Mitsubishi L200. Manual — part 620
TROUBLESHOOTING
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
52B-151
STEP 3. Connector lock check: SRS-ECU
connector C-153 and side-airbag module (LH)
connector D-35. (M.U.T.-III diagnosis code)
(1) Disconnect the negative battery terminal.
AC801404
AL
Connector: C-153
C-153 (Y)
Harness side
connector
(rear view)
AC903877
Connector: D-35 <LHD>
<CLUB CAB>
D-35 (Y)
Harness side
connector
(rear view)
AH
AC903879AF
Connector: D-35 <RHD>
<CLUB CAB>
D-35 (Y)
Harness side
connector
(rear view)
AC903885AO
Connector: D-35 <LHD>
<DOUBLE CAB>
D-35 (Y)
Harness side
connector
(rear view)
AC903886 AJ
Connector: D-35 <RHD>
<DOUBLE CAB>
D-35 (Y)
Harness side
connector
(rear view)
AC706606
AF
Locking button
TROUBLESHOOTING
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
52B-152
(2) Disconnect connectors C-153 and D-35, and then
reconnect them. When disconnecting connector
D-35, unlock the connector by sliding the locking
button to the direction of the arrow as shown in
the figure, and then disconnect the connector.
(3) Connect the negative battery terminal.
(4) Erase the diagnosis code memory, and check the
diagnosis code.
Q: Is diagnosis code B1430 set?
YES :
Go to Step 4
NO :
The procedure is complete. It is assumed
that diagnosis code B1430 set as connector
C-153 or D-35 was engaged improperly.
TROUBLESHOOTING
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
52B-153
STEP 4. Check the diagnosis code by connecting
a dummy resistor. (M.U.T.-III diagnosis code)
(1) Disconnect the negative battery terminal.
AC903877
Connector: D-35 <LHD>
<CLUB CAB>
D-35 (Y)
Harness side
connector
(rear view)
AH
AC903879AF
Connector: D-35 <RHD>
<CLUB CAB>
D-35 (Y)
Harness side
connector
(rear view)
AC903885AO
Connector: D-35 <LHD>
<DOUBLE CAB>
D-35 (Y)
Harness side
connector
(rear view)
AC903886 AJ
Connector: D-35 <RHD>
<DOUBLE CAB>
D-35 (Y)
Harness side
connector
(rear view)
AC706606
AF
Locking button
(2) Disconnect side-airbag module (LH) connector
TROUBLESHOOTING
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
52B-154
D-35. When disconnecting connector D-35,
unlock the connector by sliding the locking button
to the direction of the arrow as shown in the
figure, and then disconnect the connector.
AC507310 BH
D-35
Side-airbag
module (LH) connector
D-35
Harness side
connector
MB991865
(Dummy resistor: 3 )
MB991866
(Resistor harness)
(3) Connect special tool dummy resistor (MB991865)
to special tool resistor harness (MB991866).
CAUTION
Do not insert a test probe into the terminal from
its front side directly as the connector contact
pressure may be weakened.
(4) Insert special tool (MB991866) into the harness
side connector D-35 by backprobing.
(5) Connect the negative battery terminal.
(6) Erase the diagnosis code memory, and check the
diagnosis code.
Q: Is diagnosis code B1430 set?
YES :
Go to Step 5
NO :
Replace the front seatback assembly (LH)
(Refer to
).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст