Mitsubishi Evolution X. Manual — part 730
SRS AIR BAG DIAGNOSIS
TSB Revision
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
52B-367
STEP 3. Recheck of the SRS warning light
(1) Connect the negative battery terminal.
(2) Ignition switch: ON
Q: Does the light stay ON?
YES : Replace SRS-ECU (Refer to
NO : There is an intermittent malfunction such as poor
engaged connector(s) or open circuit (Refer to
GROUP 00, How to Cope with Intermittent
Malfunction
).
DATA LIST REFERENCE TABLE
M1524003500351
DATA LIST OUTPUT
.
The following items can be read by the scan tool from the SRS-ECU input data.
.
Item No.
Display on M.U.T.-III
Check conditions
Normal conditions
01
SRS warning light "ON"
request
• Ignition switch: ON
• After warning lamp pre-check
OFF
• Ignition switch: ON
• During warning lamp pre-check
ON
02
Pass. SRS light "ON"
request
• Ignition switch: ON
• After warning light pre-check
OFF
• Ignition switch: ON
• During warning light pre-check
ON
04
Passenger’s seatbelt
switch
• Ignition switch: ON
• After warning light pre-check
• Wear the passenger seatbelt.
Fastened
• Ignition switch: ON
• After warning light pre-check
• Undo the passenger seatbelt.
Unfastened
05
Passenger seat air bag
ignition
• Ignition switch: ON
• After warning light pre-check
• Apply a load to the passenger
seat.
Permission
• Ignition switch: ON
• After warning light pre-check
• Undo a load from a passenger
seat.
Prohibition
SRS AIR BAG DIAGNOSIS
TSB Revision
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
52B-368
The following items can be read by the scan tool from the occupant classification-ECU input data.
ACTUATOR TEST REFERENCE TABLE
M1524003600198
The scan tool activates the following actuators for testing.
FAIL-SAFE FUNCTION REFERENCE TABLE
M1524003700151
If the SRS-ECU determines that the following parts
are defective, the SRS-ECU operates the SRS warn-
ing light and controls as follows.
• If the seat slide sensor is defective, the SRS-ECU
determines that the seat is in its backward posi-
tion and controls the air bag.
• If the occupant classification sensor or the occu-
pant classification-ECU is defective, the
SRS-ECU determines that the occupant classifi-
cation is class 2 [The occupant classification sen-
sor detects 30 kg (66 pounds) or more.] and
controls the air bag and the passenger’s air bag
OFF indicator light.
ACCURACY CHECK OF OCCUPANT CLASSIFICATION SENSOR REFERENCE TABLE
M1524025800060
The scan tool can be used to perform the next func-
tion.
• Seat Weight Sensor Accuracy Check
• Zero-calibration
Item No.
Display on M.U.T.-III
Check condition
Normal condition
01
Passenger weight
Apply a load to the passenger seat.
Load equivalent to passenger
seat crew member load
02
Dr seat position sensor
current
Slide the seat the back-end to the
front-position.
0 to 1,700 mA
03
Dr seat position sensor
voltage
Slide the seat the back-end to the
front-position.
0 to 5,000 mV
07
Dr seat position sensor
status
Slide the seat the back-end to the
front-position.
Not in Frontal Zone/In Frontal
Zone/Undetermined
08
occupant classification
status
Apply a load to the passenger seat.
Empty/RFIS/Child/More
5th%/Undermined
10
Battery voltage
Always
6.5 to 16 V
21
Pa seat weight sensor 1
RR
Apply a load to the passenger seat.
Load equivalent to passenger
seat crew member load
22
Pa seat weight sensor 1
RR volt
Apply a load to the passenger seat.
0 to 5,000 mV
23
Pa seat weight sensor 2
RF
Apply a load to the passenger seat.
Load equivalent to passenger
seat crew member load
24
Pa seat weight sensor 2
RF volt
Apply a load to the passenger seat.
0 to 5,000 mV
25
Pa seat weight sensor 3
LF
Apply a load to the passenger seat.
Load equivalent to passenger
seat crew member load
26
Pa seat weight sensor 3
LF volt
Apply a load to the passenger seat.
0 to 5,000 mV
27
Pa seat weight sensor 4
LR
Apply a load to the passenger seat.
Load equivalent to passenger
seat crew member load
28
Pa seat weight sensor 4
LR volt
Apply a load to the passenger seat.
0 to 5,000 mV
30
VIN Information
Always
−
Item No.
01
SRS warning light
SRS warning light illumination
ON
SPECIAL TOOLS
TSB Revision
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
52B-369
SPECIAL TOOLS
M1524000701274
Tool
Tool number and name
Supersession
Application
MB990803
Steering wheel puller
General service tool
Steering wheel removal
MB991958
a: MB991824
b: MB991827
c: MB991910
d: MB991911
e: MB991914
f: MB991825
g: MB991826
Scan tool (M.U.T.-III sub
assembly)
a: Vehicle communication
interface (V. C. I.)
b: M.U.T.-III USB cable
c: M.U.T.-III main harness
A (Vehicles with CAN
communication
system)
d: M.U.T.-III main
harness B (Vehicles
without CAN
communication
system)
e: M.U.T.-III main
harness C (for Daimler
Chrysler models only)
f: M.U.T.-III measurement
adapter
g: M.U.T.-III trigger
harness
MB991824-KIT
NOTE: g: MB991826
M.U.T.-III Trigger
Harness is not
necessary when
pushing V.C.I. ENTER
key.
Checking diagnostic trouble code
CAUTION
For vehicles with CAN
communication, use M.U.T.-III
main harness A to send
simulated vehicle speed. If you
connect M.U.T.-III main harness
B instead, the CAN
communication does not
function correctly.
MB991865
Dummy resistor
SRS air bag and seat belt with
pre-tensioner circuit check
MB991866
Resistor harness
Driver’s and passenger’s (front)
air bag and side-air bag circuit
check
MB990803AB
MB991910
MB991826
MB991958
MB991911
MB991914
MB991824
MB991827
MB991825
Do not use
a
b
c
d
e
f
g
Do not use
MB991865
MB991866
TEST EQUIPMENT
TSB Revision
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
52B-370
TEST EQUIPMENT
M1524000800513
MB991884
Resistor harness
Knee air bag, curtain air bag and
seat belt with pre-tensioner circuit
check
MB991885
Adapter harness
Deployment of Knee air bag,
curtain air bag and seat belt with
pre-tensioner inside or outside
the vehicle
MB991223
a: MB991219
b: MB991220
c: MB991221
d: MB991222
Harness set
a: Test harness
b: LED harness
c: LED harness adaptor
d: Probe
General service tools
Checking the continuity and
measuring the voltage at the
SRS-ECU harness connector
MB992102
Air bag inflation adapter
harness
Deployment of driver’s and
passenger’s (front) air bag
module inside or outside the
vehicle
MB992006
Extra fine probe
General service tool
Continuity check and voltage
measurement at harness wire or
connector for loose, corroded or
damaged terminals, or terminals
pushed back in the connector.
Tool
Tool number and name
Supersession
Application
MB991884
MB991885
MB991223
a
d
c
b
Do not use
BD
MB992102
MB992006
Tool
Name
Use
Digital multi-meter
Use a multi-meter for which the maximum
test current is 2 mA or less at the minimum
range of resistance measurement
Checking the SRS electrical circuitry with
SRS check harness
AC000019AB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст