Mitsubishi L200. Manual — part 884
TROUBLESHOOTING
AUTOMATIC AIR CONDITIONER
55B-65
Inspection Procedure 7: The rear window defogger does not work <Vehicles with rear panel power
window >
Rear Window Defogger Circuit
REAR WINDOW
DEFOGGER RELAY
REAR WINDOW
DEFOGGER SWITCH
REAR WINDOW
DEFOGGER
FUSIBLE
LINK
IGNITION
SWITCH (IG2)
20
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Grey R : Red P : Pink V : Violet PU : Purple
AC900631
REAR
PANEL
POWER
WINDOW-ECU
A/C-ECU
COMMENTS ON TROUBLE SYMPTOM
If the rear window defogger does not operate when
the rear window defogger switch is turned on, the
rear window defogger relay system may be defec-
tive.
PROBABLE CAUSES
• Malfunction of the automatic A/C control panel (A/
C-ECU)
• Malfunction of the rear panel power window-ECU
• Malfunction of the rear window defogger relay
• Damaged the wiring harness or connectors
• Malfunction of the rear window defogger
TROUBLESHOOTING
AUTOMATIC AIR CONDITIONER
55B-66
DIAGNOSIS PROCEDURE
STEP 1. Check the A/C operation.
Q: Do the A/C work normally?
YES :
Go to Step 2.
NO :
Refer to Inspection procedure 1 "Cool air
does not come
STEP 2. Connector check: D-11 rear panel power
window-ECU connector and D-08 rear window
defogger connector
AC509611AR
Connector: C-43 <LHD>
Harness side
AC509932AS
Harness side
Connector: C-43 <RHD>
AC509967AP
Harness side
Connector: D-08 <Double cab>
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Repair the connector.
STEP 3. Voltage measurement at D-08 rear
window defogger connector.
AC509967AP
Harness side
Connector: D-08 <Double cab>
(1) Disconnect the connector, and measure at the
wiring harness side.
(2) Turn the ignition switch to the "ON" position.
AC509611AR
Connector: C-43 <LHD>
Harness side
AC509932AS
Harness side
Connector: C-43 <RHD>
(3) Disconnect rear panel power window-ECU
connector D-11 and earth terminal 15.
AC402679
Connector D-08
(Harness side)
GV
(4) Measure the voltage between terminal 1 and
TROUBLESHOOTING
AUTOMATIC AIR CONDITIONER
55B-67
body earth.
OK: System voltage
Q: Is the check result normal?
YES :
Go to Step 11.
NO :
Go to Step 4.
STEP 4. Check the rear window defogger relay
continuity.
Refer to .
Q: Is the rear window defogger relay in good
condition?
YES :
Go to Step 5.
NO :
Replace the rear window defogger relay.
STEP 5. Voltage measurement at C-217 rear
window defogger relay connector.
AC509934AY
Connector: C-217 <LHD>
Junction block side
Junction block (Front view)
AC509936AV
Connector: C-217 <RHD>
Junction block side
Junction block (Front view)
(1) Remove the relay, and measure at the junction
block side.
AC402679
Connector C-217
(Harness side)
CC
(2) Measure the voltage between terminal 4 and
body earth.
OK: System voltage
Q: Is the check result normal?
YES :
Go to Step 7.
NO :
Go to Step 6.
STEP 6. Check the wiring harness between C-217
rear window defogger relay connector terminal
No.4 and the fusible link (20).
AC509934AZ
Connectors: C-213, C-217 <LHD>
Harness side
C-213
C-217
Junction block side
C-217
Junction block (Front view)
C-213
AC509936AW
Connectors: C-213, C-217 <RHD>
Harness side
C-213
C-217
Junction block side
C-217
Junction block (Front view)
C-213
NOTE: Prior to the wiring harness inspection, check
junction block connector C-213, and repair if neces-
sary.
• Check the rear window defogger relay power
supply line for open and short circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
Cope with Intermittent Malfunction ).
NO :
Repair the wiring harness.
TROUBLESHOOTING
AUTOMATIC AIR CONDITIONER
55B-68
STEP 7. Voltage measurement at C-217 rear
window defogger relay connector.
AC509934AY
Connector: C-217 <LHD>
Junction block side
Junction block (Front view)
AC509936AV
Connector: C-217 <RHD>
Junction block side
Junction block (Front view)
(1) Remove the relay, and measure at the junction
block side.
(2) Turn the ignition switch to the "ON" earth position.
AC402679
Connector C-217
(Harness side)
CD
(3) Voltage between terminal 1 and body earth.
OK: System voltage
Q: Is the check result normal?
YES :
Go to Step 9.
NO :
Go to Step 8.
STEP 8. Check the wiring harness between C-217
rear window defogger relay connector No.1 and
ignition switch (IG2).
AC509934 BA
Connectors: C-207, C-217 <LHD>
Harness side
C-207
C-217
C-207
C-217
Junction block side
Junction block (Front view)
AC509936AX
Connectors: C-207, C-217 <RHD>
Harness side
C-207
C-217
C-207
C-217
Junction block side
Junction block (Front view)
NOTE: Prior to the wiring harness inspection, check
junction block connector C-207, and repair if neces-
sary.
• Check the rear window defogger power supply
line for open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
Cope with Intermittent Malfunction ).
NO :
Repair the wiring harness.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст