Mitsubishi L200. Manual — part 765
HANDS FREE-ECU
CHASSIS ELECTRICAL
54A-427
1. Display the pairing list screen, and select "New
Device."
NOTE: When the vehicle is being driven, or when
the vehicle is driven during the pairing operation,
"This function is disabled while driving." is dis-
played for 4 seconds, and the display returns to
the pairing list screen.
2. Enter the 4-digit code on the Pin code screen, and
select "Enter."
3. "Begin Pairing procedure on device. See device's
manual for instructions." is displayed on the
screen.
4. Refer to the owner’s manual for your device and
enter into the device the pin code.
NOTE: When "Cancel" is selected or the pairing is
failed, the display returns to the pairing list screen.
5. When the pairing is completed, the display returns
to the pairing list screen.
NOTE: When 7 Bluetooth
®
devices are already
paired to the hands free ECU, "Maximum device
paired. Please delete a paired device before pairing
a new device." is displayed.
DELETE OPERATION OF BLUETOOTH
®
DEVICE
1. Display the pairing list screen, and select the
"Bluetooth
® device" to be deleted.
2. Select "Delete."
Back
New Device
Registered Device Name 2
Registered Device Name 3
Registered Device Name 4
Empty
Registered Device Name 1
10:00
Pairing
AC904199
Enter
Back
Clear
3
10:00
Pin Code
2
1
1 2 3 4
6
5
4
9
8
0
7
Please enter the Pin Code (4 Digits)
AC904203
Back
New Device
Registered Device Name 2
Registered Device Name 3
Registered Device Name 4
Registered Device Name 5
Registered Device Name 1
10:00
Pairing
AC904204
Back
New Device
Registered Device Name 2
Registered Device Name 3
Registered Device Name 4
Registered Device Name 5
Registered Device Name 1
10:00
Pairing
AC904204
Back
10:00
Pairing
Name
Device ID
Connection
Delete
Voice Tag
Hands Free
Bluetooth Audio
Registered Device Name 3
ID-00000003
AC904205
10:00
Pairing
Delete this paired device ?
Yes
No
AC904207
Back
New Device
Registered Device Name 2
Empty
Registered Device Name 4
Empty
Registered Device Name 1
10:00
Pairing
AC904208
HANDS FREE-ECU
CHASSIS ELECTRICAL
54A-428
3. When "Yes" is selected, the Bluetooth
® device is
deleted and the display returns to the pairing list
screen.
ERASE THE PASSWORD
M1544403800482
The 4-digit password set by security function can be
erased by the diagnosis mode. Perform the
"UNLOCK" operation of the diagnosis mode. (Refer
to
ENGLISH SELECTION USING AUDIO
SYSTEM <VEHICLES WITH RADIO AND
CD PLAYER (TYPE 2)>
M1544406600023
The language can be switched between Australian
English and British English by using the MENU mode
of the radio and CD player when the user has
selected English as the voice recognition language
of the hands free system. The initial setting of the
radio and CD player is set to British English. If the
language setting of the radio and CD player is
changed, the setting will be held until the radio and
CD player is reset.
NOTE: When the radio and CD player defaults to the
initial setting by replacing the radio and CD player or
by removing the battery, set the radio and CD player
again.
Procedure for selecting voice recognition
language between Australian English and British
English
1. Turn the ignition switch to the ACC position.
2. Press the "MENU" button of the radio and CD
player shortly to switch to the MENU mode.
3. Repeat pressing the "MENU" button of the radio
and CD player shortly until the "English-type on
phone call" menu is displayed on the MENU mode
screen.
4. By pressing the "TUNE/SEEK (Up-step/Up-seek)"
button or the "TUNE/SEEK (Down-step/Down-
seek)" button of the radio and CD player while the
"English-type on phone call" menu is displayed,
the display will switch between Australian English
and British English.
5. After selecting the language, shortly press the
"MENU" button of the radio and CD player to exit
the MENU mode.
6. Turn the ignition switch to the "LOCK" (OFF)
position, and after approximately 30 seconds, turn
it to the ON position again. The language will be
switched.
ACB00893
"MENU" button
"English-type on phone call" MENU screen
AB
AC703229
RELEASE
"English-type on phone call" MENU screen
AB
"TUNE/SEEK
(Up-step/Up-seek)"
button
"TUNE/SEEK
(Down-step/Down-seek)"
button
Press the "TUNE/SEEK
(Up-step/Up-seek)"
button.
Press the "TUNE/SEEK
(Down-step/Down-seek)"
button.
British English screen
Australian English screen
HANDS FREE-ECU
CHASSIS ELECTRICAL
54A-429
HANDS FREE ECU REMOVAL AND INSTALLATION
M1544405400286
ACB00884 AB
1
4
3
2
Removal steps
•
Glove box, glove box cover (Refer
to GROUP 52A, Instrument panel
assembly )
1.
Hands free ECU and bracket
•
Harness connector connection
2.
USB cable
3.
Bracket
4.
Hands free ECU
Removal steps (Continued)
HANDS FREE-ECU
CHASSIS ELECTRICAL
54A-430
MICROPHONE UNIT REMOVAL AND
INSTALLATION
M1546023300294
ACB01722
<Vehicles without sunroof>
<LHD>
<RHD>
<RHD>
<LHD>
<LHD>
<Vehicles with sunroof>
<RHD>
AB
1
A
A
1
Direction mark
Direction mark
1
1
Direction mark
1
Claw
Claw
Direction mark
Direction mark
Section A - A
1
Claw
Claw
Section A - A
A
A
A
A
A
A
Direction mark
Removal Step
>>
A
1.
Microphone unit
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст