Mitsubishi L200. Manual — part 705
INTERIOR LAMP
CHASSIS ELECTRICAL
54A-187
Inspection Procedure 3: The rear room lamp does not illuminate normally. <vehicles without sunroof>
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
If the rear room lamp do not illuminate, the wiring
harness connector(s), the bulb or the fuse may be
defective or burned out.
PROBABLE CAUSES
• Malfunction of the rear room lamp
• Malfunction of the rear room lamp bulbs
• Damaged harness wires and connectors
DIAGNOSIS PROCEDURE
STEP 1. Check if the front room lamp and ignition
key cylinder illumination lamp illuminates.
Check whether the front room lamp and ignition key
cylinder illumination lamp illuminates normally.
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Refer to Inspection Procedure 1 "The
interior lamps (front room ramp, rear room
lamp and ignition key cylinder illumination
lamp) does not illuminate or extinguish
normally
."
STEP 2. Retest the system.
Q: At which switch positions (DOOR or ON), the rear
room lamp does not illuminate?
Rear Room Lamp Circuit
REAR ROOM
LAMP
<DOUBLE CAB>
<SINGLE CAB>
ETACS-ECU
FUSIBLE
LINK
20
J/B SIDE
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Grey R : Red P : Pink V : Violet PU : Purple SI : Silver
INTERIOR LAMP
CHASSIS ELECTRICAL
54A-188
The lamp does not illuminate at both the ON and
DOOR positions. :
Go to Step 3.
The lamp does not illuminate at the door position. :
Go to Step 7.
The lamp does not illuminate at the ON position. :
Replace the rear room lamp.
STEP 3. Connector check: D-06 rear room lamp
connector
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Repair the defective connector.
STEP 4. Check the bulb.
Check that the rear room lamp bulb is not blown.
Q: Is the check result normal?
YES :
Go to Step 5.
NO :
Replace the rear room lamp bulb.
STEP 5. Check the rear room lamp.
Check whether the rear room lamp illuminates nor-
mally.
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Replace the rear room lamp.
STEP 6. Check the wiring harness from D-06 rear
room lamp connector terminal No.1 to fusible
link (20).
NOTE:
Prior to the wiring harness inspection, check junction
block connectors C-206 and C-213, and repair if nec-
essary.
Check the power supply line for open circuit and
short circuit.
Q: Is the check result normal?
AC903885AT
Harness side
D-06 (GR)
Connector: D-06 <LHD>
Harness side
D-06 <SINGLE CAB>
D-06 <DOUBLE CAB>
AC903886 AN
Harness side
Connector: D-06 <RHD>
Harness side
D-06 <SINGLE CAB>
D-06 <DOUBLE CAB>
D-06 (GR)
AC903885AT
Harness side
D-06 (GR)
Connector: D-06 <LHD>
Harness side
D-06 <SINGLE CAB>
D-06 <DOUBLE CAB>
AC903886 AN
Harness side
Connector: D-06 <RHD>
Harness side
D-06 <SINGLE CAB>
D-06 <DOUBLE CAB>
D-06 (GR)
AC509934
Connectors: C-206, C-213 <LHD>
Junction block (Front view)
C-213
C-206
C-206
C-213
AG
Harness side
Harness side
AC509936
Connectors: C-206, C-213 <RHD>
C-213
C-206
C-213
Harness side
Harness side
C-206
AF
Junction block
(Front view)
INTERIOR LAMP
CHASSIS ELECTRICAL
54A-189
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction ).
NO :
Repair the wiring harness.
STEP 7. Connector check: C-218 ETACS-ECU
connector and D-06 rear room lamp connector
Q: Is the check result normal?
YES :
Go to Step 8.
NO :
Repair the defective connector.
AC509934
Connector: C-218 <LHD>
AJ
Junction
block
Junction block side
AC509943
Connector: C-218 <RHD>
AC
Junction block
(Rear view)
Junction block side
AC903885AT
Harness side
D-06 (GR)
Connector: D-06 <LHD>
Harness side
D-06 <SINGLE CAB>
D-06 <DOUBLE CAB>
AC903886 AN
Harness side
Connector: D-06 <RHD>
Harness side
D-06 <SINGLE CAB>
D-06 <DOUBLE CAB>
D-06 (GR)
INTERIOR LAMP
CHASSIS ELECTRICAL
54A-190
STEP 8. Check the wiring harness from C-218
ETACS-ECU connector terminal No.18 to D-06
rear room lamp connector terminal No.2
AC509935AF
Connectors: C-206, C-218 <LHD>
C-218
C-206
Junction block side
Harness side
C-206
C-218
AC509943
Connector: C-218 <RHD>
AC
Junction block
(Rear view)
Junction block side
AC903885AT
Harness side
D-06 (GR)
Connector: D-06 <LHD>
Harness side
D-06 <SINGLE CAB>
D-06 <DOUBLE CAB>
AC903886 AN
Harness side
Connector: D-06 <RHD>
Harness side
D-06 <SINGLE CAB>
D-06 <DOUBLE CAB>
D-06 (GR)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст