 <LHD>
10 <RHD>
B <LHD>
B-Y<RHD>
B <LHD>
B-Y<RHD>
COMMENTS ON TROUBLE SYMPTOM
If the rear panel power window does not work at all,
the rear panel power window switch, the rear panel
power window motor or the rear panel power win-
dow-ECU may be defective.
PROBABLE CAUSES
• Malfunction of the rear panel power window
switch
• Malfunction of the rear panel power window
motor
• Malfunction of the rear panel power window-ECU
• Damaged harness wires and connectors
DIAGNOSIS PROCEDURE
STEP 1. M.U.T.-III diagnosis code.
When the ignition switch is turned to the "ON" posi-
tion, check that the ETACS-ECU does not set the
diagnosis code.
Q: Is the diagnosis code set?
YES :
Refer to
.
NO :
Go to Step 2.
REAR PANEL POWER WINDOW <Vehicles with rear panel power window>
BODY
42-46
STEP 2. Connector check: D-11 rear panel power
window-ECU connector and C-166 rear panel
power window switch connector
AC809377AZ
Connector: C-166 <LHD>
Harness side
AC903865AG
Connector: C-166 <RHD>
Harness side
AC509967AI
Connector: D-11 <LHD>
Harness side
AC509969AI
Connector: D-11 <RHD>
Harness side
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Repair the connector.
STEP 3. Check the rear panel power window
switch.
Refer to
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Replace the rear panel power window
switch.
REAR PANEL POWER WINDOW <Vehicles with rear panel power window>
BODY
42-47
STEP 4. Check the wiring harness between D-11
rear panel power window-ECU connector
terminal Nos. 4, 5, 6 and C-166 rear panel power
window switch connector terminal Nos. 1, 4, 5.
AC809377AZ
Connector: C-166 <LHD>
Harness side
AC903865AG
Connector: C-166 <RHD>
Harness side
AC509967AI
Connector: D-11 <LHD>
Harness side
AC509969AI
Connector: D-11 <RHD>
Harness side
NOTE:
AC805687
Connector: C-16 <LHD>
AJ
AC600623CE
Connector: C-16 <RHD>
Prior to the wiring harness inspection, check the
intermediate connector C-16 and repair if necessary.
• Check the input and output wires for open and
short circuit.
Q: Is the check result normal?
YES :
Go to Step 5.
NO :
Repair the wiring harness.
STEP 5. Retest the system.
(1) Replace the rear panel power window motor.
(2) Check that the rear panel power window works
normally.
Q: Is the check result normal?
YES :
The procedure is complete.
NO :
Replace the rear panel power window-ECU.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст