Mitsubishi Montero (2004+). Manual — part 428
TRANSMISSION
TSB Revision
AUTOMATIC TRANSMISSION OVERHAUL
23B-39
(13) Remove the parts installed in steps 24 (1) to (12).
CAUTION
Make sure thrust bearing number 7 is mounted in the cor-
rect direction.
25.Apply Vaseline or petroleum jelly on the thrust bearing
number 7, and then install on the rear side of the
low/reverse annulus gear.
CAUTION
Make sure that thrust bearing number 7 attached to the
rear side of the low/reverse annulus gear does not fall off.
26.Install the low/reverse annulus gear.
2.1 or more
− less than 2.3 (0.083 or more − less than 0.091) 2.4 (0.094)
B
MD759428
2.3 or more
− less than 2.5 (0.091 or more − less than 0.098) 2.6 (0.102)
A
MD759429
2.5 or more
− less than 2.7 (0.098 or more − less than 0.106) 2.8 (0.110)
0
MD759430
2.7 or more
− less than 2.9 (0.106 or more − less than 0.114) 3.0 (0.118)
1
MD759431
MOVING AMOUNT mm (in)
PRESSURE PLATE
THICKNESS
mm (in)
ID SYMBOL ID SYMBOL
AKX00087
THRUST
BEARING NO.7
AB
AKX00088
THRUST
BEARING NO.7
AB
AKX00046
TRANSMISSION
TSB Revision
AUTOMATIC TRANSMISSION OVERHAUL
23B-40
27.Install the reverse sun gear.
28.Install the wave spring to the low/reverse brake piston.
29.Install the pressure plate, brake disc and brake plate
selected in step 24 (12).
30.Install the snap ring.
CAUTION
Make sure the reaction plate in the proper direction.
31.Install the reaction plate.
AKX00089
AKX00090
AKX00091
AKX00092
AKX00093
TRANSMISSION
TSB Revision
AUTOMATIC TRANSMISSION OVERHAUL
23B-41
32.Install the snap ring selected in step 24 (5).
CAUTION
Make sure the brake plate (reaction plate side) is installed
in the proper direction.
33.Install the brake disc, brake plate and pressure plate
selected in step 24 (9).
CAUTION
Install the return spring end coil side so that it faces the
back of the transmission. (Only for one side end coil type)
34.Install the return spring and second brake.
35.Install the snap ring.
AKX00094
AKX00095
PRESSURE PLATE
BRAKE PLATE
REACTION
PLATE
AB
AKX00096
END COIL
AB
AKX00097
SECOND BRAKE
RETURN SPRING
AB
AKX00098
TRANSMISSION
TSB Revision
AUTOMATIC TRANSMISSION OVERHAUL
23B-42
CAUTION
Make sure thrust bearing number 4 is installed in the
proper direction.
36.Apply Vaseline or petroleum jelly on the thrust bearing
number 4, and then install on the reverse sun gear.
CAUTION
Make sure thrust bearing number 3 is mounted in the cor-
rect direction.
37.Apply Vaseline or petroleum jelly on the thrust bearing
number 3, and then install on the overdrive clutch hub.
38.Install the overdrive clutch hub.
AKX00099
THRUST
BEARING
NO.4
AB
AKX00100
THRUST
BEARING NO.4
AB
AKX00101
THRUST
BEARING
NO.3
AB
AKX00102
THRUST
BEARING
NO.3
OVERDRIVE
CLUTCH
HUB
AB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст