Mitsubishi Lancer Evolution 7. Manual — part 38
EQUIPMENT –
Immobilizer System
7-5
DISPOSITION WHEN REPLACING IMMOBILIZER SYSTEM RELATED PARTS
To replace immobilizer related parts, observe the table below. When the ignition key is re-registered with
the MUT-II, the originally registered ignition key registration information will be lost.
Engine-ECU
Immobilizer-ECU
Ignition key
When replacing engine-ECU –
Replacement required
Replacement and re-registration
are required.
When rewriting engine-ECU –
Replacement not required
Replacement not required, re-
registration not required
ECU
Replacement not re-
quired
–
Replacement not required, regis-
tration are required
When adding ignition key
newly
Replacement not re-
quired
Replacement not required
Register an additional ignition key
and re-register all other ignition keys.
When ignition key is lost
Replacement not re-
quired
Replacement not required
re-register all other ignition keys
except the lost one.
Power
Encrypted code
Transponder
Ignition key
Steering lock key cylinder and
immobilizer-ECU
MUT-II
Engine-ECU
Start of permis-
sion signal
Registration
of ignition key
Integrated immobilizer-ECU and antenna
EQUIPMENT –
Lighting
7-6
LIGHTING
EXTERIOR LAMPS
D
The large lens adjusted to the exclusive body has been equipped with model specific 4 bulb type
headlamp incorporating front turn signal lamp, position lamp. The low beam is a projector type used
as a compact but efficient wide light distributor.
D
The front turn signal lamp adopts an aluminum metal evaporated reflector to improve visibility.
D
The tail lamp and stop lamp make use of complementary colors to emit white color from the red lens
to improve visibility.
D
The inner lens of the tail lamp has been set with a reflex reflector to improve appearance.
D
Rear fog lamps with outstanding visibility have been installed.
D
A high mount stop lamp has been installed to the rear shelf.
D
The lighting system is provided with headlamp auto-cut.
SPECIFICATIONS
Item
Specifications
Item
Specifications
Headlamp assembly
High beam (Halogen bulb) W
60 (HB3)
p
y
Low beam (Halogen bulb) W
51 (HB4)
Headlamp assembly
Position lamp W
5
p
y
Front turn signal lamp W
21
Side turn signal lamp W
5
Rear combination lamp
Tail/stop lamp W
5/21
p
Turn signal lamp W
21
Backup lamp W
21
Rear fog lamp W
21
High mount stop lamp W
21
License plate lamp W × number
5 × 2
NOTE
The brackets ( ) show the bulb type.
EQUIPMENT –
Lighting
7-7
CONSTRUCTION DIAGRAM
Side turn signal lamp
Headlamp
assembly
Rear combination
lamp
Tail lamp
Tail / stop lamp
Rear turn signal lamp
Back
-
up lamp or
rear fog lamp ∗
High mount stop lamp
NOTE
*: The driver’s side is installed with a rear fog lamp, while the passenger’s side is installed with a back-up
lamp.
Headlamp (High beam)
Headlamp (Low beam)
Position lamp
Front turn signal lamp
EQUIPMENT –
Lighting
7-8
INTERIOR LAMPS
D
A map lamp serving also as front room lamp which can be used at both the driver’s seat and passenger
sea is provided.
D
A rear room lamp to light the backseat and trunk lamp to light the trunk are provided.
SPECIFICATIONS
Item
Specifications
Map lamp W × quantity
7.5 × 2
Front room lamp W
7.5
Rear room lamp W
8
Trunk lamp W
5
CONSTRUCTION DIAGRAM
Rear room lamp
Map lamp and front room lamp
Trunk lamp
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст