Mitsubishi Outlander XL. Manual — part 981
ZC5012170000
(NAS_10)
(NAS_11)
(NAS_20)
(NAS_21)
9.
When the meter information switch is pressed for less than 1.2
seconds, the schedule is shifted, and when the switch is
pressed for 1.2 seconds or longer, the displayed schedule is
set.
10.
The schedule set in Step 9 is displayed for 3 seconds, and
the warning period to the next time is displayed.
Schedule table
Schedule
Warning types
Warning criteria
NAS 10 (initial
setting)
Elapsed time (month)
Every 6 elapsed months
Driving distance (miles)
Every 7,500 miles of driving distance
Driving distance (km)
Every 12,000 km of driving distance
NAS 11
Elapsed time (month)
Every 3 elapsed months
Driving distance (miles)
Every 3,750 miles of driving distance
Driving distance (km)
Every 6,000 km of driving distance
NAS 20
Elapsed time (month)
Every 5 elapsed months
Driving distance (miles)
Every 5,000 miles of driving distance
Driving distance (km)
Every 8,000 km of driving distance
NAS 21
Elapsed time (month)
Every 4 elapsed months
Driving distance (miles)
Every 3,750 miles of driving distance
Driving distance (km)
Every 6,000 km of driving distance
HOW TO INACTIVATE THE SERVICE
REMINDER FUNCTION
By setting to "OFF Display" or "Function OFF" when
the schedule is set, the service reminder function can
be inactivated.
When "OFF Display" is selected
⦆
Even when the check warning period is reached,
the service reminder display is not displayed.
⦆
Even if the service reminder screen is displayed by
the meter information switch operation, "OFF" is
displayed.
When "Function OFF" is selected
⦆
Even when the check warning period is reached,
the service reminder display is not displayed.
⦆
Even with the meter information switch operation,
the service reminder screen is not displayed.
COMBINATION METER ASSEMBLY
REMOVAL AND INSTALLATION
M15410100043USA0000010000
When the combination meter is required to be
replaced, the current driving distance and number
of elapsed days must be entered into the meter
after the replacement in order to be used for
service reminder function. Therefore, read
COMBINATION METER
54Ab-77
COMBINATION METER ASSEMBLY
"Integrated mileage for reminder," "Integrated
days for reminder," "Mileage until Extra
reminder," "Months until Extra reminder," and
"Current Schedule" from the meter before the
replacement using the special function of scan
tool MB991958, and note them. For the operation
method of scan tool MB991958, refer to P.
54Ab-70. If "Integrated mileage for reminder" or
"Integrated days for reminder" cannot be read by
the scan tool MB991958, follow the method
described below.
⦆
For the driving distance for check warning, use
the driving distance displayed on the multi
information display.
⦆
For the elapsed days for check warning,
calculate the number of elapsed days from the
delivery date to the customer (service
remainder function start date) and current date.
ZC6011390000
1
Section A – A
Clip
1
3
A
A
2
NOTE:
Clip positions
Removal Steps
·
Side air outlet (Refer to GROUP 52A,
Instrument Panel Assembly P.
52A-2.)
·
Connection of meter information
switch connector
Removal Steps
1.
Meter hood assembly
2.
Combination meter
3.
Meter information switch
54Ab-78
COMBINATION METER
COMBINATION METER ASSEMBLY
DISASSEMBLY AND ASSEMBLY
M15410100044USA0000010000
ZC6032880000
1
2
Disassembly steps
1.
Combination meter glass
Disassembly steps
2.
Combination meter
CHECK AT ECU TERMINALS
M15410100036USA0000010000
ZC6033190000
Connector:
C-03
Termin
al No.
Check item
Check conditions
Normal conditions
1
ECU power supply (battery) Always
Battery voltage
2
ECU power supply (Ignition
switch: IG1)
Ignition switch: ON
Battery voltage
Ignition switch: OFF
0 V
3
Meter information switch
input
Meter information switch: ON
0 V
Meter information switch: OFF
Approximately 5 V
4
Parking brake switch input Parking brake switch: ON
0 V
Parking brake switch: OFF
Approximately 5 V
5
Seat belt switch (driver’s
side) input
Seat belt switch (driver’s side): ON
0 V
Seat belt switch (driver’s side): OFF
Approximately 5 V
6
Headlamp levelling
During headlight levelling warning display
0 V
Without headlight levelling warning display
Approximately 5 V
7
-
-
-
8
Corner sensor RL
When sensor detection is made
0 V
When sensor detection is not made
Approximately 5 V
9
Corner sensor RR
When sensor detection is made
0 V
COMBINATION METER
54Ab-79
CHECK AT ECU TERMINALS
Termin
al No.
Check item
Check conditions
Normal conditions
When sensor detection is not made
Approximately 5 V
10
Corner sensor FL
When sensor detection is made
0 V
When sensor detection is not made
Approximately 5 V
11
Corner sensor FR
When sensor detection is made
0 V
When sensor detection is not made
Approximately 5 V
12
Car symbol input
When sensor detection is made
0 V
When sensor detection is not made
Approximately 5 V
13
Earth (sensor)
Always
0 V
14, 15
-
-
-
16
Front seat belt switch (LH)
input
Front seat belt switch (LH): ON
0 V
Front seat belt switch (LH): OFF
Approximately 5 V
17
Fuel level sensor input
Fuel: FULL
Approximately 1 V
Fuel: EMPTY
Approximately 4 V
18
Fuel level sensor input
Fuel: FULL
Approximately 1 V
Fuel: EMPTY
Approximately 4 V
19
-
-
-
20
Vehicle speed signal output Vehicle speed: Approximately 40 km/h
Approximately 28Hz
Vehicle speed change
In accordance with
the vehicle speed, a
pulse is generated.
21
Earth (ECU)
Always
0 V
22
Illumination (-) output
With daytime lighting control
0 V
With nighttime lighting control
In accordance with
the rheostat switch
operation, a pulse is
generated.
23
Illumination (+) output
With lighting control
Battery voltage
24
Illumination (power supply) Always
Battery voltage
54Ab-80
COMBINATION METER
CHECK AT ECU TERMINALS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст