Mitsubishi Outlander XL. Manual — part 945
NO:
Repair the wiring harness.
STEP 3. Retest the system
Q:Is the communication between scan tool and SRS-ECU
possible?
YES:
Intermittent malfunction (Refer to GROUP 00, How to
Use Troubleshooting/Inspection Service Points -How to
Cope with Intermittent Malfunction P.00-15.)
NO:
Replace SRS-ECU. (Refer to P.52B-326.)
INSPECTION PROCEDURE 3:The SRS Warning Light does not Illuminate.
M15204000104USA0000010000
CIRCUIT OPERATION
⦆
SRS-ECU sends the SRS warning light signal to the
combination meter via the CAN communication.
⦆
As a cause, the failure of CAN bus line, combination
meter, or SRS-ECU is suspected.
TROUBLESHOOTING HINTS
⦆
Damaged wiring harness and connectors
⦆
Combination meter malfunction
⦆
Malfunction of SRS-ECU
DIAGNOSIS
STEP 1. Combination meter check
Use scan tool to perform the combination meter actuator tests.
Q:Is the check result normal?
YES:
Replace SRS-ECU. (Refer to P.52B-326.)
NO:
Replace the combination meter (Refer to GROUP 54Ab,
INSPECTION PROCEDURE 4: The SR SWarning Light does not Go Out.
M15204000105USA0000010000
CIRCUIT OPERATION
⦆
SRS-ECU sends the SRS warning light signal to the
combination meter via the CAN communication.
⦆
As a cause, the failure of CAN bus line, combination
meter, or SRS-ECU is suspected.
TROUBLESHOOTING HINTS
⦆
Damaged wiring harness and connectors
⦆
Combination meter malfunction
⦆
Malfunction of SRS-ECU
DIAGNOSIS
Required Special Tools:
⦆
MB991958: Scan Tool (M.U.T.-III Sub Assembly)
⦆
MB991824: Vehicle Communication Interface (V.C.I.)
⦆
MB991817: M.U.T.-III USB Cable
⦆
MB991910: M.U.T.-III Main Harness A (Vehicles with
CAN Communication System)
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
52B-311
SRS AIR BAG DIAGNOSIS
STEP 1. Using scan tool MB991958, diagnose the CAN bus
line.
ZC501967
AC404789
ZC5019680000
MB991824
MB991827
MB991910
Data link
connector
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991958.
Use scan tool MB991958 to diagnose the CAN bus lines.
(1)
Connect scan tool MB991958 to the data link connector.
(2)
Turn the ignition switch to the "ON" position.
(3)
Diagnose the CAN bus line.
Q:Is the check result satisfactory?
YES:
Replace the SRS-ECU. (Refer to P.52B-326.)
NO:
Repair the CAN bus line (Refer to GROUP 54D,
DATA LIST REFERENCE TABLE
M15204000035USA0000010000
DATA LIST OUTPUT
The following items can be read by the scan tool from
the SRS-ECU input data.
Item No.
Check items
Check conditions
Normal conditions
01
SRS
warning
light
illumination request
⦆
Ignition switch: ON
⦆
After warning lamp pre-check
OFF
⦆
Ignition switch: ON
⦆
During warning lamp pre-check
ON
The following items can be read by the scan tool from
the occupant classification-ECU input data.
Item No.
Check items
Check conditions
Normal conditions
01
Passenger weight
Apply a load to the passenger
seat.
-2048 Kg (4515 Ib) to 2048 Kg
(4515 Ib)
02
Dr seat position sensor
current
Slide the seat the back-end to the
front-position.
0 to 4095.93 mA
03
Dr seat position sensor
voltage
Slide the seat the back-end to the
front-position.
0 to 5000 mV
07
Dr seat position sensor
status
Slide the seat the back-end to the
front-position.
Not in Frontal Zone/In Frontal
Zone/Undetermined
08
occupant classification
status
Apply a load to the passenger
seat.
Empty/PFIS/Child/More 5th %/
Undermined
52B-312
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
SRS AIR BAG DIAGNOSIS
Item No.
Check items
Check conditions
Normal conditions
10
Battery voltage
Always
0 to 30 V
21
Pa seat weight sensor 1
RR
Apply a load to the passenger
seat.
-2048 Kg (4515 Ib) to 2048 Kg
(4515 Ib)
22
Pa seat weight sensor 1
RR volt
Apply a load to the passenger
seat.
0 to 5000 mV
23
Pa seat weight sensor 2
RF
Apply a load to the passenger
seat.
-2048 Kg (4515 Ib) to 2048 Kg
(4515 Ib)
24
Pa seat weight sensor 2
RF volt
Apply a load to the passenger
seat.
0 to 5000 mV
25
Pa seat weight sensor 3
LF
Apply a load to the passenger
seat.
-2048 Kg (4515 Ib) to 2048 Kg
(4515 Ib)
26
Pa seat weight sensor 3
LF volt
Apply a load to the passenger
seat.
0 to 5000 mV
27
Pa seat weight sensor 4
LR
Apply a load to the passenger
seat.
-2048 Kg (4515 Ib) to 2048 Kg
(4515 Ib)
28
Pa seat weight sensor 4
LR volt
Apply a load to the passenger
seat.
0 to 5000 mV
30
VIN Information
Always
-
ACTUATOR TEST REFERENCE TABLE
M15204000036USA0000010000
The scan tool activates the following actuators for
testing.
Item No.
Item name
Test item
Driven
component
01
SRS warning light
SRS warning light illumination
ON
FAIL-SAFE FUNCTION
M15204000037USA0000010000
If the SRS-ECU determines that the following parts
are defective, the SRS-ECU operates the SRS
warning light and controls as follows.
⦆
If the seat slide sensor is defective, the SRS-ECU
determines that the seat is in its backward position
and controls the air bag.
⦆
If the occupant classification sensor or the occupant
classification-ECU is defective, the SRS-ECU
determines that the occupant classification is class
2 [The occupant classification sensor detects 30 kg
(66 pounds) or more.] and controls the air bag and
the passenger’s air bag OFF indicator light.
ACCURACY TESTING OF OCCUPANT CLASSIFICATION SENSOR
M15204000989USA0000010000
The scan tool can be used to perform the next
function.
⦆
Seat Weight Sensor Accuacy Check
⦆
Zero-calibration
SPECIAL TOOLS
M15204000007USA0000010000
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
52B-313
SRS AIR BAG DIAGNOSIS
Tool
Tool number and name Supersession
Application
MB990803
MB990803
Steering wheel puller
General service tool
Steering wheel removal
MB991910
MB991826
YB9919580000
MB991911
MB991914
MB991824
MB991827
MB991825
Do not use
Do not use
a
b
c
d
e
f
g
MB991958
A: MB991824
B: MB991827
C: MB991910
D: MB991911
E: MB991914
F: MB991825
G: MB991826
M.U.T.-III Sub Assembly
A:
Vehicle
communication
interface (V.C.I.)
B: M.U.T.-III USB cable
C:
M.U.T.-III
main
harness A (Vehicles
with
CAN
communication system)
D:
M.U.T.-III
main
harness B (Vehicles
without
CAN
communication system)
E:
M.U.T.-III
main
harness C (for Daimler
Chrysler models only)
F:
M.U.T.-III
measurement adapter
G: M.U.T.-III Trigger
Harness
MB991824-KIT
NOTE:
G: MB991826
M.U.T.-III Trigger
Harness is not
necessary when pushing
V.C.I. ENTER key.
Checking diagnostic trouble code
M.U.T.-III main harness A
(MB991910) should be used.
M.U.T.-III main harness B and C
should not be used for this
vehicle.
MB991865
MB991865
Dummy resistor
SRS air bag and seat belt with pre-
tensioner circuit check
MB991866
MB991866
Resistor harness
SRS air bag circuit check
52B-314
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
SPECIAL TOOLS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст