Mitsubishi Evolution X. Manual — part 48
ENGINE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-2
ENGINE CONTROL
GENERAL INFORMATION
M2170001000905
For the accelerator system, an electronic throttle
valve control system has been adopted, disposing of
an accelerator cable. This system detects the accel-
erator pedal travel by using a accelerator pedal posi-
tion sensor (APS) in the accelerator pedal assembly
for electronic control of the throttle valve angle.
To the arm of accelerator pedal assembly, a resin
arm is employed in order to reduce weight.
Also, the aluminum pedal pad has been adopted to
enhance the sporty image.
CONSTRUCTION DIAGRAM
AC613376AB
Accelerator pedal assembly
[Built-in accelerator pedal position
sensor (APS)]
Resin arm
Aluminum pedal pad
AUTO-CRUISE CONTROL SYSTEM
TSB Revision
ENGINE AND EMISSION CONTROL
17-3
AUTO-CRUISE CONTROL SYSTEM
GENERAL INFORMATION
M2170001000897
By using the cruise control system, the driver can
drive at preferred speeds in a range of approximately
40 to 200 km/h (25 to 125 mph) without depressing
the accelerator pedal.
For this cruise control system, in conjunction with the
electronic throttle valve control system, the engine
control module (ECM) electronically controls the
throttle valve.
CONSTRUCTION DIAGRAM
AC708691
AC708693
AC708696
AC708692
CANCEL
ACC
RES
ON
OFF
COAST
SET
AC708694
AC708695
Cruise control switch
Data link connector
Hood
lock
release
handle
AB
Clutch switch <M/T>
Stoplight switch
Accelerator pedal
[Built-in accelerator
pedal position sensor
(APP sensor)]
Engine control
module (ECM)
"CRUISE" indicator light
Transaxle assembly
[Built-in twin clutch
-sportronic shift
transmission-ECU
(TC-SST-ECU)]
<TC-SST>
Throttle body
[Built-in throttle position sensor
(TP sensor) and
throttle actuator control motor
(TAC motor)]
Hydraulic unit Assembly
(Built-in ASC-ECU)
Shift lever assembly
(Built-in shift lever ECU)
<TC-SST>
Steering wheel
AUTO-CRUISE CONTROL SYSTEM
TSB Revision
ENGINE AND EMISSION CONTROL
17-4
COMPONENTS AND FUNCTIONS
Component
Function
Accelerator pedal position sensor (APP sensor)
Informs the ECM of the accelerator pedal
depression.
ASC-ECU
• Outputs the cruise control cancel signal to ECM.
• The vehicle speed signal is sent to the ECM.
Clutch switch <M/T>
Because the constant speed driving is cancelled by
the clutch operation, the clutch pedal status is
detected.
"CRUISE" indicator light
• The light is included in the combination meter and
illuminates when the "ON/OFF" switch is pressed
(cruise control system: ON).
• Depending on the flashing status of indicator light,
it displays the diagnostic trouble code signal of
cruise control system.
Cruise control switch
"ON/OFF" switch
Power switch for cruise control system.
"ACC/RES" switch
Vehicle speed is set with the "ACC/RES" switch and
"COAST/SET" switch.
"COAST/SET" switch
"CANCEL" switch
Cancels the cruise speed setting.
Data link connector
If the scan tool is connected, the input check code
from the ECM can be read.
Engine control module (ECM)
• Based on the input signal from each sensor and
switch, it outputs the target throttle valve opening
angle signal to the TAC motor.
• Based on the input signal from each sensor and
switch, it outputs the shift control signal to the
TC-SST-ECU <TC-SST>.
• Based on the vehicle speed signal from the
ASC-ECU, it calculates the vehicle speed.
• Based on the shift lever "N" position signal of the
shift lever ECU from the TC-SST-ECU, it cancels
constant speed driving <TC-SST>.
• Outputs the ON/OFF signals of "CRUISE"
indicator light and cruise control system.
• The diagnostic trouble code signal is sent to the
"CRUISE" indicator light.
• The input check code is sent to the data link
connector.
Shift lever ECU <TC-SST>
Because the constant speed driving is cancelled by
the shift lever operation, it detects the "N" position.
Stoplight switch
• Because the constant speed driving is canceled
by the brake operation, it detects the brake pedal
status.
• As for the stoplight switch, two built-in switches,
the stoplight switch which is also used for the
stoplight illumination and the brake switch which
is used exclusively for the cruise control, are
integrated, and thus the reliability is enhanced.
AUTO-CRUISE CONTROL SYSTEM
TSB Revision
ENGINE AND EMISSION CONTROL
17-5
CONSTRUCTION AND OPERATION
M2170002000403
SYSTEM OUTLINE
The cruise control section in ECM calculates the
cruise control system operation status based on the
signals sent from switches and sensors.Based on
the calculation, the cruise control section outputs the
target accelerator pedal opening angle signal to the
engine control section, and shift control signal to
TC-SST-ECU <TC-SST>, and "CRUISE" indicator
light ON/OFF signal to the combination meter.
In the engine control section, the target accelerator
pedal opening angle value is calculated based on the
target accelerator pedal opening angle signal from
the cruise control section, actual accelerator pedal
opening angle signal from the APP sensor, and the
throttle valve opening angle signal from the TP sen-
sor, and the vehicle speed is controlled by the driving
of TAC motor.
BLOCK DIAGRAM
Throttle actuator control motor (TAC motor)
The throttle valve opens and closes in response to
the target throttle valve opening angle signal from
the ECM.
Throttle position sensor (TP sensor)
Informs the ECM of the throttle valve opening angle.
Twin clutch-sportronic shift transmission-ECU
(TC-SST-ECU)
• Based on the transaxle control signal from the
ECM, it controls the transaxle.
• Transmits the shift lever "N" position signal from
the shift lever ECU sent to the ECM.
• TC-SST drive mode signal from the shift lever
ECU sent to the ECM.
Component
Function
AC708697
TAC motor
Target accelerator pedal
opening angle signal
Engine control section
Cruise control section
"CRUISE" indicator light
Actual
accelerator
pedal opening
angle signal
Target
throttle
valve
opening
angle
signal
Cruise control switch
ECM
"CRUISE"
indicator
light
ON/OFF
signal
APP sensor
Shift
lever
position
signal
Shift
control
signal
Cruise
control
switch
ON/OFF
signal
Shift lever-ECU <TC-SST>
Shift
lever
position
signal
TC-SST-ECU <TC-SST>
Vehicle
speed
signal
Cruise
control
cancel
signal
ASC-ECU
TP sensor
Throttle
valve
opening
angle
signal
Stoplight
switch
signal
Brake
switch
signal
Clutch
switch
signal
Stoplight switch
Clutch switch <M/T>
TC-SST
drive
mode
signal
TC-SST
drive
mode
signal
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст