Mitsubishi Outlander XL. Manual — part 721

REMOVAL AND INSTALLATION. . . .

42Ab-110

42Ab-3

SPECIFICATION(S)

SERVICE SPECIFICATION

M14203000003USA0000010000

ITEM

STANDARD VALUE

Door inside handle lock knob stroke mm (in) [Target value: mm (in)] 13.7 - 15.0 (0.54 - 0.59) [14.7 (0.58)]
Door inside handle play mm (in)
[Target value: mm (in)]

Driver’s side

10.0 - 23.7 (0.39 - 0.93) [17.0 (0.67)]

Except for driver’s side

5.0 - 18.7 (0.2 - 0.74) [12.0 (0.47)]

Door outside handle play mm (in) [Target value: mm (in)]

0.1 - 5.2 (0.004 - 0.2) [2.5 (0.1)]

Power window operation current A

7 ± 1 [Power supply voltage 14.5 ±
0.5V at 25°C (77°F)]

SEALANT

M14203000005USA0000010000

ITEM

SPECIFIED SEALANT

REMARK

Waterproof film

3 M™AAD Part No. 8633 or
equivalent

Ribbon sealer

COMPONENT IDENTIFICATIONS

M14203000985USA0000010000

<DOOR CHECK>

Applicable location

Identification mark

Front door

Left door

55L

Right door

55R

Rear door

Left door

58L

Right door

58R

<DOOR OPENING OUTER WEATHERSTRIP>

Applicable side

Identification clip color

Left door

White

Right door

Pink

GENERAL INFORMATION

M14203000001USA0000010000

CENTRAL DOOR LOCKING SYSTEM

The central door locking system operates the door
lock actuator to lock or unlock the doors and liftgate
using the door lock switch built into the front power
window (main or sub) switch or key cylinder. The
system has the following operations and features:

｠

All doors and liftgate can be locked using the door
lock switch built into the front power window (main
or sub RH) switch.

｠

Insert the key into the driver's key cylinder and turn
once to the unlock side to unlock the driver's door.

Turn the key once again to the unlock side to unlock
all doors and liftgate.

｠

The key reminder function automatically unlocks all
doors and liftgate when door lock operation is
performed and the front doors are opened while the
key is inserted into the ignition switch.

42Ab-4

DOOR

SPECIFICATION(S)

CENTRAL DOOR LOCKING OPERATION
The function that allows the driver's door to be opened
by pulling the driver's door inside handle even when
the driver's door inside lock knob is in the lock position
is called "override function".

ZC6001350001

t

t

ON

OFF

ON

OFF

ON

OFF

ON

OFF

t: 0.25 second

Lock switch

Lock relay output

Unlock relay output

Unlock switch

When the driver's door is locked by turning the door
lock key cylinder to the lock side (when the lock switch
turns ON after turning OFF the unlock switch in the
driver's door lock actuator), ETACS-ECU turns ON
the lock relay output for 0.25 second, and locks all
doors (including the liftgate). When the driver's door
is unlocked by turning the door lock key cylinder to the
unlock side (when the unlock switch turns ON after
turning OFF the lock switch on the driver's door lock
actuator), ETACS-ECU turns ON the unlock relay
output for 0.25 second, and unlocks all doors
(including the liftgate).

ZC600257

t

ON

(LOCK)

ON

(UNLOCK)

ON

OFF

ON

OFF

Driver's or
passenger's
door lock
switch

Unlock relay
output

Lock relay
output

t: 0.25 Second

t

t

Time lag

t

t

OFF

LOCK

UNLOCK

All doors
lock
actuator

0001

When the door is locked by the driver’s or passenger’s
door lock switch, the ETACS-ECU operates its door
lock relay and passes a current through the door lock
actuators of all the doors (including the liftgate) for
0.25 second to lock all the doors (including the
liftgate).
When the door is unlocked by the driver’s or
passenger's door lock switch, the ETACS-ECU
operates its door unlock relay and passes a current
through the door lock actuators of all the doors
(including the liftgate) for 0.25 second to unlock all the
doors (including the liftgate).
When the door is locked and unlocked by driver’s or
passenger's door lock switch consecutively, the
ETACS-ECU operates its door lock relay and passes
a current through the door lock actuators of all the
doors (including the liftgate) for 0.25 second to lock all
the doors (including the liftgate). Then, the ETACS-
ECU operates its door unlock relay and passes a
current through the door lock actuators of all the doors
(including the liftgate) for 0.25 second to unlock all the
doors (including the liftgate). Due to this, there may be
a time lag between the driver’s or passenger's door
lock switch actuation and the time when all the doors
(including the liftgate) are unlocked.

SELECTOR "P" POSITION-LINKED DOOR
UNLOCKING FUNCTION
When the selector lever is shifted to the "P" (parking)
position with the ignition switch turned ON, all the
doors (including the liftgate) will be unlocked
automatically, improving passengers' convenience for
getting out. Using a customization feature, the
selector "P" position-linked door unlocking function
can be switched (Refer to P.42Ab-94).

ZC6001360001

t

T

ON

OFF

ON

OFF

Inhibiter switch "P"

Unlock relay output

t: 0.25 second
T: 0.3 second

DOOR

42Ab-5

GENERAL INFORMATION

When the selector lever is shifted to the P position with
the ignition switch turned ON, the transaxle range
switch "P" turns ON, ETACS-ECU turns the unlock
relay output ON for 0.25 seconds to unlock all the
doors (including the liftgate).

LIFTGATE OPENER CONTROL FUNCTION

ZC6001420001

ON

OFF

UNLOCK

LOCK

ON

OFF

t

t: 0.3 second

0km/h

Liftgate

Vehicle speed

Liftgate lock
release handle
switch

Unlock relay output

When the liftgate lock release handle is operated to
open the liftgate (the liftgate lock release handle
switch turns ON) while the vehicle is parked and the
liftgate is unlocked, ETACS-ECU turns the unlock
relay output ON for 0.3 seconds, thus the liftgate can
be opened by the liftgate lock release handle.

42Ab-6

DOOR

GENERAL INFORMATION