Mitsubishi Evolution X. Manual — part 568
DIAGNOSIS
TSB Revision
KEYLESS OPERATION SYSTEM (KOS)
42B-179
STEP 9. Check the wiring harness between the receiver
antenna assembly connector D-14 (terminal Nos.1, 8, 12, 3,
5) and the ground for short circuit.
(1) Disconnect reciever anntena assembly connector D-14,
and check the wiring harness.
(2) Check the wiring harness between reciever anntena
assembly connector D-14 (terminal No.1) and ground
OK: No continuity
(3) Check the wiring harness between reciever anntena
assembly connector D-14 (terminal No.8) and and ground
OK: No continuity
(4) Check the wiring harness between reciever anntena
assembly connector D-14 (terminal No.12) and and ground
OK: No continuity
(5) Check the wiring harness between reciever anntena
assembly connector D-14 (terminal No.3) and ground
OK: No continuity
AC709707FZ
Harness side: D-14
AC709707FY
Harness side: D-14
AC709707FX
Harness side: D-14
AC709707FW
Harness side: D-14
DIAGNOSIS
TSB Revision
KEYLESS OPERATION SYSTEM (KOS)
42B-180
(6) Check the wiring harness between reciever anntena
assembly connector D-14 (terminal No.5) and ground
OK: No continuity
Q: Is the wiring harness between receiver antenna
assembly connector D-14 (terminal Nos.1, 8, 12, 3, 5)
and the ground in good condition?
YES : Go to Step 10.
NO (receiver antenna assembly connector D-14 terminal
No.1
− ground.) : Repair the wiring harness between
receiver antenna assembly connector D-14 (terminal
No.1) and the KOS-ECU connector C-05 (terminal
No.12).
NO (receiver antenna assembly connector D-14 terminal
No.8
− ground.) : Repair the wiring harness between
receiver antenna assembly connector D-14 (terminal
No.8) and the ground.
NO (receiver antenna assembly connector D-14 terminal
No.12
− ground.) : Repair the wiring harness between
receiver antenna assembly connector D-14 (terminal
No.12) and the ground.
NO (receiver antenna assembly connector D-14 terminal
No.3
− ground.) : Repair the wiring harness between
receiver antenna assembly connector D-14 (terminal
No.3) and the ground.
NO (receiver antenna assembly connector D-14 terminal
No.5
− ground.) : Repair the wiring harness between
receiver antenna assembly connector D-14 (terminal
No.5) and the ground.
STEP 10. Replace the receiver antenna assembly, and
retest the system.
Check that the keyless operation key can be registered.
Q: Is the keyless operation key that cannot be registered
using scan tool?
YES : Go to Step 11.
NO : The procedure is complete.
AC709707FV
Harness side: D-14
DIAGNOSIS
TSB Revision
KEYLESS OPERATION SYSTEM (KOS)
42B-181
STEP 11. Check the wiring harness between the receiver
antenna module connector C-08 (terminal Nos. 2, 1, 8, 12)
and the KOS-ECU connector C-05 (terminal Nos. 11, 12, 32,
7) for open circuit.
(1) Disconnect reciever anntena module connector C-08 and
KOS-ECU connector C-05, and check the wiring harness.
(2) Check the wiring harness between reciever anntena
module connector C-08 (terminal No.2) and KOS-ECU
connector C-05 (terminal No.11)
OK: Continuity exists (2
Ω or less)
(3) Check the wiring harness between reciever anntena
module connector C-08 (terminal No.1) and KOS-ECU
connector C-05 (terminal No.12)
OK: Continuity exists (2
Ω or less)
(4) Check the wiring harness between reciever anntena
module connector C-08 (terminal No.8) and KOS-ECU
connector C-05 (terminal No.32)
OK: Continuity exists (2
Ω or less)
AC709707
Harness side: C-05
DZ
Harness side: C-08
AC709707
Harness side: C-05
DZ
Harness side: C-08
AC709707
Harness side: C-05
EB
Harness side: C-08
DIAGNOSIS
TSB Revision
KEYLESS OPERATION SYSTEM (KOS)
42B-182
(5) Check the wiring harness between reciever anntena
module connector C-08 (terminal No.12) and KOS-ECU
connector C-05 (terminal No.7)
OK: Continuity exists (2
Ω or less)
Q: Is the wiring harness between receiver antenna module
connector C-08 (terminal Nos. 2, 1, 8, 12) and the
KOS-ECU connector C-05 (terminal Nos. 11, 12, 32, 7) in
good condition?
YES : Go to Step 12.
NO (receiver antenna module connector C-08 terminal
No.2
− KOS-ECU connector C-05 terminal No.11.) :
Repair the wiring harness between receiver antenna
module connector C-08 (terminal No. 2) and the
KOS-ECU connector C-05 (terminal No. 11).
NO (receiver antenna module connector C-08 terminal
No.1
− KOS-ECU connector C-05 terminal No.12.) :
Repair the wiring harness between receiver antenna
module connector C-08 (terminal No. 1) and the
KOS-ECU connector C-05 (terminal No. 12).
NO (receiver antenna module connector C-08 terminal
No.8
− KOS-ECU connector C-05 terminal No.32.) :
Repair the wiring harness between receiver antenna
module connector C-08 (terminal No. 8) and the
KOS-ECU connector C-05 (terminal No. 32).
NO (receiver antenna module connector C-08 terminal
No.12
− KOS-ECU connector C-05 terminal No.7.) :
Repair the wiring harness between receiver antenna
module connector C-08 (terminal No. 12) and the
KOS-ECU connector C-05 (terminal No. 7).
AC709707EC
Harness side: C-08
Harness side: C-05
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст