Mitsubishi Outlander XL. Manual — part 76
90-1
GROUP 90
CIRCUIT DIAGRAMS
CONTENTS
HOW TO READ CIRCUIT
DIAGRAMS . . . . . . . . . . . . . . . . . . . .
ETACS-ECU. . . . . . . . . . . . . . . . . . . .
CENTRALIZED JUNCTION . . . . . . . .
POWER DISTRIBUTION SYSTEM . .
STARTING SYSTEM . . . . . . . . . . . . .
IGNITION SYSTEM . . . . . . . . . . . . . .
CHARGING SYSTEM . . . . . . . . . . . .
MFI SYSTEM . . . . . . . . . . . . . . . . . . .
COOLING SYSTEM . . . . . . . . . . . . . .
SHIFT LOCK MECHANISM . . . . . . . .
INVECS-II 6A/T . . . . . . . . . . . . . . . . .
HEADLIGHT <HALOGEN TYPE> . . .
HEADLIGHT <DISCHARGE TYPE> .
TAILLIGHT, POSITION LIGHT,
REAR SIDE MARKER LIGHT,
LICENSE PLATE LIGHT AND
LIGHTING MONITOR TONE ALARM
HEADLIGHT AUTOMATIC LEVELING
SYSTEM . . . . . . . . . . . . . . . . . . . . . . .
FOG LIGHT . . . . . . . . . . . . . . . . . . . . .
DAYTIME RUNNING LIGHT (DRL) . .
DOME LIGHT, LUGGAGE
COMPARTMENT LIGHT AND IGNITION
KEY HOLE ILLUMINATION LIGHT . .
GLOVE BOX LIGHT . . . . . . . . . . . . . .
FOOT LIGHT. . . . . . . . . . . . . . . . . . . .
TURN-SIGNAL LIGHT AND HAZARD
WARNING LIGHT . . . . . . . . . . . . . . . .
STOPLIGHT . . . . . . . . . . . . . . . . . . . .
BACKUP LIGHT . . . . . . . . . . . . . . . . .
HORN . . . . . . . . . . . . . . . . . . . . . . . . .
METER AND GAUGE . . . . . . . . . . . . .
BRAKE WARNING LIGHT,
FUEL WARNING LIGHT AND
OIL PRESSURE WARNING LIGHT . .
Continued on next page
90-2
POWER WINDOWS . . . . . . . . . . . . . .
CENTRAL DOOR LOCKING
SYSTEM . . . . . . . . . . . . . . . . . . . . . . .
KEYLESS OPERATING SYSTEM
(KOS) . . . . . . . . . . . . . . . . . . . . . . . . .
AIR CONDITIONING SYSTEM . . . . .
WINDSHIELD WIPER AND
WASHER . . . . . . . . . . . . . . . . . . . . . .
REAR WIPER AND WASHER . . . . . .
REAR WINDOW DEFOGGER . . . . . .
HEATED DOOR MIRROR . . . . . . . . .
REMOTE CONTROLLED MIRROR. .
AUDIO SYSTEM <VEHICLES WITHOUT
AUDIO AMPLIFIER> . . . . . . . . . . . . .
AUDIO SYSTEM <VEHICLES WITH
AUDIO AMPLIFIER> . . . . . . . . . . . . .
CLOCK . . . . . . . . . . . . . . . . . . . . . . . .
ACCESSORY SOCKET . . . . . . . . . . .
AC POWER SUPPLY. . . . . . . . . . . . .
MITSUBISHI MULTI-COMMUNICATION
SYSTEM (MMCS). . . . . . . . . . . . . . . .
REAR SEAT ENTERTAINMENT
SYSTEM . . . . . . . . . . . . . . . . . . . . . . .
SPARE CONNECTOR
(FOR REAR DISPLAY) . . . . . . . . . . .
ANTI-LOCK BRAKING SYSTEM
(ABS) . . . . . . . . . . . . . . . . . . . . . . . . .
ANTI-LOCK BRAKING SYSTEM (ABS)
AND ACTIVE SKID CONTROL
SYSTEM (ASC). . . . . . . . . . . . . . . . . .
SUPPLEMENTAL RESTRAINT
SYSTEM (SRS) . . . . . . . . . . . . . . . . . .
IMMOBILIZER SYSTEM . . . . . . . . . . .
ELECTRIC CONTROLLED AWD . . . .
AUTO-CRUISE CONTROL
SYSTEM . . . . . . . . . . . . . . . . . . . . . . .
TIRE PRESSURE MONITORING
SYSTEM (TPMS) . . . . . . . . . . . . . . . .
SUNROOF. . . . . . . . . . . . . . . . . . . . . .
POWER SEAT . . . . . . . . . . . . . . . . . .
HEATED SEAT . . . . . . . . . . . . . . . . . .
IGNITION KEY REMINDER TONE
ALARM
<VEHICLES WITHOUT KOS> . . . . . .
IGNITION KEY REMINDER TONE
ALARM <VEHICLES WITH KOS> . . .
DOOR AJAR WARNING TONE
ALARM . . . . . . . . . . . . . . . . . . . . . . . .
SEAT BELT WARNING TONE
ALARM . . . . . . . . . . . . . . . . . . . . . . . .
THEFT-ALARM SYSTEM . . . . . . . . . .
HANDS FREE SYSTEM . . . . . . . . . . .
SPARE CONNECTOR
(FOR TRAILER LIGHTS) . . . . . . . . . .
CONTROLLER AREA NETWORK
HOW TO READ CIRCUIT DIAGRAMS
CIRCUIT DIAGRAMS
90-3
HOW TO READ CIRCUIT DIAGRAMS
The circuit of each system from the fuse (or fusible
link) to ground is shown. The power supply is shown
at the top and the ground at the bottom to facilitate
understanding of how the current flows. Some varia-
tions are included in one circuit diagram. Accord-
ingly, some diagrams may not be applicable for
individual vehicles. The circuit diagrams show the
state when switches are not operated.
ZC6005470000
Indicates power source.
Indicates that terminal is conne-
cted via a plate in the relay box.
Each circuit diagram consists of
block(s).
Indicates splice point numbers.
These numbers are identical to
those described in "Splice Loca-
tions."
Indicates the circuit name to be
connected. The arrow indicates
the current flow direction.
Indicates the power supply in
the control unit. If no voltage is
displayed, this indicates battery
positive voltage.
An "X" at the end of a connector
number indicates that the conn-
ector is connected to a central-
ized junction that is shown in the
section "Centralized Junction."
Indicates the connector symbol.
Connectors in the circuit diagram
are indicated in numerical order.
Indicates connector number.
The same number is used in the
wiring harness diagram.
Connector and connector numbers
are shown at the lower part of the
page.
Connector numbers not enclosed
by frame indicate the device incor-
porated into wiring harness.
Indicates the circuit name
to be connected. The arrow
indicates the current flow
direction.
Indicates that the diagram contin-
ues at which belongs to the
block in the same circuit.
One-directional arrow indicate
that current flows upwards.
Indicates shield wire.
Indicates the operating conditions
of the engine coolant switch, etc.
Indicates representative vehicle
body ground point. (Same
number as that of ground point in
GROUNDING LOCATION).
Indicates harness junction where
wire diameter or color changes.
In case two or more connectors
are connected to the same
device, markings indicating the
same connector is
connected by a broken line.
Indicates terminal number.
Indicates intersections at
which the lead wires are
not connected.
Indicates intersections at
which the lead wires are
connected.
Indicates input/output
to/from control unit
(current flow direction).
Input Output
Input/
output
Indicates that the diagram comes
from which belongs to the
block in the same circuit.
Indicates a wiring connector which is inside
the equipment and which is not shown in
the wiring harness configuration diagram.
Example C-15-2
Indicates a connector
which is inside the
equipment, numbered
in order starting from 1.
Indicates the connector number shown in
the wiring harness configuration diagram.
Bi-directional arrow indicates
that current flows in both direc-
tions due to control by an ECU.
Indicates that the terminal is a
spare one if the device (sensor
in this case) is not provided.
HOW TO READ CIRCUIT DIAGRAMS
CIRCUIT DIAGRAMS
90-4
CONNECTOR/GROUNDING INDICATIONS
ZC6005480000
3
1
8
7
2
6
4
5
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст