Mitsubishi Lancer (4A9 engine). Manual — part 231
ETACS
CHASSIS ELECTRICAL
54A-586
Welcome light
Disabling or
enabling welcome
light function
Disabled
No function <Initial condition (vehicles for
RUSSIA)>
Small
The tail lamp illuminates. <Initial condition
(except vehicles for RUSSIA)>
Head
The headlamps illuminate.
Auto door
unlock
Adjustment of the
auto door unlock
function
Disabled
Without function <M/T, A/T, CVT> (initial
condition)
Always (P pos)
With function: Operates when the shift
lever or the selector lever is moved to the
P position. <A/T, CVT>
Always(Lock pos)
With function: Operates when the ignition
switch is moved to the LOCK (OFF)
position. <M/T, A/T, CVT>
Timer lock timer Timer lock period
adjustment
30 sec
30 seconds (initial condition)
60 sec
60 seconds
120 sec
120 seconds
180 sec
180 seconds
Door unlock
mode
Adjustment of
power door locks
with selective
unlocking <Vehicles
without dead lock
system>
All Doors Unlock
Without function: The first operation of
keyless entry system or unlock operation
by KOS unlocks all doors (initial condition).
Dr Door Unlock
With function: The first operation of
keyless entry system or unlock operation
by KOS unlocks the driver's door only, and
the second unlock operation within 2
seconds after that unlocks all doors.
Deadlock
Button
Operation
Adjustment of the
dead lock system
setting procedure
<vehicles with dead
lock system>
Twice
Operate the lock switch of the keyless
entry system or KOS twice.(initial
condition)
Once
Operate the lock switch of the keyless
entry system or KOS once.
Multi mode
Multi-mode keyless
entry function
customisation
<Vehicles with
electric retractable
remote controlled
door mirrors>
Disable
No function
D/M: O&C
Door mirror fold/unfold operation only
(initial condition)
KOS key detect
out from window
With/without KOS
key exterior
detection function
<Vehicles with
KOS>
Disable
No function (initial condition)
Enable
With function
Adjustment
item (M.U.T.-III
display)
Adjustment item
Adjusting content
(M.U.T.-III display)
Adjusting content
ETACS
CHASSIS ELECTRICAL
54A-587
KOS feature
KOS function
adjustment
<Vehicles with
KOS>
Both enable
All KOS functions are enabled (initial
condition).
Door Entry enable
Only door entry function is enabled.
ENG strt enable
Only engine starting function is enabled.
Both disabled
All KOS functions are disabled.
Sensitivity for
security sensor
Sensitivity level
setting of security
alarm sensor
<Vehicles with
security alarm>
Level 1
100% sensitivity of security alarm sensor
(initial condition)
Level 2
90% sensitivity of security alarm sensor
Level 3
80% sensitivity of security alarm sensor
Level 4
70% sensitivity of security alarm sensor
Alarm
Enables/disables
security alarm
<Vehicles with
security alarm>
Disable
Without function
Enable
With function (Initial condition)
Adjustment
item (M.U.T.-III
display)
Adjustment item
Adjusting content
(M.U.T.-III display)
Adjusting content
ETACS
CHASSIS ELECTRICAL
54A-588
ETACS-ECU
REMOVAL AND INSTALLATION
M1545004700289
CAUTION
When the ETACS-ECU is replaced, chassis number writing and coding must be performed. When
diagnosis code No.B1761 "Chassis No. not programmed" or No.B222C "Coding not completed" is set
to the ETACS-ECU, perform chassis number writing and coding. Refer to the "M.U.T.-III operation
manual" and perform coding.
Pre-removal and Post-installation Operation
² Instrument panel lower (Refer to GROUP 52A
− Instru-
ment Lower Panel .) <LHD>
² Glove box (Refer to GROUP 52A
− Glove box .) <RHD>
AC506912
1
AB
4.0 ± 2.0 N·m
Removal Steps
>>
A
<<
1.
ETACS-ECU
ETACS
CHASSIS ELECTRICAL
54A-589
INSTALLATION SERVICE POINT
>>A<< ETACS-ECU
The connectors and relays connected to the ETACS-
ECU are shown in the figure.
AC506599
UPPER VIEW
C-304
C-314
C-302
C-315
C-313
C-311
C-312
C-310
C-316
C-307
C-317
C-303
C-301
C-309
To instrument panel
wiring harness
To front wiring harness
FRONT VIEW
Blower relay
Fusible link
No connection <LHD>
or dead lock relay <RHD>
Fuse
No connection
Fusible link
To instrument panel
wiring harness
To roof wiring
harness
To instrument
panel wiring
harness
To floor wiring
harness
To floor wiring
harness
LOWER VIEW
To front wiring
harness
AI
1
7 8 9 10
20
4
2 3
5
6
11 12
13
14 15
16
17 18
19
To front wiring
harness
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст