Mitsubishi Evolution X. Manual — part 1003
MMCS
TSB Revision
CHASSIS ELECTRICAL
54A-373
SPEAKER CHECK
1. Select "Speaker Check" on "Service" screen.
2. Select a speaker to be checked, and play test tone through
the speaker.
NOTE:
.
•
The number of the speakers being displayed depends on
how many speakers are connected.
•
Volume cannot be adjusted while test tone is being
played.
•
During the test, only the selected speaker sounds. If
"Back" is selected during the test, the test tone will disap-
pear.
.
VERSIONS INDICATION
Displays versions indication (Loader, Application, Audio Micro-
computer, Navi Sub Microcomputer, Map Data, Monitor, and
CAN BOX).
1. Select "Versions Indication" on "Service" screen.
2.3.Versions indication is displayed.
.
AC611541
AB
Speaker Check
F L
R L
F R
R R
RW
Back
AC611716
AB
AC611541
AB
AC610673
Version Information
Loader
Application
Navi Sub Microcomputer
Audio Microcomputer
Map Data
Monitor
CAN BOX
Back
AB
MMCS
TSB Revision
CHASSIS ELECTRICAL
54A-374
SENSOR CHECK
The speed sensor and gyro sensor will be checked, depending
on the vehicle conditions such as driving condition, stationary
condition and travel direction change.
1. Select "Sensor Check" on "Service" screen.
2. The sensor check with the vehicle stationary will be
executed in accordance with the screen.
3. The sensor check with the vehicle in motion will be executed
in accordance with the screen.
AC611541
AB
Back
Start
Sensor Check
You can check the sensors.
Please don't move your car until after 5 seconds. After this you
can move your car by changing the directions. lf you are ready.
please push Start
AC606311
Sensor Check
Please don't move your car.
AC606332
Sensor Check
Please move more than 10m
while changing direction of the car.
AC606334
MMCS
TSB Revision
CHASSIS ELECTRICAL
54A-375
4. When the sensor checks are complete, the screen will
display the check results.
NOTE: If there is "NG" or "N/A" as the check results, select
"NG Code" on the "Sensor Check" screen. Then "NG code
Indication" screen will show the NG code.
NG CODE REFERENCE TABLE FOR SENSOR CHECK
.
Back
NG Code
Sensor Check
Gyro Sensor
Speed Sensor
NG
OK
AC606335
Sensor
classification
NG code
No.
Error items
Gyro sensor
1
Offset error while the vehicle is
stationary (lower limit error)
2
Offset error while the vehicle is
stationary (upper limit error)
5
Output error during driving
Speed sensor 6
Output error while the vehicle is
stationary
Back
NG Code Indication
Gyro Sensor
5
AC606336
MMCS
TSB Revision
CHASSIS ELECTRICAL
54A-376
TOUCH SWITCH CONFIRMATION
1. Select "Touch Switch Confirmation" on "Service" screen.
2. If you touch the screen, the color of the dotted coordinate at
the touched area will be changed.
.
AC611541
AB
If you complete the touch switch confirmation.
please push [MENU]
AC606337
AC611394
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст