Mitsubishi Outlander XL. Manual — part 1004
Headlight Levelling Unit Circuit
HEADLIGHT ASSEMBLY
[HEADLIGHT LEVELING
UNIT (LH)]
HEADLIGHT ASSEMBLY
[HEADLIGHT LEVELING
UNIT (RH)]
HEADLIGHT
AUTOMATIC
LEVELING-ECU
MOTOR
DRIVE
CIRCUIT
CPU
CPU
VOLTAGE
COMPARISON
CIRCUIT
MOTOR
DRIVE
CIRCUIT
VOLTAGE
COMPARISON
CIRCUIT
ZC6008710009
Connector: A-56
A-56 (B)
LIGHTING
54Ac-89
DIAGNOSIS
ZC6008720006
Connector: A-37
A-37 (B)
ZC6008760030
Connector: C-110
TECHNICAL DESCRIPTION (COMMENT)
If either automatic leveling does not operate, the wiring harness
and connector(s) between the headlight automatic leveling-ECU
and the headlight leveling unit, or the headlight assembly
(headlight leveling unit) may have a problem.
TROUBLESHOOTING HINTS
⦆
Malfunction of headlight assembly (headlight leveling unit)
⦆
The wiring harness or connectors may have loose, corroded,
or damaged terminals, or terminals pushed back in the
connector
DIAGNOSIS
STEP 1. Check headlight leveling unit.
Perform a leveling motor drive test of the headlight leveling unit
to check that the motor is driven. Refer to P.54Ac-177.
Q:Do Headlight leveling unit work normal?
YES:
The trouble can be an intermittent malfunction
(Refer to GROUP 00 - How to Use Troubleshooting/
Inspection Service Points - How to Cope with Intermittent
Malfunction P.00-15).
NO (The left leveling motor is not driven.):
Go to Step 2.
NO (The right leveling motor is not driven.):
Go to Step 5.
STEP 2. Check headlight automatic leveling-ECU connector
C-110, Headlight leveling unit (LH) connector A-37 for loose,
54Ac-90
LIGHTING
DIAGNOSIS
corroded or damaged terminals, or terminals pushed back
in the connector.
Q:Is headlight automatic leveling-ECU connector C-110,
Headlight leveling unit (LH) connector A-37 in good
condition?
YES:
Go to Step 3.
NO:
Repair the damaged parts.
STEP 3. Check wiring harness between headlight automatic
leveling-ECU connector C-110 (terminal No. 2/3/4) and
headlight leveling-unit (LH) connector A-37 (terminal No.
11/10/12).
Q:Is headlight automatic leveling-ECU connector C-110
(terminal No. 2/3/4) and headlight leveling-unit (LH)
connector A-37 (terminal No. 11/10/12) in good
condition?
YES:
Go to Step 4.
NO:
Repair the wiring harness.
STEP 4. Retest the system.
Check that the automatic leveling of the left headlight operates
normally.
Q:Is the check result normal?
YES:
The trouble can be an intermittent malfunction
(Refer to GROUP 00 - How to Use Troubleshooting/
Inspection Service Points - How to Cope with Intermittent
Malfunction P.00-15).
NO:
Replace the headlight assembly (LH).
STEP 5. Check headlight automatic leveling-ECU connector
C-110,Headlight leveling unit (RH) connector A-56 for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q:Is
headlight
automatic
leveling-ECU
connector
C-110,Headlight leveling unit (RH) connector A-56 in
good condition?
YES:
Go to Step 6.
NO:
Repair the damaged parts.
STEP 6. Check wiring harness between headlight automatic
leveling-ECU connector C-110 (terminal No. 11/12/13) and
headlight leveling-unit (LH) connector A-37 (terminal No.
11/10/12).
Q:Is headlight automatic leveling-ECU connector C-110
(terminal No. 11/12/13) and headlight leveling-unit (LH)
connector A-37 (terminal No. 11/10/12) in good
condition?
YES:
Go to Step 7.
NO:
Repair the wiring harness.
LIGHTING
54Ac-91
DIAGNOSIS
STEP 7. Retest the system.
Check that the automatic leveling of the right headlight operates
normally.
Q:Is the check result normal?
YES:
The trouble can be an intermittent malfunction
(Refer to GROUP 00 - How to Use Troubleshooting/
Inspection Service Points - How to Cope with Intermittent
Malfunction P.00-15).
NO:
Replace headlight assembly (RH)
Inspection Procedure 4: The headlight automatic leveling warning is not displayed.
M15410900110USA0000010000
Before replacing the ECU, ensure that the power supply
circuit, the ground circuit and the communication circuit are
normal.
54Ac-92
LIGHTING
DIAGNOSIS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст