Mitsubishi L200. Manual — part 503
DOOR
BODY
42-72
STEP 9. Check the wiring harness between C-220
ETACS-ECU connector terminal Nos. 22, 23 and
E-04 front door lock actuator (RH) connector
terminal Nos. 6, 4.
AC509934
Connector: C-220 <LHD>
AM
Junction block
Harness side
AC509954AD
Harness side
E-04 (B)
Connector: E-04 <LHD>
NOTE:
AC805686AQ
Connectors: C-32, C-133 <LHD>
C-133
C-133
C-32 (GR)
C-32 (GR)
AC903853
Connector: C-122 <LHD>
AG
Prior to the wiring harness inspection, check interme-
diate connector C-122 and junction block connector
C-32, and repair if necessary.
• Check the power supply line for open and short
circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
Malfunction ).
NO :
Repair the wiring harness.
STEP 10. Connector check: E-07 rear door lock
actuator (RH) connector
AC509958AB
Harness side
E-07 (B)
Connector: E-07
Q: Is the check result normal?
YES :
Go to Step 11.
NO :
Repair the defective connector.
STEP 11. Check the rear door lock actuator (RH).
Check that the rear door lock actuator (RH) is in
good condition. Refer to
.
Q: Is the check result normal?
YES :
Go to Step 12.
NO :
Replace the tailgate lock actuator.
STEP 12. Connector check: C-220 ETACS-ECU
connector
AC509934
Connector: C-220 <LHD>
AM
Junction block
Harness side
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Repair the defective connector.
DOOR
BODY
42-73
STEP 13. Check the wiring harness between C-
220 ETACS-ECU connector terminal Nos. 22, 23
and E-07 rear door lock actuator (RH) connector
terminal Nos. 6, 4.
AC509934
Connector: C-220 <LHD>
AM
Junction block
Harness side
AC509958AB
Harness side
E-07 (B)
Connector: E-07
NOTE:
AC805687
Connector: C-16 <LHD>
AJ
AC509611AL
Connector: C-32 <LHD>
C-32 (GR)
AC509967AC
Connector: D-24 <LHD>
Prior to the wiring harness inspection, check interme-
diate connectors C-16, D-24 and junction block con-
nector C-32, and repair if necessary.
• Check the power supply line for open and short
circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
Malfunction ).
NO :
Repair the wiring harness.
DOOR
BODY
42-74
STEP 14. Connector check: E-12 rear door lock
actuator (LH) connector
AC509956AB
Harness side
Connector: E-12
E-12 (B)
Q: Is the check result normal?
YES :
Go to Step 15.
NO :
Repair the defective connector.
STEP 15. Check the rear door lock actuator (LH).
Check that the rear door lock actuator (LH) is in good
condition. Refer to
Q: Is the check result normal?
YES :
Go to Step 16.
NO :
Replace the tailgate lock actuator.
STEP 16. Connector check: C-220 ETACS-ECU
connector
AC509934
Connector: C-220 <LHD>
AM
Junction block
Harness side
Q: Is the check result normal?
YES :
Go to Step 17.
NO :
Repair the defective connector.
DOOR
BODY
42-75
STEP 17. Check the wiring harness between C-
220 ETACS-ECU connector terminal Nos. 22, 23
and E-12 rear door lock actuator (LH) connector
terminal Nos. 6, 4.
AC509934
Connector: C-220 <LHD>
AM
Junction block
Harness side
AC509956AB
Harness side
Connector: E-12
E-12 (B)
NOTE:
AC805687
Connector: C-16 <LHD>
AJ
AC509611AL
Connector: C-32 <LHD>
C-32 (GR)
AC509967AB
Connector: D-14 <LHD>
Prior to the wiring harness inspection, check interme-
diate connectors C-16, D-14 and junction block con-
nector C-32, and repair if necessary.
• Check the power supply line for open and short
circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
Malfunction ).
NO :
Repair the wiring harness.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст