Mitsubishi Outlander XL. Manual — part 1328
⦆
A ignition key cylinder light has been added to the
ignition key cylinder.
⦆
The dimmer interior light control function and
ignition key cylinder illumination light control
function have been adopted for the interior light
(Refer to Function and Control by ETACS-
ECU P.54A-10).
Specifications
Item
Specifications
Front dome light (map and dome light) W × quantity
8 × 2
Rear dome light W
8
Luggage compartment light W
8
Glove box light W
1.4
Center console down light W
LED type
Foot light W
1.4
Ignition key cylinder illumination light W
1.5
FUNCTION AND CONTROL BY ETACS-ECU.
M25400000120USA0000010003
Following functions are controlled by ETACS-ECU.
Function
Function
description
Headlight
Headlight automatic-shutdown function
Flasher timer function
Turn-signal light
Comfort flasher function
Hazard warning light
Daytime running light
Daytime running light function
Fog light <Vehicles without
discharge headlight>
Fog light function
Interior light
Interior light dimmer control function
Interior light automatic-shutoff function
Ignition key cylinder illumination light control function
54A-10
CHASSIS ELECTRICAL
LIGHTING
HEADLIGHT
HEADLIGHT AUTOMATIC-SHUTDOWN FUNCTION THE INITIAL CONDITION: WITH FUNCTION>
(Specification C: When the ignition switch is in OFF position is turned ON, the headlights are not turned
OFF automatically.)
ZC6032310000
OFF
OFF
ON
OFF
ON
OFF
ON
Driver's
door switch
Lighting switch
Headlight output
Tail light output
Ignition switch (IG)
Tail light
Headlight
(Closed) OFF
(Open) ON
1 second
3 minutes
Even when the lighting switch (tail light switch or
headlight switch) is ON, the headlight (including the
tail lights) turns off automatically under any of the
following conditions to prevent the battery discharge
caused by unattended operation.
⦆
If the ignition switch is turned OFF with the lighting
switch ON, the light turns off automatically after 3
minutes. If the driver's door is opened during the 3
minutes, the light turns off after one second. (One
seconds before turning off, the light reminder tone
alarm sounds. However, if the driver's door is
opened with the ignition key inserted, the key
reminder alarm tone alarm operates in the first
priority).
⦆
If the lighting switch is turned to the tail light position
from OFF with the ignition switch OFF, the lights do
not turn off automatically.
NOTE:
The auto-turn off can be made by the
customize function (Refer to P.54A-17).
After this function is activated, when the lighting
switch is turned OFF and then ON or the ignition
switch is turned ON, the headlights illuminate again.
NOTE:
This function can be cancelled through
customization (Refer to Customize
Function P.54A-17).
CHASSIS ELECTRICAL
54A-11
LIGHTING
FLASHER TIMER FUNCTION
TURN-SIGNAL LIGHT (INITIAL SETTING: TURN SIGNAL
LIGHT CAN BE OPERATED WHEN THE IGNITION SWITCH
IS IN THE ON POSITION)
ZC603242
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Ignition
switch (IG )
Turn-signal ligh t
switch R H
Turn-signal ligh t
switch L H
Turn-signal ligh t
output RH
Turn-signal ligh t
output LH
0000
When the turn-signal light switch is ON (LH or RH) with the
ignition switch is ON, the turn-signal light output (flash signal) is
turned ON.
If the light bulb of the front or rear turn-signal light has burned
out, the flashing speed becomes faster to alert the driver that the
light bulb has burned out.
NOTE:
Using a customization function, this function
becomes available even when the ignition switch is in the
ACC position. For more information about the customization
feature, refer to P.54A-17.
COMFORT FLASHER FUNCTION (THE INITIAL CONDITION:
WITH FUNCTION)
ZC603243
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
0000
t: 0.4 seconds or les s
t
t
Ignition
switch (IG )
Turn-signal ligh t
switch R H
Turn-signal ligh t
switch L H
Turn-signal ligh t
output RH
Turn-signal ligh t
output LH
With the ignition switch in the ON position, when the turn signal
switch is turned ON momentarily (0.4 second or less), ETACS-
ECU turns ON the turn signal light output, and flashes the turn
signal light three times.
NOTE:
The comfort flasher function can be cancelled through
customization. (Refer to Customize Function P.54A-17.)
HAZARD WARNING LIGHT
ZC603244
ON
OFF
ON
OFF
ON
OFF
Hazard light
switc h
Turn signal
light output
RH
Turn signal
light output
LH
0000
ETACS-ECU detects the signal that changes the hazard light
switch from OFF to ON, and reverses the flashing state by the
signal (to the flashing state when the hazard light is not flashing,
and to the turned OFF state when flashing).
NOTE:
1.
The push-return switch has been adopted for the hazard light
switch.
2.
Even if the light bulb has burned out, the flashing speed of
the hazard light is not changed.
54A-12
CHASSIS ELECTRICAL
LIGHTING
DAYTIME RUNNING LIGHT
DAYTIME RUNNING LIGHT FUNCTION
ZC6033510000
OFF
HEAD
Ignition switch (IG1)
OFF
ON
Daytime running light output
Lighting switch
Headlight
(Illuminated) ON
(Extinguished) OFF
TAIL
Parking brake switch
OFF
ON
OFF
ON
Passing / Dimmer switch
High-beam
Low-beam
(Normal)
Low-beam
(Dim)
OFF
ETACS-ECU releases the parking brake (the parking
brake switch turns OFF) with the ignition switch ON,
and illuminates the daytime running lights <vehicles
with discharge headlight> or illuminates the low-beam
headlights <vehicles without discharge headlight>
with the lighting switch OFF or in the taillight position.
Also, ETACS-ECU extinguishes the daytime running
light with the lighting switch in the headlight position
<vehicles with discharge headlight>, or illuminates the
low-beam headlights of 100% illuminance <vehicles
without discharge headlight>.
When the ignition switch is turned to the
"LOCK" (OFF) position while the daytime running light
<vehicles with discharge headlight> is illuminated or
the low-beam headlights <vehicles without discharge
headlight> are illuminated with the brightness
reduced, the ETACS-ECU extinguishes the daytime
running light <vehicles with discharge headlight> or
the low-beam headlights.
CHASSIS ELECTRICAL
54A-13
LIGHTING
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст