Mitsubishi Montero (2004+). Manual — part 1046
ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-27
STEP 4. Check ABS sensor circuit at the M-ASTC-ECU
connectors E-119 and E-120.
(1) Disconnect connectors E-119, E-120 and measure at the
harness side.
(2) Measure the resistance between the M-ASTC-ECU
connector E-119 terminals 30 and 31, 27 and 28 or
M-ASTC-ECU connector E-120 terminals 46 and 47, 60
and 61.
Standard Value: 1.0
− 1.5 kΩ
Q: Is the resistance between M-ASTC-ECU connector E-119
terminals 30 and 31, 27 and 28 or M-ASTC-ECU
connector E-120 terminals 46 and 47, 60 and 61 within
the standard value?
When resistances between all terminals are within the
standard value. : Go to Step 9.
When resistance between M-ASTC-ECU connector
E-119 terminals 30 and 31 is not within the standard
value. : Go to Step 5.
When resistance between M-ASTC-ECU connector
E-119 terminals 27 and 28 is not within the standard
value. : Go to Step 6.
When resistance between M-ASTC-ECU connector
E-120 terminals 46 and 47 is not within the standard
value. : Go to Step 7.
When resistance between M-ASTC-ECU connector
E-120 terminals 60 and 61 is not within the standard
value. : Go to Step 8.
AC204391
CONNECTORS: E-119, E-120
E-119
AB
E-120
E-119 HARNESS CONNECTOR:
COMPONENT SIDE
E-120 HARNESS CONNECTOR:
COMPONENT SIDE
ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-28
STEP 5. Check the harness wires between M-ASTC-ECU
connector E-119 terminal 30 and ABS sensor <front: LH>
connector A-24 terminal 1 or M-ASTC-ECU connector
E-119 terminal 31 and ABS sensor <front: LH> connector
A-24 terminal 2.
NOTE: After inspecting M-ASTC-ECU connector E-119, inter-
mediate connector A-03 and ABS sensor <front: LH> connector
A-24, inspect the wire. If M-ASTC-ECU connector E-119, inter-
mediate connector A-03 and ABS sensor <front: LH> connector
A-24 are damaged, repair or replace them. Refer to GROUP
00E, Harness Connector Inspection
.Then go to Step
11.
AC203901
AC204627AC
CONNECTOR: E-119
E-119
HARNESS CONNECTOR:
COMPONENT SIDE
E-119
ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-29
Q: Is the harness wire between M-ASTC-ECU connector
E-119 terminal 30 and ABS sensor <front: LH>
connector A-24 terminal 1 or M-ASTC-ECU connector
E-119 terminal 31 and ABS sensor <front: LH>
connector A-24 terminal 2 damaged?
YES : Repair it and go to Step 11.
NO : Go to Step 11.
AC204388
AC204665
CONNECTOR: A-24
AB
A-24(B)
1
2
A-24 HARNESS CONNECTOR:
COMPONENT SIDE
AC204389
CONNECTOR: A-03
A-03(B)
AC
1
6 7
2
8
3
10
5
9
4
A-03
ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-30
STEP 6. Check the harness wires between M-ASTC-ECU
connector E-119 terminal 27 and ABS sensor <front: RH>
connector A-37 terminal 1 or M-ASTC-ECU connector
E-119 terminal 28 and ABS sensor <front: RH> connector
A-37 terminal 2.
NOTE: After inspecting M-ASTC-ECU connector E-119, inter-
mediate connector A-03 and ABS sensor <front: RH> connec-
tor A-37, inspect the wire. If M-ASTC-ECU connector E-119,
intermediate connector A-03 and ABS sensor <front: RH> con-
nector A-37 are damaged, repair or replace them. Refer to
GROUP 00E, Harness Connector Inspection
.Then go
to Step 11.
AC203901
AC204627AC
CONNECTOR: E-119
E-119
HARNESS CONNECTOR:
COMPONENT SIDE
E-119
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст