Mitsubishi Lancer (4A9 engine). Manual — part 174
MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)
CHASSIS ELECTRICAL
54A-358
NOTE:
If there is "NG" or "N/A" as the check results,
select "NG Code" on the "Sensor Check" screen.
Then "NG code Indication" screen will show the
NG code.
NG CODE REFERENCE TABLE FOR SENSOR
CHECK
HANDS FREE MODULE <VEHICLES WITH
HANDS FREE ECU>
1. Select "Hands Free Module" on "Service" screen.
NOTE: For item "Hands Free Module", refer or
Hands Free ECU
−
Diagnosis Mode .)
USB BOX <VEHICLES WITH USB BOX>
1. Select "USB BOX" on "Service" screen.
NOTE: For item "USB BOX", refer or USB Box
−
Diagnosis Mode .)
HANDLE SETTING
1. Select "Handle Setting" on "Service" screen.
2. Select the currently-set handle to display.
3. To change the handle setting, select the handle to
be changed to, and then select "Set."
NOTE: Even when the handle is selected, the
selected handle will not be set if "Back" is
selected.
Sensor
classific
ation
NG
Code
No.
Error items
Gyro
sensor
1
Offset error while the vehicle is
stationary (lower limit error)
2
Offset error while the vehicle is
stationary (upper limit error)
5
Output error during driving
Speed
sensor
6
Output error while the vehicle is
stationary
Back
NG Code Indication
Gyro Sensor
5
AC606336
Service
Vehicle Signal Check
Monitor Check
Camera Setting
Speaker Check
Network/Connect Line Check
Versions Indication
1/2
Sensor Check
Hands Free Module
Memory Initialization
Back
Next
Previous
CAN Communication Confirmation
AC903640
<Vehicles with hands free ECU>
AD
Service
Vehicle Signal Check
Monitor Check
Camera Setting
Speaker Check
Network/Connect Line Check
Versions Indication
1/2
Sensor Check
USB BOX
Memory Initialization
Back
Next
Previous
CAN Communication Confirmation
AC904700
AB
<Vehicles with USB box>
ACB01837
Service
Vehicle Signal Check
Monitor Check
Camera Setting
Speaker Check
Network/Connect Line Check
Car Type Setting
Versions Indication
1/2
Sensor Check
Hands Free Module/USB BOX
Handle Setting
Back
Next
Previous
AC7070627
Handle Setting
Back
Set
AB
RHD
LHD
MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)
CHASSIS ELECTRICAL
54A-359
CAN COMMUNICATION CONFIRMATION
<VEHICLES FOR RUSSIA>
1. Select "CAN Communication Confirmation" on
"Service" screen.
2. If "List Of Connection Equipment" is selected on
"CAN Communication Confirmation" screen, the
system will determine which equipment is
installed according to the connected equipment
reference table. Then the equipment which are
connected to the CAN box unit will be displayed.
CAN BOX UNIT-CONNECTED EQUIPMENT REF-
ERENCE TABLE
3. If "Version Indication" is selected on "CAN
Communication Confirmation" screen, the version
for each item is displayed.
4. If "CAN BOX Memory Data Indication" is selected
on "CAN Communication Confirmation" screen,
"CAN BOX Memory Data Indication" will be
displayed.
5. If any item is selected on "CAN BOX Memory
Data Indication" screen, its relevant information is
displayed.
•
Various Data
Screen indication
Equipment
HVAC
A/C-ECU
FCM
ETACS-ECU
Service
Vehicle Signal Check
Monitor Check
Camera Setting
Speaker Check
Network/Connect Line Check
Versions Indication
1/2
Sensor Check
Hands Free Module
Memory Initialization
Back
Next
Previous
CAN Communication Confirmation
AC903640
AB
CAN Communication Confirmation
List Of Connection Equipment
Version Indication
CAN BOX Memory Data Indication
Back
AC606340
CAN List Of Connection Equipment
HVAC
CCN
WCM
FCM
ORC
Back
AC904730
ORC
SRS-ECU
CCN
Combination meter
WCM
Wireless control module
Screen indication
Equipment
Version Indication
Hardware : 1.2
CAN MATRIX : 05.25
NM : 43.24
DIAG : 00h
TPMC : 33.11
Software : 01.02.03
CAN DRIVER : 73.00
KWP2000 : 49.10
Back
DBKOM : 49.17
AC606342
CAN BOX Memory Data Indication
Various Data
Coding Data
VIN
Tell-Tale Stack
Chrono Stack
Back
AC606343
Various Data
Origin : 04h Supplier : 85h
System ID : 08h Variation ID : 10h
Serial ID : 0000h
ECU Part Number : 008750A90
ECU Serial Number : 01234567890123
Back
AC601530
MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)
CHASSIS ELECTRICAL
54A-360
•
Coding Data
•
VIN
•
Tell-Tale Stack
•
Chrono Stack
MEMORY INITIALIZATION
1. Select "Memory Initialization" on "Service" screen.
2. If you select "Start" on "Memory Initialization"
screen, the settings such as registered locations
and music server will be erased (initialised) from
the memory.
NOTE: If the ignition switch is turned to "LOCK"
(OFF) position during the initialisation, the initiali-
sation will be suspended. If the ignition switch is
turned to "ACC" or "ON" position, the initialisation
will be resumed.
3. After the memory initialisation is complete, the
navigation system will restart automatically.
Coding Data
Coding Data : 4000h
Back
AC606345
VIN
current VIN
0123456 0123456 012
Original VIN
0123456 0123456 012
Back
AC606346
Tell-Tale Stack
Historical
DTC : C197h
Odometer : 0132h
Interrogation
DTC Read Counter : 04h
Odometer : 01a5h
Back
Next
Previ
2/8
AC606347
Chrono Stack
DTC Value : 0197h
DTC Status : A0h
Odometer Mileage : 1B27h
Accumulation Timer : 06C4h
IG Counter : 15h
Back
Next
Previ
2/8
AC606348
Service
Vehicle Signal Check
Monitor Check
Camera Setting
Speaker Check
Network/Connect Line Check
Versions Indication
1/2
Sensor Check
Hands Free Module
Memory Initialization
Back
Next
Previous
CAN Communication Confirmation
AC903640
AB
Back
Start
Memory Initialization
You can erase all of the back up data.
After erasing the data, the system will reboot.
If you push Start, the data will be deleted.
AC606338
AB
ln Early Period Of Memory
Please do not switch off until rebooting is completed.
AC606339
AB
MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)
CHASSIS ELECTRICAL
54A-361
TMC SENSITIVITY
1. Select "TMC sensitivity" on "Service" screen.
2. The information of TMC station is displayed.
NOTE: When the now-received information is
from selected TMC station, "TMC_station" is dis-
played on the upper right of the screen. "
−
" is dis-
played when the information is not received.
3. Select "TMC Search" on the "TMC information"
screen to search the TMC station that can be
received, and update and display the contents of
"Found station list".
4. Select "TMC station" displayed on the "Found
station list" and press "decision" switch to update
the received TMC station and return to the "TMC
information" screen. The information of selected
TMC station is displayed on the TMC information
screen.
5. Select "TMC Manual Search" on the "TMC
information" screen to set the frequency by "<" or
">" switch.
6. Update the received TMC station by "Set" switch
and return to the "TMC information" screen. The
information of selected TMC station is displayed
on the TMC information screen.
VERSIONS LOG INFORMATION
Displays logs for drive and HDD.
Service Data Log
1. Select "Versions Log Information" on "Service"
screen.
2. Select "Service Data Log" on the "Versions Log
Information" screen.
Service
TMC Sensitivity
Versions Log Information
Touch Switch Confirmation
2/2
Back
Next
Previous
AC903642
AB
AC611547
AC
AC611548
AB
AC611549
AB
Service
TMC Sensitivity
Versions Log Information
Touch Switch Confirmation
2/2
Back
Next
Previous
AC903642
AB
AC611719
Service Data Log
Time Adjustment Log
AC
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст