Mitsubishi Evolution X. Manual — part 1142
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-203
STEP 8. Check the wiring harness between joint connector
(CAN1) C-105 and A/C-ECU connector C-22 for a short to
ground. Measure the resistance at joint connector (CAN1)
C-105.
(1) Disconnect joint connector (CAN1), and measure the
resistance at the wiring harness side of joint connector
(CAN1).
(2) Measure the resistance between joint connector (CAN1)
terminal 1 and body ground.
OK: 1 kilo ohm or more
(3) Measure the resistance between joint connector (CAN1)
terminal 12 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES (vehicles without MMCS) : Go to Step 9.
YES (vehicles with MMCS) : Go to Step 10.
NO : Go to Step 54.
STEP 9. Check the wiring harness between joint connector
(CAN1) C-105 and radio and CD player or CD changer
connector C-107 for a short to ground. Measure the
resistance at joint connector (CAN1) C-105.
(1) Disconnect joint connector (CAN1), and measure the
resistance at the wiring harness side of joint connector
(CAN1).
(2) Measure the resistance between joint connector (CAN1)
terminal 5 and body ground.
OK: 1 kilo ohm or more
AC608179
TEST
HARNESS
Harness side: C-105
CK
AC608179
Harness side: C-105
CL
TEST
HARNESS
AC608179
TEST
HARNESS
Harness side: C-105
CM
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-204
(3) Measure the resistance between joint connector (CAN1)
terminal 16 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES (vehicles without satellite radio) : Go to Step 12.
YES (vehicles with satellite radio) : Go to Step 11.
NO : Go to Step 55.
STEP 10. Check the wiring harness between joint
connector (CAN1) C-105 and CAN box unit connector C-15
for a short to ground. Measure the resistance at joint
connector (CAN1) C-105.
(1) Disconnect joint connector (CAN1), and measure the
resistance at the wiring harness side of joint connector
(CAN1).
(2) Measure the resistance between joint connector (CAN1)
terminal 5 and body ground.
OK: 1 kilo ohm or more
(3) Measure the resistance between joint connector (CAN1)
terminal 16 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES (vehicles without satellite radio) : Go to Step 12.
YES (vehicles with satellite radio) : Go to Step 11.
NO : Go to Step 56.
AC608179
Harness side: C-105
CN
TEST
HARNESS
AC608179
TEST
HARNESS
Harness side: C-105
CM
AC608179
Harness side: C-105
CN
TEST
HARNESS
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-205
STEP 11. Check the wiring harness between joint
connector (CAN1) C-105 and satellite radio tuner
connector C-18 for a short to ground. Measure the
resistance at joint connector (CAN1) C-105.
(1) Disconnect joint connector (CAN1), and measure the
resistance at the wiring harness side of joint connector
(CAN1).
(2) Measure the resistance between joint connector (CAN1)
terminal 2 and body ground.
OK: 1 kilo ohm or more
(3) Measure the resistance between joint connector (CAN1)
terminal 13 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES : Go to Step 12.
NO : Go to Step 57.
STEP 12. Check the wiring harness between joint
connector (CAN1) C-105 and ETACS-ECU connector C-301
for a short to ground. Measure the resistance at joint
connector (CAN1) C-105.
(1) Disconnect joint connector (CAN1) and ETACS-ECU
connector C-301, and measure the resistance at the wiring
harness side of joint connector (CAN1).
(2) Measure the resistance between joint connector (CAN1)
terminal 6 and body ground.
OK: 1 kilo ohm or more
AC608179
TEST
HARNESS
Harness side: C-105
CO
AC608179
Harness side: C-105
CP
TEST
HARNESS
AC608179
TEST
HARNESS
Harness side: C-105
CQ
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-206
(3) Measure the resistance between joint connector (CAN1)
terminal 19 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES : Go to Step 58.
NO : Repair the wiring harness between joint connector
(CAN1) C-105 and ETACS-ECU connector C-301.
STEP 13. Check the wiring harness between ETACS-ECU
connector C-301 and body ground for a short to power
supply. Measure the voltage at ETACS-ECU connector
C-301.
(1) Disconnect ETACS-ECU connector C-301, and measure
the voltage at the wiring harness side of ETACS-ECU
connector.
(2) Turn the ignition switch to the ON position.
(3) Measure the voltage between ETACS-ECU connector
terminal 6 and body ground.
OK: 4.7 volts or less
(4) Measure the voltage between ETACS-ECU connector
terminal 7 and body ground.
OK: 4.7 volts or less
Q: Do all the voltages measure 4.7 volts or less?
YES : Go to Step 25.
NO : Go to Step 14.
AC608179
Harness side: C-105
CR
TEST
HARNESS
AC608178
TEST
HARNESS
Harness side: C-301
AL
AC608178
TEST
HARNESS
Harness side: C-301
AM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст