Mitsubishi Evolution X. Manual — part 466
DIAGNOSIS <SHIFT LEVER>
TSB Revision
TWIN CLUTCH- SPORTRONIC SHIFT TRANSMISSION (TC-SST)
22C-321
STEP 4. Check the wiring harness between C-27 shift
lever-ECU connector terminal No. 8 and body ground.
Check the ground line for open circuit.
Q: Is the check result normal?
YES : Go to Step 5.
NO : Repair the wiring harness.
STEP 5. Measure the voltage at C-27 shift lever-ECU
connector.
Disconnect the connector, and measure the voltage between
terminal No. 12 and ground at the wiring harness side.
OK: Battery positive voltage
Q: Is the check result normal?
YES : Go to Step 8.
NO : Go to Step 6.
STEP 6. Shift lever-ECU connector check: C-27
Check for the contact with terminals.
Q: Is the check result normal?
YES : Go to Step 7.
NO : Repair the defective connector.
STEP 7. Check the wiring harness between C-27 shift
lever-ECU connector terminal No. 12 and fusible link No.
36.
Check the power supply line for short or open circuit.
Q: Is the check result normal?
YES : Go to Step 8.
NO : Repair the wiring harness.
STEP 8. Scan tool diagnostic trouble code
Check the ETACS diagnostic trouble code. (Refer to GROUP
54A
− Troubleshooting
.)
Q: Is the DTC set?
YES : Perform the relevant troubleshooting.
NO : Go to Step 9.
STEP 9. Measure the voltage at C-27 shift lever-ECU
connector.
(1) Disconnect the connector, and measure the voltage
between terminal No. 13 and ground at the wiring harness
side.
(2) Turn the ignition switch to the "ON" position.
OK: Battery positive voltage
Q: Is the check result normal?
DIAGNOSIS <SHIFT LEVER>
TSB Revision
TWIN CLUTCH- SPORTRONIC SHIFT TRANSMISSION (TC-SST)
22C-322
STEP 10. Inspection of the shift lever-ECU connector,
intermediate connector, and ETACS-ECU connector: C-27,
C-131, C-317
Check for the contact with terminals.
Q: Is the check result normal?
YES : Go to Step 11.
NO : Repair the defective connector.
STEP 11. Check the wiring harness between C-27 shift
lever-ECU connector terminal No. 13 and C-317
ETACS-ECU connector terminal No. 5.
Check the power supply line for short or open circuit.
Q: Is the check result normal?
YES : Go to Step 12.
NO : Repair the wiring harness.
STEP 12. Retest the system.
Q: Does a malfunction take place again?
YES : Replace the shift lever assembly. (Refer to
.)
NO : Intermittent malfunction. (Refer to GROUP 00
− How
to Cope with Intermittent Malfunction
.)
DATA LIST REFERENCE TABLE
M1225006700022
Item
No.
Display on
scan tool
Item name
Check conditions
Normal
conditions
1
Lever
position
Shift lever
position
Ignition switch:
ON
Shift lever position: P
P
Shift lever position: P
⇔R
R-P
Shift lever position: R
R
Shift lever position: R
⇔N
N-R
Shift lever position: N
N
Shift lever position: N
⇔D
D-N
Shift lever position: D
D
Shift lever position: Manual
mode
Manual
Shift lever position: Upshift
and hold
+
Shift lever position:
Downshift and hold
−
3
Battery
voltage (CAN
data)
Battery voltage
(CAN data)
Ignition switch: ON
Battery voltage
(12 V)
4
Back light
voltage
Back-up light
voltage
Ignition switch:
ON
Shift lever position: R
20
− 120 digits
Shift lever position: Other
than above
10 digits or less
DIAGNOSIS <SHIFT LEVER>
TSB Revision
TWIN CLUTCH- SPORTRONIC SHIFT TRANSMISSION (TC-SST)
22C-323
5
Shift lock
voltage
Shift lock
voltage
Ignition switch:
ON
Shift lever position: P
500 digits or
more
Shift lever position: Other
than above
100 digits or
less
6
Battery
voltage
Battery positive
voltage
Ignition switch: ON
520
− 920 digits
7
Shift indicator
voltage(D
range)
Shift indicator
voltage (D
range)
Ignition switch:
ON
Shift lever position: D
10
− 370 digits
Shift lever position: Other
than above
10 digits or less
8
Shift indicator
voltage(M
mode)
Shift indicator
voltage (M
range)
Ignition switch:
ON
Shift lever position: Manual
mode
10
− 370 digits
Shift lever position: Other
than above
10 digits or less
9
Shift indicator
voltage(N
range)
Shift indicator
voltage (N
range)
Ignition switch:
ON
Shift lever position: N
10
− 370 digits
Shift lever position: Other
than above
10 digits or less
10
Shift indicator
voltage(P
range)
Shift indicator
voltage (P
range)
Ignition switch:
ON
Shift lever position: P
10
− 370 digits
Shift lever position: Other
than above
10 digits or less
11
Shift indicator
voltage(R
range)
Shift indicator
voltage (R
range)
Ignition switch:
ON
Shift lever position: R
10
− 370 digits
Shift lever position: Other
than above
10 digits or less
16
Shift indicator
PWM (Day)
Shift indicator
PWM value
(daytime)
Ignition switch: ON
100%
17
Shift indicator
PWM (Night)
Shift indicator
PWM value
(nighttime)
Ignition switch: ON
20%
20
ILL+
ILL+
Ignition switch:
ON
Headlight (small light): ON
Active
Headlight (small light): OFF In Active
23
Ignition SW
Ignition switch Ignition switch: ON
ON
Ignition switch: START
START
Item
No.
Display on
scan tool
Item name
Check conditions
Normal
conditions
DIAGNOSIS <SHIFT LEVER>
TSB Revision
TWIN CLUTCH- SPORTRONIC SHIFT TRANSMISSION (TC-SST)
22C-324
24
Shift position Shift position
• Shift lever position: Manual mode
• Driving at a constant speed in 1st
1st
• Shift lever position: Manual mode
• Driving at a constant speed in 2nd
2nd
• Shift lever position: Manual mode
• Driving at a constant speed in 3rd
3rd
• Shift lever position: Manual mode
• Driving at a constant speed in 4th
4th
• Shift lever position: Manual mode
• Driving at a constant speed in 5th
5th
• Shift lever position: Manual mode
• Driving at a constant speed in 6th
6th
Ignition switch:
ON
Shift lever position: D
D
Ignition switch:
ON
Shift lever position: N
N
Shift lever position: P
P
Shift lever position: R
R
• Shift lever position: D
• Driving at a constant speed in 1st
D1
• Shift lever position: D
• Driving at a constant speed in 2nd
D2
• Shift lever position: D
• Driving at a constant speed in 3rd
D3
• Shift lever position: D
• Driving at a constant speed in 4th
D4
• Shift lever position: D
• Driving at a constant speed in 5th
D5
• Shift lever position: D
• Driving at a constant speed in 6th
D6
25
Vehicle
speed
Vehicle speed
Driving at a constant speed of 20 km/h
20 km/h
26
Back light
current
Back light
current
• Ignition switch: ON
• Shift lever position: R
1 to 6 A
30
Drive mode
SW (output
data)
Drive mode
switch (output
data)
Ignition switch:
ON
Shift lever position: Upshift
and hold
+
Shift lever position:
Downshift and hold
−
Shift lever position: Other
than above
Inactive
Item
No.
Display on
scan tool
Item name
Check conditions
Normal
conditions
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст