Mitsubishi L200. Manual — part 308
TRANSMISSION ASSEMBLY
AUTOMATIC TRANSMISSION
23A-139
REMOVAL AND INSTALLATION <5A/T>
M1231117000551
Pre-removal Operation
• Under Skid Plate and Engine Room Under Cover
Removal (Refer to GROUP 51
− Under Cover .)
• A/T Fluid Draining (Refer to
.)
• Transfer Oil Draining (Refer to
).
• Front and Rear Propeller Shaft Removal (Refer to
GROUP 25
− Propeller Shaft .)
• Front Exhaust Pipe and Front Exhaust Pipe Bracket
Removal (Refer to GROUP 15
− Exhaust Pipe and Main
Muffler .)
• Transmission Control Cable Connection Removal (Refer
to
.)
• Pipe Assembly Removal (Refer to
.)
• Starter Assembly Removal (Refer to GROUP 16 − Starter
Motor Assembly .)
• Transfer Control Lever Assembly Removal (Refer to
.)
• No.2 Crossmember Assembly Removal (Refer to GROUP
32
− Rear Engine Mounting .)
Post-installation Operation
• No.2 Crossmember Assembly Installation (Refer to
GROUP 32
− Rear Engine Mounting .)
• Transfer Control Lever Assembly Installation (Refer to
.)
• Starter Assembly Installation (Refer to GROUP 16 −
Starter Motor Assembly .)
• Pipe Assembly Installation (Refer to
.)
• Transmission Control Cable Connection Installation
(Refer to
.)
• Front Exhaust Pipe and Front Exhaust Pipe Bracket
Installation (Refer to GROUP 15
−Exhaust Pipe and Main
Muffler .)
• Front and Rear Propeller Shaft Installation (Refer to
GROUP 25
− Propeller Shaft .)
• Transfer Oil Supplying (Refer to
).
• A/T Fluid Supplying (Refer to
.)
• Under Skid Plate and Engine Room Under Cover Installa-
tion (Refer to GROUP 51
− Under Cover .)
AC903384
1
N
22 ± 4 N·m
50 ± 7 N·m
5
9.0 ± 1.0 N·m
7
49 ± 3 N·m
AD
8
9
7
48 ± 6 N·m
48 ± 6 N·m
11 ± 1 N·m
3
10
6
4
8
48 ± 6 N·m
2
REMOVAL STEPS
1.
Oil level gauge assembly
2.
O-ring
3.
Harness connector connection
4.
A/T control harness connector
connection
5.
Bell housing cover
6.
Dust seal guard
7.
Drive plate connecting bolts
8.
Transmission assembly lower part
coupling bolts
•
Support the transmission with a
transmission jack
9.
Transmission assembly upper part
coupling bolts
>>
A
<< 10.
Transmission assembly
REMOVAL STEPS (Continued)
TRANSMISSION ASSEMBLY
AUTOMATIC TRANSMISSION
23A-140
INSTALLATION SERVICE POINT
>>A<< TRANSMISSION ASSEMBLY INSTALLA-
TION
AC004836AI
Approx. 21.0 mm
Press the torque converter into the transmission
properly, and then assembly into the engine.
A/T FLUID COOLER
AUTOMATIC TRANSMISSION
23A-141
A/T FLUID COOLER
REMOVAL AND INSTALLATION
M1231128700372
Pre-removal and Post-installation Operation
• Under Skid Plate and Engine Room Under Cover
Removal and Installation.
• A/T Fluid Draining and Refilling (Refer to
<Vehicles with air cooled A/T fluid
cooler>
AC509593
1
3
4
9
6
7
10
8
11
12 ± 2 N·m
48 ± 7 N·m
5
2
2
N
N
AE
Removal steps
1.
Cooler hose
2.
Gasket
3.
Hose
4.
A/T fluid cooler assembly
5.
Pipe assembly
6.
Return hose
7.
Return pipe
8.
Hose
9.
Feed hose
10. Cooler hose
11. Cooler pipe assembly
Removal steps (Continued)
A/T FLUID COOLER
AUTOMATIC TRANSMISSION
23A-142
<Vehicles without air cooled A/T fluid
cooler>
AC807090
6
3
4
7
5
8
48 ± 7 N·m
1
N
N
AC
11 ± 2 N·m
11 ± 2 N·m
5.0 ± 1.0 N·m
5.0 ± 1.0 N·m
5.0 ± 1.0 N·m
2
2
Removal steps
1.
Pipe assembly
2.
Gasket
3.
Return hose
4.
Return pipe
5.
Hose
6.
Feed hose
7.
Cooler hose
8.
Cooler pipe assembly
Removal steps (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст