Mitsubishi Outlander XL. Manual — part 1299
When the door is locked by the driver’s or passenger’s
door lock switch, the ETACS-ECU operates its door
lock relay and passes a current through the door lock
actuators of all the doors (including the liftgate) for
0.25 second to lock all the doors (including the
liftgate).
When the door is unlocked by the driver’s or
passenger's door lock switch, the ETACS-ECU
operates its door unlock relay and passes a current
through the door lock actuators of all the doors
(including the liftgate) for 0.25 second to unlock all the
doors (including the liftgate).
When the door is locked and unlocked by driver’s or
passenger's door lock switch consecutively, the
ETACS-ECU operates its door lock relay and passes
a current through the door lock actuators of all the
doors (including the liftgate) for 0.25 second to lock all
the doors (including the liftgate). Then, the ETACS-
ECU operates its door unlock relay and passes a
current through the door lock actuators of all the doors
(including the liftgate) for 0.25 second to unlock all the
doors (including the liftgate). Due to this, there may be
a time lag between the driver’s or passenger's door
lock switch actuation and the time when all the doors
(including the liftgate) are unlocked.
KEY-IN PREVENTION FUNCTION
When the driver's door inside lock knob is operated to
the lock position with the driver's door opened, the
driver's door cannot be locked, preventing it from
being locked with the key inside the vehicle.
SELECTOR "P" POSITION-LINKED DOOR
UNLOCKING FUNCTION
When the selector lever is shifted to the "P" (parking)
position with the ignition switch turned ON, all the
doors (including the liftgate) will be unlocked
automatically, improving passengers' convenience for
getting out. Using a customization feature, the
selector "P" position-linked door unlocking function
can be switched (Refer to P.42A-23).
ZC6001360000
t
T
ON
OFF
ON
OFF
Inhibitor switch "P"
Unlock relay output
t: 0.25 second
T: 0.3 second
When the selector lever is shifted to the P position with
the ignition switch turned ON, the transmission range
switch "P" turns ON, ETACS-ECU turns the unlock
relay output ON for 0.25 seconds to unlock all the
doors (including the liftgate).
DIRECT COMBINATION KEY CYLINDER
MECHANISM
ZC6001370000
Key cylinder
Door latch
Direct combination
key cylinder mechanism
The impact of a side collision is not easily transferred
to the door latch with the doors unlocked (to prevent
passengers from falling out of the vehicle).
Even if any door key cylinder is attempted to be
tampered with the doors locked, the tampering force
is not easily transferred to the door latch, to deter
thieves.
42A-14
BODY
DOOR AND LIFTGATE
CENTRAL DOOR LOCKING SYSTEM
DOOR LOCK OPERATION TABLE
Operation
Driver’s side
door
Passenger’s
side door
Rear door
Liftgate
Door lock key cylinder
Lock
Lock
Lock
Lock
Lock
Unlock
Unlock
Unlock
Unlock
Unlock
Door lock switch
Driver’s side
door
Lock
Lock
Lock
Lock
Lock
Unlock
Unlock
Unlock
Unlock
Unlock
Passenger’s
side door
Lock
Lock
Lock
Lock
Lock
Unlock
Unlock
Unlock
Unlock
Unlock
LIFTGATE
OPENING/CLOSING OF LIFTGATE
ZC6001380000
Upper liftgate
Lower liftgate
Liftgate lock release handle knob
<Liftgate full close>
<Liftgate full open>
⦆
The upper/lower split liftgate has been adopted.
BODY
42A-15
DOOR AND LIFTGATE
⦆
To open the lower liftgate, open the upper liftgate
first and operate the liftgate lock release handle
knob in the direction of the arrow as shown in the
figure. Then the lower liftgate will be opened.
NOTE:
Lower liftgate cannot be opened alone.
⦆
To close the lower liftgate, lift it up.
⦆
When the lower liftgate is opened, the floor and
lower liftgate make a flat surface for ease of loading
and unloading.
⦆
The lower liftgate can be sit upon.
NOTE:
Maximum load: Static load 200 kg (441
lbs)
LIFTGATE LOCK RELEASE HANDLE
ZC6001390000
A
A
A
A
ON
OFF
Liftgate lock release handle
Liftgate lock release handle
<Vehicles without KOS>
<Vehicles with KOS>
Section A – A
The electric liftgate lock release handle requires low
operating force and has no temperature dependency
improves the opening operation. When the liftgate
lock release handle is operated, the switch is turned
ON or OFF.
If the liftgate cannot be opened from the outside of the
vehicle due to any malfunction such as discharged
battery, it can be opened from the inside of the vehicle
using the following procedure:
ZC6001400000
Cover
1.
Remove the inside release lever cover installed to
the liftgate trim from the inside of the vehicle.
ZC6001410000
Inside release lever
2.
Push down the inside release lever in the direction
of the arrow shown in the figure.
3.
Open the liftgate while pushing it up.
LIFTGATE OPENER CONTROL FUNCTION
ZC6001420000
ON
OFF
UNLOCK
LOCK
ON
OFF
t
t: 0.3 second
0km/h
Liftgate
Vehicle speed
Liftgate lock
release handle
switch
Unlock relay output
42A-16
BODY
DOOR AND LIFTGATE
When the liftgate lock release handle is operated to
open the liftgate (the liftgate lock release handle
switch turns ON) while the vehicle is parked and the
liftgate is unlocked, ETACS-ECU turns the unlock
relay output ON for 0.3 seconds, thus the liftgate can
be opened by the liftgate lock release handle.
POWER WINDOW
M24200000220USA0000010001
ZC6001430000
Power window main switch (Driver's side)
Door window glass
Door window glass
Power window regulator assembly
Power window motor
Power window motor
<Front door>
<Rear door>
Power window
lock switch
Power window switch
Power window regulator assembly
The power window has the following features:
⦆
Safety mechanism <Driver's door only>
⦆
Power window timer function
⦆
Power window lock switch
BODY
42A-17
DOOR AND LIFTGATE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст