Mitsubishi Evolution X. Manual — part 117
13B-1
GROUP 13B
FUEL SUPPLY
CONTENTS
GENERAL INFORMATION . . . . . . . .
FUEL TANK . . . . . . . . . . . . . . . . . . . .
GENERAL INFORMATION
TSB Revision
FUEL SUPPLY
13B-2
GENERAL INFORMATION
M2134000101074
.
The fuel system consists of the following compo-
nents:
• Fuel rail
• MFI fuel rail pressure regulator
• Fuel injector
• Fuel tank assembly
• Fuel pump module
• Fuel level sensor (sub)
• Evaporative emission canister
SPECIFICATIONS
CONSTRUCTION DIAGRAM
This fuel system is designed with consideration for
global environment protection to ensure safety at a
collision, reduce weight, and improve reliability and
quality. The system has the following features.
• A quick-joint connector of a plastic tube is used
for the fuel high-pressure hoses in the engine
compartment to reduce the permeation of fuel
evaporative emission.
• The surface of underfloor fuel pipes is coated
with 1-mm thickness of plastic to improve resis-
tance to corrosion and chipping.
• The rubber boot is employed for the filler port
mounting part of fuel filler neck to protect fuel filler
neck in case of collision.
Item
Specification
Fuel tank capacity dm
3
(gal)
55 (14.5)
Fuel pump type
Electric
Fuel filter type
Cartridge (incorporates fuel pump module)
Fuel pump pressure regulator pressure kPa (psi)
329 (47.7)
Fuel injector
Type
Elector-magnetic
Quantity
4
Evaporative emission control system
Canister
AC709107
Fuel rail
Fuel injector
return pipe
Fuel pipe
Fuel pump module
Evaporative
emission
canister
Fuel tank
AB
Fuel level sensor (sub)
Fuel high-pressure hose
MFI fuel rail
pressure regulator
Filler neck boots
Fuel injector
FUEL TANK
TSB Revision
FUEL SUPPLY
13B-3
FUEL TANK
M2134001001070
.
The fuel tank assembly consists of the fuel pump
module, fuel level sensor, fuel tank, and others, and
offers the following features.
• The fuel tank is placed under the rear seat floor to
improve the safety upon impact.
• For the fuel tank, pre-coat alloy molten zinc steel
plate is adopted to the tank main body, which
does not contain tin alloy.
• The fuel tank safety valve is integrated in the fuel
tank which prevents fuel leaks when the vehicle
has leaned or rolled over, and a number of open-
ings and pipe joints on the fuel tank upper surface
has been reduced.
• A built-in fuel filter and fuel tank suction hose
have been adopted to offer support to the sad-
dle-type fuel tank.
The fuel pump module consists of the following com-
ponents:
• Fuel pump assembly
• Fuel gauge unit
• Fuel filter
• Fuel tank differential pressure sensor
FUEL TANK
TSB Revision
FUEL SUPPLY
13B-4
CONSTRUCTION DIAGRAM
AC709133
Fuel level sensor (sub)
Fuel pump module
Fuel tank suction hose
Fuel tank
AB
AC709134
Fuel tank suction hose
Leveling valve
In tank suction filter
AB
Fuel tank safety valve
Fuel tank safety valve
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст