Mitsubishi Evolution X. Manual — part 161

35-1

GROUP 35

SERVICE BRAKE

CONTENTS

BASIC BRAKE SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

35A

FOUR-WHEEL ANTI-LOCK BRAKE SYSTEM (4ABS) . . . . . . .

35B

ACTIVE SKID CONTROL SYSTEM (ASC). . . . . . . . . . . . . . . . .

35C

NOTES

21A-1

GROUP 21A

CLUTCH

CONTENTS

GENERAL INFORMATION . . . . . . . .

21A-2

SERVICE SPECIFICATION(S) . . . . .

21A-2

LUBRICANT(S) . . . . . . . . . . . . . . . . .

21A-2

ON-VEHICLE SERVICE. . . . . . . . . . .

21A-2

CLUTCH PEDAL CHECK . . . . . . . . . . . . . .

21A-2

CLUTCH BLEEDING . . . . . . . . . . . . . . . . .

21A-3

CLUTCH PEDAL AND MASTER

CYLINDER . . . . . . . . . . . . . . . . . . . . .

21A-4

REMOVAL AND INSTALLATION . . . . . . . .

21A-4

INSPECTION. . . . . . . . . . . . . . . . . . . . . . . .

21A-7

CLUTCH SWITCH CHECK AND

ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . .

21A-7

INTERLOCK SWITCH OPERATING

CHECK . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21A-7

CLUTCH CONTROL . . . . . . . . . . . . . .

21A-8

REMOVAL AND INSTALLATION . . . . . . . .

21A-8

INSPECTION. . . . . . . . . . . . . . . . . . . . . . . .

21A-10

GENERAL INFORMATION

TSB Revision

CLUTCH

21A-2

GENERAL INFORMATION

M1211000100461

The clutch is a dry single-disk, diaphragm type;
hydraulic pressure is used for the clutch control. The
clutch shares a brake fluid reservoir with the brake
system.

SERVICE SPECIFICATION(S)

M1211000300692

Item

Standard value

Clutch pedal lateral play mm (in)

4 (0.16) or less

Clutch pedal free play mm (in)

4

− 9 (0.16 − 0.35)

Clutch pedal height mm (in)

110

− 116 (4.33 − 4.57)

Distance between the clutch pedal and the pedal stopper when the clutch
pedal is released mm (in)

13.5 (0.53) or more

LUBRICANT(S)

M1211000400440

Item

Specified lubricant

Quantity

Clutch fluid

DOT 3 or DOT 4

As required

Release cylinder push rod

MITSUBISHI Part No.0101011 or equivalent

ON-VEHICLE SERVICE

CLUTCH PEDAL CHECK

M1211000900746

NOTE: This clutch pedal assembly is unadjustable because of
its structure.

AC709626 AB

A

1. Measure the clutch pedal looseness (A).

Standard value (A): 4 mm (0.16 inch) or less

2. If the clutch pedal looseness is not within the standard

value, the clutch pedal assembly may have an abnormality.
In this case, check the clutch pedal assembly, and replace if
necessary.