Mitsubishi Outlander XL. Manual — part 1120
![](/vehicles/winoney/olyerd/ierigig/belphe.png)
MAIN UNIT TERMINAL VOLTAGE
M15410800091USA0000010000
ZC3061390000
D-16
D-06
<Rear display unit right view>
<Rear display unit left view>
D-06
Ter
mina
l No.
Input
and
output
Signal symbol Terminal
voltage (V)
Faulty harness wire
(s)
Trouble symptom due to faulty
harness wire(s)
Open
circuit
Short
circuit
1
-
GND
-
-
-
-
3
Input
+B
Battery
voltage
Applicable -
The rear monitor does not work.
-
Applicable The multi-purpose fuse is burned
out.
4
-
ACC+
Battery
voltage
Applicable -
The power cannot be turned ON
(eject works).
-
Applicable Multi-purpose fuse is blown.
5
Input
ILL+
0-battery
voltage
Applicable Applicable The image brightness changes to
the daytime mode.
8
Output VIDEO-OUT
0-1 Vp-p (AC) Applicable -
No DVD picture is displayed.
-
Applicable No DVD picture is displayed.
9
-
VIDEO-GND
-
Applicable -
No DVD picture is displayed.
10
Output AUDIO-L-OUT
0-battery
voltage (AC)
Applicable Applicable DVD sound (left) is not output.
AUDIO AND NAVIGATION SYSTEM
54B-161
DIAGNOSIS
![](/vehicles/winoney/olyerd/ierigig/aredal.png)
Ter
mina
l No.
Input
and
output
Signal symbol Terminal
voltage (V)
Faulty harness wire
(s)
Trouble symptom due to faulty
harness wire(s)
Open
circuit
Short
circuit
11
Output AUDIO-R-OUT 0-battery
voltage (AC)
Applicable Applicable DVD sound (right) is not output.
D-16
Term
inal
No.
Input
and
output
Signal symbol Terminal
voltage (V)
Faulty harness wire
(s)
Trouble symptom due to faulty
harness wire(s)
Open
circuit
Short
circuit
1
Input
and
output
VTR-VIDEO-IN 0-1 Vp-p (AC)
Applicable Applicable No external input picture is
displayed.
3
Output VTR-AUDIO-R-
IN
0-battery
voltage (AC)
Applicable Applicable External input sound (right) is not
output.
6
-
VTR-VIDEO-
SHIELD-GND
-
Applicable Applicable No external input picture is
displayed.
7
-
VTR-AUDIO-
SHIELD-GND
-
Applicable Applicable No external input picture is
displayed.
8
Output VTR-AUDIO-L-
IN
0-battery
voltage (AC)
Applicable Applicable External input sound (left) is not
output.
54B-162
AUDIO AND NAVIGATION SYSTEM
DIAGNOSIS
![](/vehicles/winoney/olyerd/ierigig/yodendppe.png)
ON-VEHICLE SERVICE
ADJUSTMENT OF VOLUME AND SOUND
QUALITY AUTOMATIC CORRECTION FUNCTION
M15410800359USA0000010000
ZC6003960001
Sound adjustment switch
When the following operations are performed with the audio
power ON, the sound volume during driving and the ON/OFF of
sound quality automatic correction function are switched.
1.
Press and hold (approximately 2 seconds) the sound
adjustment switch.
2.
SCV ON (when the automatic correction function is ON) or
SCV OFF (when the automatic correction function is OFF) is
displayed.
3.
Turn the sound adjustment switch knob to switch between
SCV ON and OFF.
4.
Press the sound adjustment switch or leave as it is for 10
seconds or more.
5.
Go back to the audio normal screen.
SPEAKER TEST
M15410800360USA0000010000
<VEHICLES WITHOUT MMCS>
HOW TO START SPEAKER CHECK MODE
With the ignition switch at the ACC position and the audio power
OFF, press the button in the following order.
AUDIO AND NAVIGATION SYSTEM
54B-163
ON-VEHICLE SERVICE
![](/vehicles/winoney/olyerd/ierigig/smyombim.png)
ZC6003960000
[CH1] button
[CH6] button
Fast-forward button
Rewind button
1.
Press the [CH1] button.
2.
Press the fast rewind button.
3.
Press the fast forward button.
4.
Press the [CH6] button.
NOTE:
To start the speaker check mode, perform the button
operations above within 60 seconds since turning OFF the
audio power.
SPEAKER CONNECTION CHECK MODE
With the speaker connection check mode, the connection status
of each speaker can be checked based on the sound output from
each speaker. The procedure is as follows.
ZC6003970000
<Display>
Front door speaker (LH)
and tweeter (LH)
Front door speaker (RH)
and tweeter (RH)
Rear door speaker (LH)
Rear door speaker (RH)
: not illuminated
: flashed
: illuminated
1.
At the same time with the start of speaker check mode, the
sound for speaker connection check is output from the front
door speaker (LH). Check the speaker connection of front door
speaker (LH) based on this sound output.
2.
Press the [CH6] button to switch the sound output for speaker
check from the front door speaker (LH) to the front door
speaker (RH). Check the speaker connection of front door
speaker (RH) based on the output of speaker connection
check sound from the front door speaker (RH).
3.
Press the [CH6] button again to switch the sound output for
speaker check from the front door speaker (RH) to the rear
door speaker (LH). Check the speaker connection of rear door
speaker (LH) based on the output of speaker connection
check sound from the rear door speaker (LH).
4.
Press the [CH6] button again to switch the sound output for
speaker check from the rear door speaker (LH) to the rear door
speaker (RH). Check the speaker connection of rear door
speaker (RH) based on the output of speaker connection
check sound from the rear door speaker (RH).
54B-164
AUDIO AND NAVIGATION SYSTEM
ON-VEHICLE SERVICE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст