Mitsubishi Outlander XL. Manual — part 1031
GENERAL INFORMATION
M15410600001USA0000010000
ETACS*-ECU has three main functions.
NOTE:
*: ETACS (Electronic Time and Alarm
Control System)
GATEWAY FUNCTION
ZC6004720000
Data link connector
ETACS-ECU
LIN
CAN-B
CAN-C
As a central ECU for the on-vehicle communication
network system established in the vehicle, the
gateway function is integrated into ETACS-ECU. The
gateway function offers the following functions:
⦆
Data transfer among four networks*
Transfers the data flowing in a network to another
network in real time.
NOTE:
*: CAN-C (power train network), CAN-B
(middle-speed body network), LIN (low-speed
body network), diagnostics CAN-C (diagnosis
exclusive network)
⦆
Diagnosis of each network communication line
Detects and stores an open circuit and short circuit
of communication line.
⦆
Communication error diagnosis of network ECUs
Detects and stores the ECU that is not properly
transmitting data.
CODING FUNCTION
By writing the coding data such as vehicle model,
destination, and equipment level to ECUs, the
functions of ECUs can be changed. There are two
types of coding method, the local coding and global
coding.
BODY ELECTRICAL EQUIPMENT CONTROL
FUNCTION
This function controls the following electrical
equipment.
⦆
Exterior lights
⦆
Wiper, washer
⦆
Central door locking system
⦆
Interior light
⦆
Keyless entry, keyless operation system
⦆
Theft alarm system
ETACS
54Ad-3
GENERAL INFORMATION
SPECIAL TOOL
M15410600002USA0000010000
Tool
Tool number and
name
Supersession
Application
MB991910
MB991826
YB9919580000
MB991911
MB991914
MB991824
MB991827
MB991825
Do not use
Do not use
a
b
c
d
e
f
g
MB991958
a.
MB991824
b.
MB991827
c.
MB991910
d.
MB991911
e.
MB991914
f.
MB991825
g.
MB991826
M.U.T.-III
sub
assembly
a.
Vehicle
communication
interface (V.C.I.)
b.
M.U.T.-III
USB
cable
c.
M.U.T.-III
main
harness
A
(Vehicles
with
CAN
communication
system)
d.
M.U.T.-III
main
harness
B
(Vehicles without
CAN
communication
system)
e.
M.U.T.-III
main
harness C (for
Daimler Chrysler
models only)
f.
M.U.T.-III
measurement
adapter
g.
M.U.T.-III trigger
harness
MB991824-KIT
NOTE:
G: MB991826
M.U.T.-III Trigger
Harness is not
necessary when
pushing V.C.I. ENTER
key.
M.U.T.-III main harness A
(MB991910) should be used.
M.U.T.-III main harness B and C
should not be used for this
vehicle.
ETACS-ECU check (Diagnostic
trouble code, service data)
54Ad-4
ETACS
SPECIAL TOOL
Tool
Tool number and
name
Supersession
Application
YB9912230000
Do not use
a
b
c
d
MB991223
a.
MB991219
b.
MB991220
c.
MB991221
d.
MB991222
Harness set
a.
Test harness
b.
LED harness
c.
LED
harness
adaptor
d.
Probe
General service tools Continuity check and voltage
measurement at harness wire or
connector for loose, corroded or
damaged terminals, or terminals
pushed back in the connector.
a.
Connector
pin
contact
pressure inspection
b.
Power circuit inspection
c.
Power circuit inspection
d.
Commercial tester connection
MB992006
MB992006
Extra fine probe
-
Making voltage and resistance
measurement
during
troubleshooting
DIAGNOSIS
STANDARD FLOW OF DIAGNOSTIC TROUBLESHOOTING
M15410600004USA0000010000
Refer to GROUP 00 - Troubleshooting contents P.
00-6.
DIAGNOSTIC FUNCTION
M15410600005USA0000010000
HOW TO CONNECT THE SCAN TOOL (M.U.T.-III)
Required Special Tools:
⦆
MB991958: Scan Tool (M.U.T.-III Sub Assembly)
⦆
MB991824: Vehicle Communication Interface (V.C.I.)
⦆
MB991827: M.U.T.-III USB Cable
⦆
MB991910: M.U.T.-III Main Harness A (Vehicles with
CAN communication system)
ETACS
54Ad-5
DIAGNOSIS
ZC501967
AC404789
ZC5019680000
MB991824
MB991827
MB991910
Data link
connector
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991958.
1.
Ensure that the ignition switch is at the "LOCK" (OFF) position.
2.
Start up the personal computer.
3.
Connect special tool MB991827 to special tool MB991824 and
the personal computer.
4.
Connect special tool MB991910 to special tool MB991824.
5.
Connect special tool MB991910 to the data link connector.
6.
Turn the power switch of special tool MB991824 to the "ON"
position.
NOTE:
When special tool MB991824 is energized, special
tool MB991824 indicator light will be illuminated in a
green color.
7.
Start the M.U.T.-III system on the personal computer.
NOTE:
Disconnecting scan tool MB991958 is the reverse of
the connecting sequence, making sure that the ignition
switch is at the "LOCK" (OFF) position.
HOW TO READ AND ERASE DIAGNOSTIC
TROUBLE CODES
Required Special Tools:
⦆
MB991958: Scan Tool (M.U.T.-III Sub Assembly)
⦆
MB991824: Vehicle Communication Interface (V.C.I.)
⦆
MB991827: M.U.T.-III USB Cable
⦆
MB991910: M.U.T.-III Main Harness A (Vehicles with
CAN communication system)
NOTE:
If the battery voltage is low, diagnostic trouble
codes will not be set. Check the battery if scan tool
MB991958 does not display.
1.
Connect scan tool MB991958 to the data link connector.
2.
Turn the ignition switch to the "ON" position.
3.
Select "System select" from the start-up screen.
4.
Select "From 2006 MY" of "Model Year." When the "Vehicle
Information" is displayed, check the contents.
5.
Select "ETACS" from "System List", and press the "OK"
button.
NOTE:
When the "Loading Option Setup" list is displayed,
check the applicable item.
6.
Select "Diagnostic Trouble Code."
7.
If a DTC is set, it is shown.
8.
Choose "Erase DTCs" to erase the DTC.
HOW TO DIAGNOSE THE CAN BUS LINES
Required Special Tools:
⦆
MB991958: Scan Tool (M.U.T.-III Sub Assembly)
54Ad-6
ETACS
DIAGNOSIS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст