Mitsubishi L200. Manual — part 567
AC807299
8
3
1
2
9
10
7
9
AD
10
5
4
8
6
6
11
11
<Type2: Vehicles for Europe (Club and double cab)>
Removal steps
•
Front bumper (Refer to
•
Washer fluid draining
1.
Headlamp washer hose connection
(headlamp washer motor side)
2.
Headlamp washer motor connector
connection
3
Windshield washer tank (Refer to
4.
Headlamp washer motor
5.
Packing
6.
Headlamp washer hose bracket
7.
Headlamp washer hose
8.
Headlamp washer clamp
9.
Headlamp washer collar
10. Headlamp washer actuator
assembly
11. Headlamp washer cover
HEADLAMP WASHER
EXTERIOR
51-84
Removal steps (Continued)
STRIPE TAPE <VEHICLES FOR MOROCCO>
EXTERIOR
51-85
INSPECTION
M1511019103135
HEADLAMP WASHER MOTOR CHECK
1 2
AC509750
1. Remove the headlamp washer motor connector.
2. Check to see that the water is vigorously sprayed
when connecting the positive battery terminal to
terminal number 1 and terminal number 2 to the
negative battery terminal.
STRIPE TAPE <VEHICLES FOR MOROCCO>
REMOVAL AND INSTALLATION
M1511012100168
ACB00488
C
1
3
A
4
2
AC
B
Removal steps
>>
A
<<
1.
Front fender tape
>>
A
<<
2.
Front door tape
>>
A
<<
3.
Rear pillar tape
>>
A
<<
4.
Side gate tape
>>
A
<<
5.
Rear door tape
>>
A
<<
6.
Rear pillar tape
>>
A
<<
7.
Side gate tape
INSTALLATION SERVICE POINT
>>A<< STRIPE TAPES INSTALLATION
1. Clean the tapes installation surfaces on the body
with the parts cleaner (MZ100387 or equivalent).
STRIPE TAPE <VEHICLES FOR MOROCCO>
EXTERIOR
51-86
CAUTION
•
AC600088
<Left side>
<Right side>
AB
Stripe tapes have different notches for identify-
ing the left or right side as shown besides
tape mating notches.
• When attaching the tapes, the surrounding
temperature should be 20 - 38
°C and air
should completely free from dust.
• If the surrounding temperature is lower then
20
°C, the tapes and the places on the body
where the tapes are to be attached should be
heated to 20 - 30
°C.
2. Peel off the backing paper from the reverse side
of the tapes, and then attach them to the vehicle
body so that they fit properly in position.
ACB00410
View A
: Align the tape mating notch to fender/front door end line
: Align the tape end with the body press line
1
2
Fender end line
Front door end line
AB
1. Front fender tape
2. Front door tape
ACB00411
View B
: Align the tape mating notch to front door/rear pillar/side gate end line
: Align the tape end with the body press line
2
4
Front door end line
Rear pillar end line
Side gate end line
3
2. Front door tape
3. Rear pillar tape
4. Side gate tape
AC
ACB00412
View C
: Align the tape end with the body press line
4
AB
4. Side gate tape LH
ACB00413
View C
: Align the tape end with the body press line
4
AB
4. Side gate tape RH
STRIPE TAPE <VEHICLES FOR MOROCCO>
EXTERIOR
51-87
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст