Mitsubishi Montero (2004+). Manual — part 563
VIDEO ENTERTAINMENT SYSTEM (VES)
TSB Revision
CHASSIS ELECTRICAL
54A-221
INSPECTION PROCEDURE 4: Only the image (including sound), which are sent from auxiliary
equipment, is not displayed.
.
CIRCUIT OPERATION
The video controller unit receives image (or sound)
data from an auxiliary equipment, which is connected
to the VTR adapter.
.
TECHNICAL DESCRIPTION (COMMENT)
The circuit between the video controller unit and the
VTR adapter may be defective.
.
TROUBLESHOOTING HINTS
• Malfunction of the VTR adapter
• Malfunction of the video controller unit
• Damaged wiring harness and connectors
.
DIAGNOSIS
Required Special Tool:
• MB991223: Harness Set
VIDEO CONTROLLER UNIT
VTR ADAPTER
VTR Adapter Circuit
AC309223
AC
CONNECTOR: F-34
AC309248
AC
CONNECTOR: G-29
G-29 (B)
VIDEO ENTERTAINMENT SYSTEM (VES)
TSB Revision
CHASSIS ELECTRICAL
54A-222
STEP 1. Check the video controller unit connector F-34
and VTR adapter connector G-29 for loose, corroded or
damaged terminals, or terminals pushed back in the
connector.
Q: Is the video controller unit connector F-34 and VTR
adapter connector G-29 in good condition?
YES : Go to Step 2.
NO : Repair or replace the component(s). Refer to GROUP
00E, Harness Connector Inspection
image (and sound) received from the auxiliary
equipment is normal.
STEP 2. Check the wiring harness between video
controller unit connector F-34 (terminal 18, 13 and 14) and
VTR adapter connector G-29 (terminal 1, 6 and 4).
Q: Is the wiring harness between video controller unit
connector F-34 (terminal 18, 13 and 14) and VTR adapter
connector G-29 (terminal 1, 6 and 4) in good condition?
YES : Go to Step 3.
NO : Repair the wiring harness. The remote controller
works normally.
AC309248
AB
CONNECTOR: G-29
G-29 (B)
HARNESS SIDE
AC309223
AC
CONNECTOR: F-34
HARNESS SIDE
AC309248
AB
CONNECTOR: G-29
G-29 (B)
HARNESS SIDE
AC309223
AC
CONNECTOR: F-34
HARNESS SIDE
VIDEO ENTERTAINMENT SYSTEM (VES)
TSB Revision
CHASSIS ELECTRICAL
54A-223
STEP 3. Substitute the VTR adapter, and retest the system.
Confirm that the image (and sound) received from the auxiliary
equipment is normal after the VTR adapter is substituted.
Q: Is the check result normal?
YES : The procedure is complete.
NO : Replace the video controller unit.
INSPECTION PROCEDURE 5: Only sound does not come out when a DVD is played.
VIDEO
CONTROLLER
UNIT
RADIO AND
CD PLAYER
DIN CABLE
DVD PLAYER
REAR DISPLAY
DVD Sound Circuit
AC305231CI
CONNECTORS: C-01, C-03, C-29
C-01
C-03
C-29
AC305233
C-05 (B)
CK
CONNECTOR: C-05
VIDEO ENTERTAINMENT SYSTEM (VES)
TSB Revision
CHASSIS ELECTRICAL
54A-224
.
CIRCUIT OPERATION
The DVD sound is sent from the DVD player through
the video controller unit, the rear display and the
radio and CD player, and then to the speakers.
.
TECHNICAL DESCRIPTION (COMMENT)
The DIN cable(s) of the radio and CD player, the
DVD player and the rear display sound system circuit
may be defective.
.
TROUBLESHOOTING HINTS
• Malfunction of the DIN cable
• Malfunction of the DVD player
• Malfunction of the rear display
• Malfunction of the video controller unit
• Damaged wiring harness and connectors
.
DIAGNOSIS
Required Special Tool:
• MB991223: Harness Set
STEP 1. Check the DIN cable between radio and CD player
and video controller unit.
Q: Is the DIN cable between radio and CD player and video
controller unit in good condition?
YES : Go to Step 2.
NO : Replace the DIN cable.
AC305415
CONNECTORS: C-211, C-215
JUNCTION BLOCK
(FRONT VIEW)
C-215
C-211
BA
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст