Mitsubishi Evolution X. Manual — part 644
GENERAL INFORMATION
TSB Revision
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
52B-23
SEAT BELT
SWITCH
PASSENGER'S
SIDE
CENTER
PANEL
UNIT
ETACS-ECU
(FUSE )
12
INTERFACE
CIRCUIT
SRS-ECU
AIR BAG OFF
INDICATOR
LIGHT
PASSENGER'S
SIDE
HALL IC
SEAT BELT WARNING
TOME ALARM
GENERAL INFORMATION
TSB Revision
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
52B-24
COMPONENT LOCATION
NOTE: The illustration above shows the front impact sensor (LH) and the side impact sensor (LH). The posi-
tion of the front impact sensor (RH) and the side impact sensor (RH) is symmetrical to this.
AC605324
AC605641
AC605684
AC708928
AC608583
AB
Driver's air bag module
Clock spring
Passenger's (front) air bag module
Data link connector
SRS-ECU
Side impact sensor
Front impact sensor
Side-airbag module
Seat belt
pre-tensioner
Occupant
classification-
ECU
Seat slide
sensor
Weight
sensor
Knee air bag module
Weight
sensor
SERVICE PRECAUTIONS
TSB Revision
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
52B-25
SERVICE PRECAUTIONS
M1524000301339
DANGER
•
In order to avoid injury to yourself or others from
accidental deployment of the air bag during servic-
ing, read and carefully follow all the precautions
and procedures described in this manual.
•
After disconnecting the battery cable, wait 60 sec-
onds or more before proceeding with the following
work. The SRS system is designed to retain
enough voltage to deploy the air bag for a short
time even after the battery has been disconnected,
so serious injury may result from unintended air
bag deployment if work is done on the SRS system
immediately after the battery cables are discon-
nected.
WARNING
•
Battery posts, terminals and related accessories
contain lead and lead compounds. WASH HANDS
AFTER HANDLING.
•
Do not use any electrical test equipment on or near
the SRS components, except those specified on
•
Never Attempt to Repair the Following Compo-
nents: SRS-ECU, Clock Spring, Air Bag Modules,
Front impact sensor, Side Impact Sensor, Seat Belt
with Pre-tensioner. If any of these components are
diagnosed as faulty, they should only be replaced,
in accordance with the INDIVIDUAL COMPONENT
SERVICE procedures in this manual, starting on
•
Do not attempt to repair the wiring harness con-
nectors of the SRS. If any of the connectors are
diagnosed as faulty, replace the wiring harness. If
the wires are diagnosed as faulty, replace or repair
the wiring harness according to the following
table.
.
ACX00583
Insulating tape
Battery cable
Battery
AF
AC506921
SRS-ECU connector
AC
SERVICE PRECAUTIONS
TSB Revision
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
52B-26
SRS-ECU terminal No.
Destination of harness
Corrective action
1, 2
Instrument panel wiring harness
→ Knee
air bag module
Correct or replace the instrument panel
wiring harness.
5, 6
Instrument panel wiring harness
→
Clock spring
→ Driver's air bag module
1st squib side
Correct or replace the instrument panel
wiring harness. Replace the clock
spring.
7, 8
Instrument panel wiring harness
→
Passenger's (front) air bag module 1st
squib side
Correct or replace the instrument panel
wiring harness.
9, 10
Instrument panel wiring harness
→
Clock spring
→ Driver's air bag module
2nd squib side
Correct or replace the instrument panel
wiring harness. Replace the clock
spring.
11, 12
Instrument panel wiring harness
→
Passenger’s (front) air bag module 2nd
squib side
Correct or replace the instrument panel
wiring harness.
15, 16
CAN line
Correct or replace CAN line.
17
Instrument panel wiring harness
→
Ground
Correct or replace the instrument panel
wiring harness.
18
Instrument panel wiring harness
→ Air
bag OFF indicator light
Correct or replace the instrument panel
wiring harness.
21, 22
Front wiring harness
→ Instrument panel
wiring harness
→ Front impact sensor
wiring harness
→ Front impact sensor
(LH)
Correct or replace each wiring harness.
23, 24
Front wiring harness
→ Instrument panel
wiring harness
→ Front impact sensor
wiring harness
→ Front impact sensor
(RH)
Correct or replace each wiring harness.
31, 32
Floor wiring harness
→ Side-air bag
module (LH)
Correct or replace the floor wiring
harness.
33, 34
Floor wiring harness
→ Side-air bag
module (RH)
Correct or replace the floor wiring
harness.
39, 40
Floor wiring harness
→ Rear floor wiring
harness (RH)
→ Curtain air bag module
(RH)
Correct or replace each wiring harness.
41, 42
Floor wiring harness
→ Rear floor wiring
harness (LH)
→ Curtain air bag module
(LH)
Correct or replace each wiring harness.
43, 44
Floor wiring harness
→ Seat belt
pre-tensioner (RH)
Correct or replace the floor wiring
harness.
45, 46
Floor wiring harness
→ Seat belt
pre-tensioner (LH)
Correct or replace the floor wiring
harness.
49, 50
Floor wiring harness
→ Side impact
sensor (LH)
Correct or replace the floor wiring
harness.
51, 52
Floor wiring harness
→ Side impact
sensor (RH)
Correct or replace the floor wiring
harness.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст