Mitsubishi L200. Manual — part 734
MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)
CHASSIS ELECTRICAL
54A-303
Error contents
Cause
Action
Disc type error
The specification of the disc used
has a problem.
The disc used may have a problem. Check the
disc for scratches or dirt. Also, perform the
Inspection procedure 8 "CD/DVD cannot be
Played" of the troubleshooting. (Refer to
.)
AC804184
Play is impossible due to focus error.
Please eject the disk.
AG
ERROR MESSAGE SAMPLE
<English>
<Russian>
Error contents
Cause
Action
Focus error
The disc used has scratches and
dirt, and the data cannot be read.
The disc used may have a problem. Check the
disc for scratches or dirt. Also, perform the
Inspection procedure 8 "CD/DVD cannot be
Played" of the troubleshooting. (Refer to
AC804184
AC804184
Play is impossible.
Please eject the disk.
AE
ERROR MESSAGE SAMPLE
<English>
<Russian>
Error contents
Cause
Action
Disc error
The data of the disc used has a
malfunction, and the data cannot
be read.
The disc used may have a problem. Check the
disc for scratches or dirt. Also, perform the
Inspection procedure 8 "CD/DVD cannot be
Played" of the troubleshooting. (Refer to
.)
Seek error
Servo startup error
TOC read error
DVD-Video Disc
info error (Disc
information cannot
be read.)
MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)
CHASSIS ELECTRICAL
54A-304
AC804184AJ
ERROR MESSAGE SAMPLE
<English>
<Russian>
Play is impossible due to a
Mechanism error.
Error contents
Cause
Action
Power-on error
The DVD drive inside the
multivision display has a
malfunction.
Perform the Inspection procedure 8 "CD/DVD
cannot be Played" of the troubleshooting. (Refer
to
Pickup operation
error
Mecha stack error
Loading/eject error
AC804184 AI
ERROR MESSAGE SAMPLE
<English>
<Russian>
The region code is incorrect.
Please eject the disk.
(The region code is incorrect.
Please eject the disk.)
Error contents
Cause
Action
DVD-Video region
code error
The region code of the DVD does
not match the specification of the
multivision display.
Replace with the DVD that matches the
specification of the multivision display.
AC804184
The monitor panel is too hot.
AH
ERROR MESSAGE SAMPLE
<English>
<Russian>
Screen display has stopped to
protect the liquid crystal panel.
Wait unit the monitor panel has cooled down.
MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)
CHASSIS ELECTRICAL
54A-305
SERVICE MODE
M1546016600992
HOW TO INITIATE THE SERVICE MODE
1. With the navigation system active, press and hold
both the "NAVI" and "SET" buttons for 3.5
seconds.
2. The service mode will be initiated. Then "Service"
screen will be displayed.
Error contents
Cause
Action
Monitor high
temperature error
The inside temperature of the
monitor is 95
°C or more for 60
seconds or more.
The monitor turns OFF 5 seconds after the error
message appears. Wait until the temperature of
the monitor drops. The temperature drops, and
then the multivision display returns automatically.
ACB01771
Service
Vehicle Signal Check
Monitor Check
Camera Setting
Speaker Check
Network/Connect Line Check
Car Type Setting
Versions Indication
1/2
Sensor Check
Hands Free Module/USB BOX
Handle Setting
Back
Next
Previous
AB
<Vehicles without hands free ECU
and USB box>
ACB01772
Service
Vehicle Signal Check
Monitor Check
Camera Setting
Speaker Check
Network/Connect Line Check
Car Type Setting
Versions Indication
1/2
Sensor Check
Hands Free Module
Handle Setting
Back
Next
Previous
AB
<Vehicles with hands free ECU>
ACB01773
Service
Vehicle Signal Check
Monitor Check
Camera Setting
Speaker Check
Network/Connect Line Check
Car Type Setting
Versions Indication
1/2
Sensor Check
USB BOX
Handle Setting
Back
Next
Previous
AB
<Vehicles with USB box>
Service
Memory Initialization
TMC Sensitivity
Versions Log Information
2/2
Back
Next
Previous
ACB00873
Touch Switch Confirmation
MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)
CHASSIS ELECTRICAL
54A-306
HOW TO TERMINATE THE SERVICE MODE
If the operations below are done, the service mode
will be terminated.
• If "Back" button is selected on "Service" screen,
the service mode will terminate and then return to
the previous screen.
• If "NAVI" button is pressed with the service mode
active, the service mode will terminate and
change to the navigation screen.
NOTE: If "NAVI" button is pressed, the following
functions of the service mode will terminate.
.
•
Vehicle Signal Check
•
Monitor Check
•
Network/Connect Line Check
•
Speaker Check
•
Car Type Setting
•
Versions Indication
•
Sensor Check
•
Hands Free Module <Vehicles with hands
free ECU>
•
USB BOX <Vehicles with USB box>
•
Handle Setting
•
Memory Initialization
•
TMC Sensitivity
•
Versions Log Information
•
Touch Switch Confirmation
VEHICLE SIGNAL CHECK
1. Select "Vehicle Signal Check" on "Service"
screen.
2. The check results will be displayed for the items
below.
• "Speed": "ON" when the vehicle speed is 6 km/h
or more, and "OFF" when the vehicle speed is 4
km/h or less.
• "ILL": "ON" when the headlamps are on, and
"OFF" when they are off.
• "Shift Position R": "ON" when the selector lever is
at R position, and "OFF" when it is at the other
position.
MONITOR CHECK
1. Select "Monitor Check" on "Service" screen.
2. Eight colour bars will be displayed.
3. When "Enter" is pressed on the navigation unit
joystick while the eight colour bars are shown,
grey scale will be displayed with a 16-step
gradation.
ACB01771
Service
Vehicle Signal Check
Monitor Check
Camera Setting
Speaker Check
Network/Connect Line Check
Car Type Setting
Versions Indication
1/2
Sensor Check
Hands Free Module/USB BOX
Handle Setting
Back
Next
Previous
AC704593
Back
Vehicle Signal Check
Speed
ILL
Shift Position R
: OFF
: ON
: OFF
AB
ACB01771
Service
Vehicle Signal Check
Monitor Check
Camera Setting
Speaker Check
Network/Connect Line Check
Car Type Setting
Versions Indication
1/2
Sensor Check
Hands Free Module/USB BOX
Handle Setting
Back
Next
Previous
AC611390
AD
AC606321
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст