Mitsubishi L200. Manual — part 524
DOOR
BODY
42-156
YES :
Go to Step 4.
NO :
Make the power window switch learn the
fully closed position of the windows (Refer
to
STEP 4. Determine a trouble spot.
Q: Which door does the power window anti-trap
function fail on?
Driver's door :
Go to Step 5.
Front passenger's door :
Go to Step 8.
Rear right door <Double cab> :
Go to Step 14.
Rear left door <Double cab> :
Go to Step 20.
STEP 5. Connector check: E-03 power window
main switch connector and E-18 power window
motor (front: LH) connector
AC509952
Connectors: E-03, E-18 <LHD>
AG
Harness side
E-03
E-03
Harness side
E-18 (B)
E-18 (B)
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Repair the defective connector.
STEP 6. Check the wiring harness between E-03
power window main switch connector terminal
Nos. 8, 9, 10, 12 and E-18 power window motor
(front: LH) connector terminal Nos. 6, 2, 4, 5.
AC509952
Connectors: E-03, E-18 <LHD>
AG
Harness side
E-03
E-03
Harness side
E-18 (B)
E-18 (B)
• Check the input and output lines to the revolution
detection sensor for open and short circuit.
Q: Is the check result normal?
YES :
Go to Step 7.
NO :
Repair the wiring harness.
STEP 7. Retest the system.
(1) Replace the power window main switch.
(2) Check that the driver's power window anti-trap
function works.
Q: Is the check result normal?
YES :
The procedure is complete.
NO :
Replace the power window motor (front:
LH).
STEP 8. Connector check: E-01 power window
motor (front: RH) connector
AC509954
Connectors: E-01 <LHD>
AK
Harness side
E-01 (B)
Q: Is the check result normal?
YES :
Go to Step 9.
NO :
Repair the defective connector.
STEP 9. Resistance measurement at the E-01
power window motor (front: RH) connector.
AC509954
Connectors: E-01 <LHD>
AK
Harness side
E-01 (B)
(1) Disconnect the connector, and measure at the
wiring harness side.
AC209731
AC208731BI
Connector E-01
(Harness side)
(2) Check the resistance between E-01 power
DOOR
BODY
42-157
window motor (front RH) connector terminal No.6
and body earth.
OK: Continuity exists (2
Ω or less)
Q: Is the check result normal?
YES :
Go to Step 11.
NO :
Go to Step 10.
STEP 10. Check the wiring harness between E-01
power window motor (front: RH) connector
terminal No.6 and body earth.
AC509954
Connectors: E-01 <LHD>
AK
Harness side
E-01 (B)
NOTE:
AC903853
Connector: C-122 <LHD>
AG
Prior to the wiring harness inspection, check interme-
diate connector C-122 and repair if necessary.
• Check the input and output lines to the revolution
detection sensor for open or short circuit.
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Repair the wiring harness.
STEP 11. Connector check: E-26 power window
sub switch (front) connector
AC509954
Connector: E-26 <LHD>
AJ
Harness side
Q: Is the check result normal?
YES :
Go to Step 12.
NO :
Repair the defective connector.
STEP 12. Check the wiring harness between E-26
power window sub switch (front) connector
terminal Nos. 2, 3, 8 and E-01 power window
motor (front: RH) connector terminal Nos. 2, 5, 4.
AC509954
Connectors: E-01, E-26 <LHD>
AH
Harness side
E-26
E-26
Harness side
E-01 (B)
E-01 (B)
• Check the input and output lines to the revolution
detection sensor for open and short circuit.
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Repair the wiring harness.
STEP 13. Retest the system.
(1) Replace the power window sub switch (front).
(2) Check that the front passenger's power window
anti-trap function works.
Q: Is the check result normal?
YES :
The procedure is complete.
NO :
Replace the power window motor (front:
RH).
DOOR
BODY
42-158
STEP 14. Connector check: E-05 power window
motor (rear: RH) connector
AC509958
Connector: E-05
AE
Harness side
E-05 (B)
Q: Is the check result normal?
YES :
Go to Step 15.
NO :
Repair the defective connector.
STEP 15. Resistance measurement at the E-05
power window motor (rear: RH) connector.
AC509958
Connector: E-05
AE
Harness side
E-05 (B)
(1) Disconnect the connector, and measure at the
wiring harness side.
AC209731
AC208731BJ
Connector E-05
(Harness side)
(2) Check the resistance between E-05 power
window motor (rear: RH) connector terminal No.6
and body earth
OK: Continuity exists (2
Ω or less)
Q: Is the check result normal?
YES :
Go to Step 17.
NO :
Go to Step 16.
STEP 16. Check the wiring harness between E-05
power window motor (rear: RH) connector
terminal No.6 and body earth.
AC509958
Connector: E-05
AE
Harness side
E-05 (B)
NOTE:
AC509967AC
Connector: D-24 <LHD>
Prior to the wiring harness inspection, check interme-
diate connector D-24, and repair if necessary.
• Check the input and output lines to the revolution
detection sensor for open or short circuit.
Q: Is the check result normal?
YES :
Go to Step 19.
NO :
Repair the wiring harness.
STEP 17. Connector check: E-06 power window
sub switch (rear: RH) connector
AC509958
Connector: E-06
AD
Harness side
Q: Is the check result normal?
YES :
Go to Step 18.
NO :
Repair the defective connector.
DOOR
BODY
42-159
STEP 18. Check the wiring harness between E-06
power window sub switch (rear: RH) connector
terminal Nos. 2, 3, 8 and E-05 power window
motor (rear: RH) connector terminal Nos. 4, 5, 2.
AC509958
Connectors: E-05, E-06
AC
E-06
Harness side
E-05 (B)
E-05 (B)
Harness side
E-06
• Check the input and output lines to the revolution
detection sensor for open and short circuit.
Q: Is the check result normal?
YES :
Go to Step 19.
NO :
Repair the wiring harness.
STEP 19. Retest the system.
(1) Replace the power window sub switch (rear: RH).
(2) Check that the rear right power window anti-trap
function works.
Q: Is the check result normal?
YES :
The procedure is complete.
NO :
Replace the power window motor (rear:
RH).
STEP 20. Connector check: E-14 power window
motor (rear: LH) connector
AC509956
Connector: E-14
AE
Harness side
E-14 (B)
Q: Is the check result normal?
YES :
Go to Step 21.
NO :
Repair the defective connector.
STEP 21. Resistance measurement at the E-14
power window motor (rear: LH) connector.
AC509956
Connector: E-14
AE
Harness side
E-14 (B)
(1) Disconnect the connector, and measure at the
wiring harness side.
AC209731
AC208731BK
Connector E-14
(Harness side)
(2) Check the resistance between E-14 power
window motor (rear: LH) connector terminal No.6
and body earth
OK: Continuity exists (2
Ω or less)
Q: Is the check result normal?
YES :
Go to Step 23.
NO :
Go to Step 22.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст