Mitsubishi Outlander XL. Manual — part 1270
SELECTOR LEVER ASSEMBLY
M22301000189USA0000010000
ZC6031910000
Shift indicator valve
Shift switch assembly
Shift lock solenoid
Shift lock release button
Shift lock control relay
P position detect switch
The electrical control-type shift lock (the shift lever is
locked in the P position if the brake pedal is not
depressed) mechanism has been adopted for the
selector lever assembly. The functions of each switch
are as follows:
Name
Function
Shift lock release button
Releases forcibly (mechanically) the shift lock.
Shift indicator bulb
Illuminates the shift indicator.
Shift switch assembly
Detects the selector lever activation in the sport
mode.
Shift lock solenoid
Switches the shift lock mechanism ON/OFF.
Shift lock control relay
Switches the shift lock solenoid power supply circuit
ON/OFF.
P position detection switch
Detects the P position.
A/T ERRONEOUS OPERATION PREVENTION MECHANISMS
SHIFT LOCK MECHANISM
M22301000204USA0000010000
STRUCTURE OF SHIFT LOCK SYSTEM
This system is comprised of the following
components.
⦆
Lock lever
⦆
Shift lock solenoid
⦆
Shift lock control relay
⦆
P position detection switch
23-32
AUTOMATIC TRANSAXLE
TRANSAXLE CONTROL
SHIFT LOCK CIRCUIT
ZC6030520000
P position
detect switch
Shift lock
solenoid
Shift lo ck
control rel ay
To stopligh t
switc h
To ignitio n
switc h
Under all of the following conditions, the shift lock solenoid is
energized, allowing the selector lever to move from the P
position to another position.
⦆
Ignition switch: ON
⦆
P position detection switch: ON (the selector lever is in the P
position)
⦆
Stop light switch: ON (brake pedal is depressed)
OPERATIONAL DESCRIPTION
ZC6023610000
Lock lever inhibits
selecting operation
of the lever
sub-assembly.
Lever sub assembly
Shift lock
solenoid
Lock lever
SHIFT LOCK STATUS
With the shift lock status, the shift lock solenoid is not energized,
so when the select operation of the selector lever is attempted,
no select operation is possible because the lock lever blocks the
lever assembly path.
AUTOMATIC TRANSAXLE
23-33
TRANSAXLE CONTROL
SHIFT LOCK RELEASE STATUS
ZC6023620000
A
Lock lever moves to
allow selecting operation
of the lever sub assembly.
Lever sub assembly
Shift lock
solenoid
Lock lever
When the ignition switch is ON, the selector lever is in the P
position, and the brake pedal is depressed, the shift lock
solenoid is energized to move the shift lock solenoid toward the
direction A shown in the figure. Then the lock lever linked to the
shift lock solenoid moves as shown in the figure, and no longer
blocks the lever sub assembly path when the select operation is
performed, enabling the operation.
RELEASE USING THE SHIFT LOCK RELEASE BUTTON
ZC6017720000
If the shift lock no longer operates properly due to a dead battery
or the like, pressing the shift lock release button enables shift
operation from the P position. The shift lock release button can
be operated by removing the cover (arrow-indicated point in the
figure) and pressing it with a flat-tipped screwdriver.Pressing the
shift lock release button moves the lock lever to the position
shown in the figure, enabling shift operation.
23-34
AUTOMATIC TRANSAXLE
TRANSAXLE CONTROL
ZC6023630000
Shift lock release button
operation direction
Lock lever
KEY LOCK MECHANISM
M22301000205USA0000010000
When the ignition key is in any position the LOCK
(OFF) position, the selector lever cannot be shifted
from the P position to another position. Also, when the
selector lever is not in the P position, the ignition key
cannot be turned to the LOCK (OFF) position and
pulled out.
AUTOMATIC TRANSAXLE
23-35
TRANSAXLE CONTROL
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст