Mitsubishi Outlander XL. Manual — part 477
DTC No. Diagnosis item
Reference
page
P0736
Reverse gear incorrect ratio
P0741
Torque converter clutch system
Stuck off
P0742
Stuck on
P0743
Lock-up and Low-reverse brake linear solenoid valve system
P0748
Line pressure linear solenoid valve system
P0753
Low clutch linear solenoid valve system
P0758
2-6 brake linear solenoid valve system
P0763
3-5 reverse clutch linear solenoid valve system
P0768
High clutch linear solenoid valve system
P0815
Puddle shift switch (up) system
P0816
Puddle shift switch (down) system
P0826
Shift switch assembly system
P0841
Low clutch pressure switch system
P0846
2-6 brake pressure switch system
P0871
3-5 reverse clutch pressure switch system
P0876
High clutch pressure switch system
P0893
Interlock detection
P0988
Low-reverse brake pressure switch system
P1705
Throttle position sensor information (engine)
P1706
Accelerator pedal position information
P1731
1st engine brake detection
P1753
Low clutch shift solenoid valve system
P1758
Low-reverse brake shift solenoid valve system
P1773
ABS information (ASC)
P1794
Ground return
U0001
CAN bus off
U0100
ECM time-out
U0121
ASC-ECU time out
U0141
ETACS-ECU time out
SYMPTOM CHART
M12301000080USA0000010000
During diagnosis, a DTC code associated with
other system may be set when the ignition switch
is turned on with connector(s) disconnected. On
completion, confirm all systems for DTC code(s).
If DTC code(s) are set, erase them all.
Symptom
Inspection
procedure No.
Reference page
The vehicle does not run at any range (including low power).
1
The vehicle does not run at the "D" or the "R" range.
2
AUTOMATIC TRANSAXLE MECHANICAL
23A-23
AUTOMATIC TRANSAXLE DIAGNOSIS
Symptom
Inspection
procedure No.
Reference page
The acceleration is poor.
3
The vehicle moves at the "N" range.
4
Gears cannot be shifted at all, or a certain gear shift (1st to 2nd,
2nd to 3rd, etc.) is not made.
5
The torque converter is not locked up.
6
The clutch slips when the vehicle starts or during gear shift.
7
The engine brake is not applied.
8
The shift shock is large at a certain gear shift. (1st to 2nd, 2nd to
3rd, etc.)
9
The select shock is large when the transmission range is shifted
from "N" to "D", and "N" to "R."
10
Abnormal sound occurs during idling.
11
Abnormal sound occurs during driving.
12
Abnormal sound occurs during gear shift.
13
Engine stall
14
Oil leaks from the air breather.
15
The starter does not rotate at the "P" or "N" range. (The engine does
not start.)
16
23A-24
AUTOMATIC TRANSAXLE MECHANICAL
AUTOMATIC TRANSAXLE DIAGNOSIS
DIAGNOSTIC TROUBLE CODE PROCEDURES
DTC P0705: Transmission Range Switch System
M12301000394USA0000010001
ETACS-ECU
IG1
RELAY
FUSIBLE
LINK
34
TRANSMISSION
RANGE SWITCH
TRANSMISSION
CONTROL MODULE
ZC6023720000
Transmission range switch system circuit
AUTOMATIC TRANSAXLE MECHANICAL
23A-25
AUTOMATIC TRANSAXLE DIAGNOSIS
ZC6008720001
Connectors: A-12, 13
A-12 A-13
ZC601773
Connector: B-110
B-110 (B)
0001
ZC6035780001
Connector: C-38
Brake pedal
ZC6008750019
Connector: C-129
ZC6008780024
Connectors: C-309, C-313
C-313 (BR)
C-309 (B)
DESCRIPTIONS OF MONITOR METHODS
⦆
The TCM receives no input signal from the
transmission range switch.
⦆
The TCM receives multiple input signals
simultaneously from the transmission range switch.
MONITOR EXECUTION
⦆
Continuous
MONITOR EXECUTION CONDITIONS (OTHER
MONITOR AND SENSOR)
Other Monitor (There is no temporary DTC stored in
memory for the item monitored below)
⦆
Not applicable
Sensor (The sensor below is determined to be
normal)
⦆
Not applicable
23A-26
AUTOMATIC TRANSAXLE MECHANICAL
AUTOMATIC TRANSAXLE DIAGNOSIS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст