Mitsubishi Evolution X. Manual — part 60
WINDSHIELD WIPER AND WASHER
TSB Revision
EXTERIOR
51-10
Rain sensitive AUTO wiper function <Optional: Vehicles for USA with lighting control
sensor (rain sensor)>
Lighting control sensor (rain sensor) has been
installed on the upper part of the windshield to sense
the raindrops and windshield wiper can be operated
automatically when the ignition switch is at ON and
wiper switch at AUTO position.
• The amount of rainfall on the windshield surface
are detected by using the infrared reflection, and
the windshield wiper is controlled by intermittent
operation or LO and HI operation automatically
depending on the amount of rainfall.
• Dry windshield: All infrared rays emitted from the
emitter diode are reflected by the windshield and
directed to the receiver diode as they are.
• Wet windshield: Part of the infrared rays emitted
from the emitter diode are transmitted to outside
of the windshield through the raindrops, and the
infrared rays with reduced intensity are directed
to the receiver diode.
NOTE: Using the configuration function, the rain sen-
sitive AUTO wiper function can be invalidated (Refer
to
AC708778AB
Windshield
Lighting control sensor (rain sensor)
Windshield
Receiver diode
Emitter diode
Raindrop
High
intensity
Receiver diode
Emitter diode
Reduced
intensity
Windshield
Optical
element
Optical
element
Dry windshield
Wet windshield
Infrared rays
Infrared rays
FRONT STEP PLATE <MR>
TSB Revision
EXTERIOR
51-11
FRONT STEP PLATE <MR>
M2510000600348
CONSTRUCTION DIAGRAM
Front step plates are attached to the both side sills
shown in the figure in order to enhance the brand
image.
DOOR MIRRORS
M2510008100552
CONSTRUCTION DIAGRAM
The outside mirror (door mirror) is a folded type and
has the following characteristics.
• Aerodynamic door mirror shape reduces wind
noises, and the door glasses and mirrors do not
easily get wet while driving in a rainy day.
• Electric remote-controlled door mirrors
AC708777AB
Front step plate
Side sill
AC607910AC
Door mirror assembly
Mirror glass
Remote control
mirror switch
CONFIGURATION FUNCTION
TSB Revision
EXTERIOR
51-12
CONFIGURATION FUNCTION
M2510001400284
Using the ETACS system of scan tool MB991958,
the following functions can be programmed. The pro-
grammed information is held even when the battery
is disconnected.
Adjustment
item (scan tool
MB991958
display)
Adjustment item
Adjusting content
(scan tool MB991958
display)
Adjusting content
Front wiper
operation
Adjustment of the
intermittent
windshield wiper
operation <vehicles
without auto light>
Normal INT
Intermittent wiper interval is fixed to 4
seconds.
Variable INT
Intermittent wiper interval is calculated only
by the wiper volume control.
Speed Sensitive
Intermittent wiper interval is calculated
according to the intermittent wiper volume
control and vehicle speed (default).
Adjustment of the
intermittent
windshield wiper
operation <vehicles
with auto light>
Normal INT
Intermittent wiper interval is fixed to 4
seconds.
Variable INT
Intermittent wiper interval is calculated only
by the wiper volume control.
Speed Sensitive
Intermittent wiper interval is calculated
according to the intermittent wiper volume
control and vehicle speed.
Rain Sensitive
Intermittent wiper interval is calculated
according to the intermittent wiper volume
control and lighting control sensor
(default).
Front wiper
washer
Disabling or
enabling
washer-linked wiper
function
Only washer
No function
Washer&wiper
With function (default)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст