Mitsubishi Outlander XL. Manual — part 1331
3.
On Step 2 completion, if the seat belt is not fastened when
the vehicle speed changes from 3 km/h to 8 km/h, the
indicator illuminates and blinks again and the alarm sounds
again.
When the front passenger's seat belt is released
1.
When the ignition switch is turned ON, the front passenger's
seat belt indicator illuminates for 6 seconds, regardless of
whether the front passenger's seat belt is fastened or
released. The alarm does not sound.
2.
60 seconds after the ignition switch is turned ON, the front
passenger's seat belt reminder operates the same manner
as for the driver's seat belt that is released, but the alarm does
not sound.
PADDLE SHIFT CANCEL TONE ALARM
When the paddle shift switch is operated, the tone alarm sounds.
THEFT-ALARM FUNCTION
When the theft-alarm function is activated, the tone alarm
sounds.
KEYLESS OPERATION KEY REMINDER TONE ALARM
FUNCTION (VEHICLES WITH KOS)/IGNITION KEY
REMINDER TONE ALARM FUNCTION (VEHICLES WITHOUT
KOS)
With the ignition switch in the LOCK (OFF) position, when the
driver's door is opened with the ignition key inserted into the
ignition key cylinder or the keyless operation key left in the
vehicle, the tone alarm sounds.
LIGHT REMINDER TONE ALARM FUNCTION
With the ignition switch in the LOCK (OFF) position, when the
driver's door is opened with the tail light switch remaining ON,
the tone alarm sounds.
DOOR-AJAR WARNING TONE ALARM FUNCTION
With the ignition switch in the ON position, when any of the doors
(including the liftgate) is open and the vehicle speed information
sent via the CAN communication is 8 km/h or more, the tone
alarm sounds.
FREEZE WARNING TONE ALARM
When the ignition switch is in the ON position, if the ambient
temperature is at 0°C or below, the tone alarm sounds.
54A-22
CHASSIS ELECTRICAL
COMBINATION METER
PARKING BRAKE REMINDER TONE ALARM FUNCTION
With the ignition switch in the ON position, if the parking brake
has not been reset (parking brake switch: ON), and when the
vehicle speed information transmitted via CAN communication
is 8 km/h or more, the tone alarm sounds.
MULTI INFORMATION DISPLAY INTERRUPT DISPLAY
TONE ALARM
When the interrupt display is displayed on the multi information
display because of alarms, the tone alarm sounds.
ETACS-ECU FUNCTION CUSTOMIZATION TONE ALARM
When entering into the customize mode of ETACS-ECU
functions or when the customization is executed, the tone alarm
sounds in each case.
A/C OPERATION TONE ALARM, AUDIO OPERATION TONE
ALARM
According to the tone alarm sounding request signal which is
received when the A/C, radio and CD player, CD changer or
audio visual navigation unit is operated, the tone alarm sounds.
METER INFORMATION SWITCH OPERATION TONE ALARM
When the meter information switch or rheostat switch is
operated, the tone alarm sounds.
TURN-SIGNAL LIGHT TONE ALARM FUNCTION
The tone alarm sounds in synchronization with the turn signal
light operation.
COLUMN SWITCH
GENERAL INFORMATION
M25400000001USA0000010005
Column switch ensures the driver's safety during
frontal collision of vehicle.
CHASSIS ELECTRICAL
54A-23
COLUMN SWITCH
Function
ZC5019540000
Front of vehicle
Collision load
Collision load
Column switch
Column switch
If the column switch is moved to the front of the vehicle
and hit on the instrument panel or meter bezel by the
frontal collision of vehicle, the steering wheel is moved
to the front of the vehicle because the right and left
levers fall down, ensuring the driver's safety. In
addition, the column switch secures the rigidity that
the levers do not fall down by the normal operation,
however, it cannot be reused after the deformation.
ACCESSORY
ACCESSORY SOCKET
GENERAL INFORMATION
M25400000001USA0000010003
The plug-in type accessory socket has been installed
for the convenient use of accessories.
54A-24
CHASSIS ELECTRICAL
ACCESSORY
ZC6004910000
Lower quarter trim (RH)
Accessory socket
Accessory socket
Accessory socket
⦆
Accessory socket has been added to the front floor
console.
⦆
Accessory sockets have been added to the rear
floor console and lower quarter trim (RH). <High
price class: Standard equipment, Medium price
class: Option>
⦆
The maximum load is 120 W when a single
accessory socket is used. When three accessory
sockets are used simultaneously, the combined
maximum load for three sockets is 120 W.
AC POWER SUPPLY
GENERAL INFORMATION
M25400000001USA0000010004
The AC power supply which can be used as power
supply for home electric appliances has been installed
to the rear floor console. <Option>
CHASSIS ELECTRICAL
54A-25
ACCESSORY
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст