Mitsubishi L200. Manual — part 541
SUNROOF ASSEMBLY
BODY
42-224
Inspection Procedure 2: Any of The Sunroof Switch Positions is Defective.
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
Sunroof Switch Circuit
SUNROOF MOTOR
ASSEMBLY
SUNROOF
SWITCH
ECU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Grey R : Red P : Pink V : Violet PU : Purple
COMMENTS ON TROUBLE SYMPTOM
If any of the sunroof switch positions is defective, the
communication line between the sunroof switch and
the sunroof motor assembly (sunroof-ECU) may be
defective.
PROBABLE CAUSES
• Malfunction of the sunroof switch
• Malfunction of the sunroof motor assembly (sun-
roof-ECU)
• Damaged harness wires and connectors
SUNROOF ASSEMBLY
BODY
42-225
DIAGNOSIS PROCEDURE
STEP 1. Connector check: D-29 sunroof switch
connector
AC903885AI
Connector: D-28, D-29 <LHD>
Harness side
D-29 (B)
D-29 (B)
D-28
D-28
Harness side
AC903886AG
Connector: D-28, D-29 <RHD>
Harness side
D-29 (B)
D-29 (B)
D-28
D-28
Harness side
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Repair the connector.
STEP 2. Check the sunroof switch.
Check that the sunroof switch works normally. Refer
to
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Replace the sunroof switch.
STEP 3. Connector check: D-28 sunroof motor
assembly connector
AC903885AI
Connector: D-28, D-29 <LHD>
Harness side
D-29 (B)
D-29 (B)
D-28
D-28
Harness side
AC903886AG
Connector: D-28, D-29 <RHD>
Harness side
D-29 (B)
D-29 (B)
D-28
D-28
Harness side
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Repair the connector.
STEP 4. Retest the system.
Q: Which switch position is defective?
"TILT UP" :
Go to Step 5.
"OPEN" :
Go to Step 6.
"CLOSE/DOWN" :
Go to Step 7.
SUNROOF ASSEMBLY
BODY
42-226
STEP 5. Check the wiring harness between D-28
sunroof motor assembly connector terminal No.1
and D-29 sunroof switch connector terminal
No.3.
AC903885AI
Connector: D-28, D-29 <LHD>
Harness side
D-29 (B)
D-29 (B)
D-28
D-28
Harness side
AC903886AG
Connector: D-28, D-29 <RHD>
Harness side
D-29 (B)
D-29 (B)
D-28
D-28
Harness side
• Check the communication line for open and short
circuit.
Q: Is the check result normal?
YES :
Replace the sunroof motor assembly.
NO :
Repair the wiring harness.
STEP 6. Check the wiring harness between D-28
sunroof motor assembly connector terminal No.6
and D-29 sunroof switch connector terminal
No.5.
AC903885AI
Connector: D-28, D-29 <LHD>
Harness side
D-29 (B)
D-29 (B)
D-28
D-28
Harness side
AC903886AG
Connector: D-28, D-29 <RHD>
Harness side
D-29 (B)
D-29 (B)
D-28
D-28
Harness side
• Check the communication line for open and short
circuit.
Q: Is the check result normal?
YES :
Replace the sunroof motor assembly.
NO :
Repair the wiring harness.
SUNROOF ASSEMBLY
BODY
42-227
STEP 7. Check the wiring harness between D-28
sunroof motor assembly connector terminal No.5
and D-29 sunroof switch connector terminal
No.6.
AC903885AI
Connector: D-28, D-29 <LHD>
Harness side
D-29 (B)
D-29 (B)
D-28
D-28
Harness side
AC903886AG
Connector: D-28, D-29 <RHD>
Harness side
D-29 (B)
D-29 (B)
D-28
D-28
Harness side
• Check the communication line for open and short
circuit.
Q: Is the check result normal?
YES :
Replace the sunroof motor assembly.
NO :
Repair the wiring harness.
Inspection Procedure 3: Sunroof Anti-trap Function does not Work Normally.
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
If the sunroof anti-trap function does not work, the
sunroof motor assembly (sunroof-ECU) may be
defective.
PROBABLE CAUSE
• Malfunction of the sunroof motor assembly (sun-
roof-ECU)
DIAGNOSIS PROCEDURE
Retest the system.
Check that the sunroof anti-trap function works nor-
mally.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
Malfunction ).
NO :
Replace the sunroof motor assembly.
ON-VEHICLE SERVICE
WATER TEST
M1426000900531
Check if there are any leaks in the sunroof by the fol-
lowing procedures:
1. Fully close the sunroof lid glass.
2. Adjust the water pressure so that water comes out
of the hose to a height of approx. 50 cm when the
hose is held vertically facing upwards.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст