Mitsubishi Evolution X. Manual — part 135
SEAT
TSB Revision
INTERIOR
52A-5
• Heated seats are adopted to the driver's and front
passenger's seats.<Vehicles with heated seat>
• Genuine leather and artificial leather seats are
provided. With the genuine leather and artificial
leather seat, the genuine leather is used to the
side section and the artificial leather is used to
the main section to enhance the texture, and the
double stitching is added to improve luxurious
feel. A separate material is added to the shoulder
and thigh sections to receive the lateral G during
cornering, ensuring the support function and
improving the functionality.<MR>
• Pads of seating surface, side section, and upper
back are separated to support the body with the
whole seatback, securing an excellent support
performance and further enhancing the balance
with usefulness.
SPECIFICATIONS FOR HEATED SEAT
REAR SEAT
M2520007000746
A low-back bench seat is used for rear seat. The rear
seat offer the following advantages:
• Soft leather and artificial leather are adopted for
enhanced luxurious feel.<MR>
• The center armrest has a cup holder.
• An upper tether anchor has been installed on the
rear shelf trim, and an ISO-FIX lower anchor has
been installed on the body side.
Item
Specification
ENERGY CONSUMPTION W
HIGH
61
± 6.1
LOW
16
± 1.6
THERMOSTAT
°C
ON
→ OFF
40
± 4
OFF
→ ON
30
± 5
AC708455
Cup holder
Head restraint
vertical adjustrment
AB
<Lower anchorage for child seat>
<Uper tether anchor>
SEAT BELT
TSB Revision
INTERIOR
52A-6
SEAT BELT
M2520010000898
FRONT SEAT BELT
• An ELR 3-point seat belt (driver's side) and
3-point seat belt with ELR/ALR changeover
mechanism (passenger's side) is used.
• One-touch push button style adjustable seat belt
anchor and retractable buckle provide the most
suitable belt fitting.
• The seat belt retractor with the force limiter for
the driver’s seat and the front passenger’s seat
increase safety.
• A seat belt warning light is installed to the driver’s
and passenger’s seat.
REAR SEAT BELT
• 3-point seat belt with ALR/ELR changeover
mechanism (LH/RH/Center) is used for the rear
seat.
AC708461
Seat belt warning lamp
Seat belt warning lamp
<USA>
<CANADA>
ELR 3-point seat belt
One-touch push button style
adjustable seat belt
shoulder anchor
ELR/ALR 3-point seat belt
Seat belt retractor
with a pre-tensioner
and force limiter
ELR/ALR 3-point seat belt
Seat belt
retractor
AB
ELR/ALR 3-point seat belt
ELR/ALR 3-point seat belt
SEAT BELT
TSB Revision
INTERIOR
52A-7
SEAT BELT RETRACTOR WITH FORCE LIMITER
.
The driver’s/front passenger’s seat belt retractor has been
equipped with a force limiter. The force limiter is a device which
operates when a predetermined force is applied, and limits the
force.
.
OPERATION
1. If a collision energy is transmitted to the seat belt, the ELR
mechanism will operate to lock the seat belt.
2. If the energy increases to a predetermined value, the torsion
bar will be distorted. As the spindle rotates together with the
torsion bar, the seat belt webbing is pulled out, reducing the
impact to the occupants.
AC100083
TORSION BAR
SPINDLE
BELT
AB
TRIMS
TSB Revision
INTERIOR
52A-8
TRIMS
INTERIOR TRIMS
M2520012000720
• The interiors are fully covered by trims.
• The energy absorption rib molding located in the
back side of the front pillar trim and the rear pillar
trim protect head from side impacts and the resin
materials for the trims are unbreakable materials.
• Use of nonflammable materials for the trims has
increased safety as outstanding interiors. Also,
material codes are indicated to deal with recy-
cling easily.
AC708640
Energy absorption rib
Front piller trim
(back side)
Front pillar trim
Cowl side trim
Center pillar trim upper
Rear piller trim
Front scuff plate
Center piller trim lower
Rear scuff plate
Trunk side trim
Rear end trim
Rear shelf trim
AB
Trunk lid trim
Trunk room trim front
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст