Mitsubishi Outlander XL. Manual — part 1212
Symptom
Inspection
procedure
Reference
page
Air outlet vent cannot be changed.
8
Rear window defogger does not operate.
9
Blower motor power supply system.
10
When sunlight intensity changes, air outlet temperature does not change. 11
SYMPTOM PROCEDURES
INSPECTION PROCEDURE 11: When Sunlight Intensity Changes, Air Outlet
Temperature does not Change.
M15504000137USA0000010000
Photo Sensor Circuit
A/C-ECU
PHOTO
SENSOR
ZC6008760043
Connectors: C-05, C-109
C-109 (B)
C-05
CIRCUIT OPERATION
When the blower air temperature cannot be changed
even if the preset temperature is changed, the
sensors may be defective.
TROUBLESHOOTING HINTS
⦆
Malfunction of the photo sensor
⦆
Malfunction of the A/C-ECU
⦆
Malfunction of connector.
⦆
Malfunction of the harness.
DIAGNOSIS
Required Special Tools:
⦆
MB991223: Harness Set
AUTOMATIC AIR CONDITIONING
55B-11
AUTO A/C DIAGNOSIS
⦆
MB992006: Extra Fine Probe
⦆
MB991958: Scan Tool (M.U.T.-III Sub Assembly)
⦆
MB991824: V.C.I.
⦆
MB991827: M.U.T.-III USB Cable
⦆
MB991910: M.U.T.-III Main Harness A
STEP 1. Check the defogger and outside/inside air selection
damper control motor operation.
Q:Do the defogger and outside/inside air selection damper
control motor work normally?
YES:
Go to Step 2.
NO:
Refer to GROUP 55A, Symptom chart, P.55A-60.
STEP 2. Recheck for diagnostic trouble code.
ZC501967
AC404789
ZC5019680000
MB991824
MB991827
MB991910
Data link
connector
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991958.
Recheck if the DTC is set.
(1)
Erase the DTC.
(2)
Turn the ignition switch to "ON" position.
(3)
Check if the DTC is set.
Q:Is the check result satisfactory?
YES:
Go to Step 3.
NO:
STEP 3. Using scan tool MB991958, check data list.
(1)
Connect scan tool MB991958 to the data link connector.
(2)
Start the engine.
(3)
Set scan tool MB991958 to the data reading mode.
⦆
Item 67: Photo sensor
(4)
Cover the photo sensor and security indicator with your hand
or a shop towel.
NOTE:
Check that the voltage displayed on the scan tool
changes.
(5)
Turn the ignition switch to the "LOCK" (OFF) position.
Q:Does the voltage displayed on the scan tool change when
the photo sensor and security indicator is covered?
YES:
Replace the A/C-ECU. Check that the A/C works
normally.
NO:
Go to Step 4.
55B-12
AUTOMATIC AIR CONDITIONING
AUTO A/C DIAGNOSIS
STEP 4. Check A/C-ECU connector C-109 and photo sensor
connector C-05 for loose, corroded or damaged terminals,
or terminals pushed back in the connector.
Q:Are A/C-ECU connector C-109 and photo sensor
connector C-05 in good condition?
YES:
Go to Step 5.
NO:
Repair or replace the connector. Refer to GROUP 00E,
Harness Connector Inspection P.00E-2.
STEP 5. Check the wiring harness between photo sensor
connector C-05 (terminals 4 and 5) and A/C-ECU connector
C-109 (terminals 19 and 18).
Q:Is the wiring harness between photo sensor connector
C-05 (terminals 4 and 5) and A/C-ECU connector C-109
(terminals 19 and 18) in good condition?
YES:
Go to Step 6.
NO:
Repair the wiring harness. Check that the A/C works
normally.
STEP 6. Replace the photo sensor.
Q:Does the A/C operate normally?
YES:
No action is necessary and testing is complete.
NO:
Replace the A/C-ECU. Check that the A/C works
normally.
DATA LIST REFERENCE TABLE
M15504000051USA0000010000
Item No.
Check items
Inspection status
The
display
contents
under
normal
conditions
17
Engine speed
-
Displays
correct
engine speed.
19
Ambient
temperature
sensor
-
Ambient
temperature is the
same as scan tool
displayed
temperature
20
Air thermo sensor
-
Evaporator outlet
temperature is the
same as scan tool
displayed
temperature.
21
Interior
temperature
sensor
-
Interior
temperature is the
same as scan tool
displayed
temperature
AUTOMATIC AIR CONDITIONING
55B-13
AUTO A/C DIAGNOSIS
Item No.
Check items
Inspection status
The
display
contents
under
normal
conditions
23
Temperature setting
Displays
air
conditioning
set
temperature.
24
ETC sensor
-
Engine
coolant
temperature is the
same as scan tool
displayed
temperature.
26
Vehicle speed
-
Displays
vehicle
speed.
27
A/C Compressor drive
request
Compressor ON
ON
Compressor OFF
OFF
28
Air conditioning switch
Air conditioning switch ON
ON
Air conditioning switch OFF
OFF
29
Refrigerant leak
-
Normal
34
Idel up request
-
Displays
idle-up
request signal.
45
In/out select damper
poten (target)
-
Displays outside/
inside air selection
damper
target
position.
46
In/out
select
damp
potentiometer
-
Displays outside/
inside air selection
damper position.
55
Air
outlet
c/o
potentiometer
-
Displays air outlet
changeover
damper position.
56
Air outlet c/o potentio.
(Target)
-
Displays air outlet
changeover
damper
target
position.
57
Low pressure judgment -
Normal
60
Rear defogger switch
Rear window defogger switch ON
ON
Rear window defogger switch OFF
OFF
61
Pressure sensor
-
Displays
refrigerant
pressure.
63
Air mix potentiometer
-
Displays the air mix
damper position.
67
Photo sensor
-
Displays sunload.
55B-14
AUTOMATIC AIR CONDITIONING
AUTO A/C DIAGNOSIS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст