Mitsubishi Montero (2004+). Manual — part 953
DATA LIST REFERENCE TABLE
TSB Revision
AUTOMATIC TRANSMISSION
23A-387
SELECT SW 67
Select switch
Ignition switch: ON Transmission range:
D
OFF
Selector lever
operation: Select
sport mode
ON
Selector lever
operation: Upshift
and hold the selector
lever
ON
Selector lever
operation: Downshift
and hold the selector
lever
ON
SHIFT POS
63
Shift position
Transmission
range: Sport mode
Driving at constant
speed of 10 km/h
(6.2 mph) in 1st gear
1st
Transmission
range: Sport mode
Driving at constant
speed of 30 km/h (19
mph) in 2nd gear
2nd
Transmission
range: Sport mode
Driving at constant
speed of 50 km/h (31
mph) in 3rd gear
3rd
Transmission
range: Sport mode
Driving at constant
speed of 50 km/h (31
mph) in 4th gear
4th
Transmission
range: Sport mode
Driving at constant
speed of 70 km/h (44
mph) in 5th gear
5th
Transmission
range: R
Driving at constant
speed of 5 km/h (3.1
mph) in reverse gear
REV
Transmission
range: P or N
PN
SHIFT SW
DOWN
69
Shift switch (Down)
Ignition switch: ON Transmission range:
D
OFF
Selector lever
operation: Select
sport mode
OFF
Selector lever
operation: Upshift
and hold the selector
lever
OFF
Selector lever
operation: Downshift
and hold the selector
lever
ON
MUT-III
SCAN TOOL
DISPLAY
ITEM
NO.
INSPECTION ITEM INSPECTION REQUIREMENT
NORMAL
CONDITION
DATA LIST REFERENCE TABLE
TSB Revision
AUTOMATIC TRANSMISSION
23A-388
SHIFT SW
UP
68
Shift switch (Up)
Ignition switch: ON Transmission range:
D
OFF
Selector lever
operation: Select
sport mode
OFF
Selector lever
operation: Upshift
and hold the selector
lever
ON
Selector lever
operation: Downshift
and hold the selector
lever
OFF
STOPLIGHT
SW
26
Stoplight switch
Ignition switch: ON Brake pedal:
Depressed
ON
Brake pedal:
Released
OFF
TCC
SLIPPAGE
52
Torque converter
clutch amount of
slippage
• Warmed up
• Transmission
range: Sport
mode
• Driving at speed
of 80 km/h (50
mph) in 4th
gear
Driving at constant
speed of 80 km/h (50
mph)
−10 to 10 r/min
Release accelerator
pedal (at less than
50 km/h (31 mph))
The value should
fluctuate when the
accelerator is
released
TCC SOL
DUTY
36
Torque converter
clutch solenoid valve
duty %
• Warmed up
• Transmission
range: Sport
mode
• Driving at speed
of 80 km/h (50
mph) in 4th
gear
Driving at constant
speed of 80 km/h (50
mph)
70
− 99.6%
Release accelerator
pedal (at less than
50 km/h (31 mph))
70
− 99.6% → 0%
Decreases
gradually as the
vehicle speed
decreases
MUT-III
SCAN TOOL
DISPLAY
ITEM
NO.
INSPECTION ITEM INSPECTION REQUIREMENT
NORMAL
CONDITION
DATA LIST REFERENCE TABLE
TSB Revision
AUTOMATIC TRANSMISSION
23A-389
TF LOW
DETECT
75
4LLc detection
switch
• Ignition switch:
ON
• Transmission
range: N
Transfer position: 4L
Lc
ON
Transfer position:
Other than above
OFF
TP SENSOR 11
Throttle position
sensor
• Ignition switch:
ON
• Engine:
Stopped
• Transmission
range: P
Accelerator pedal:
Fully closed
200
− 800 mV
Accelerator pedal:
Depressed
Gradually rises
from the above
value
Accelerator pedal:
Fully open
3,800
− 4,900 mV
TFT
SENSOR
15
Transmission fluid
temperature sensor
Warmed up
Drive for 15 minutes
or more so that the
transmission fluid
temperature
becomes 70
− 80°C
(158
− 176°F)
Gradually rises to
70
− 80°C (158 −
176
°F)
U/D SOL
DUTY
32
Underdrive solenoid
valve duty %
Transmission
range: Sport mode
Driving at constant
speed of 10 km/h
(6.2 mph) in 1st gear
0%
Transmission
range: Sport mode
Driving at constant
speed of 30 km/h (19
mph) in 2nd gear
0%
Transmission
range: Sport mode
Driving at constant
speed of 50 km/h (31
mph) in 3rd gear
0%
Transmission
range: Sport mode
Driving at constant
speed of 50 km/h (31
mph) in 4th gear
0%
Transmission
range: Sport mode
Driving at constant
speed of 70 km/h (43
mph) in 5th gear
100%
VSS
29
Vehicle speed
sensor
Transmission
range: Sport mode
Idling with 1st gear
(Vehicle stopped)
0 km/h (0 mph)
Driving at constant
speed of 50 km/h (31
mph)
50 km/h (31 mph)
MUT-III
SCAN TOOL
DISPLAY
ITEM
NO.
INSPECTION ITEM INSPECTION REQUIREMENT
NORMAL
CONDITION
ACTUATOR TEST REFERENCE TABLE
TSB Revision
AUTOMATIC TRANSMISSION
23A-390
ACTUATOR TEST REFERENCE TABLE
M1231101000110
MUT-III
SCAN TOOL
DISPLAY
ITEM
NO.
INSPECTION ITEM
TEST CONTENT
INSPECTION
REQUIREMENT
NORMAL
CONDITION
1st SIFT LMP 07
1st indicator light
Illuminate each
indicator light for
three to the signal
from the scan tool
MB991958
(MUT-III sub
assembly)
• Ignition switch:
ON
• Transmission
range: P
• Engine:
stopped
• Throttle
opening
voltage: Less
than one volt
Shift indicator light
illuminates.
2nd SIFT
LMP
08
2nd indicator light
2ND SOL
03
Second solenoid valve
Drive the solenoid
valve specified by
scan tool
MB991958
(MUT-III sub
assembly) at 50%
duty for five
seconds. No other
solenoid valve
should be
energized.
The solenoid
should click when
activated
3rd SIFT LMP 09
3rd indicator light
Illuminate each
indicator light for
three to the signal
from the scan tool
MB991958
(MUT-III sub
assembly)
Shift indicator light
illuminates.
4th SIFT LMP 10
4th indicator light
5th SIFT LMP 11
5th indicator light
A/T RELAY
12
A/T control relay
Actuator test in
scope mode, data
list No.54. Control
relay is OFF for
three seconds.
Data list No.54
• (1 )During test:
0 V
• (2) Normal:
Battery positive
voltage [12 V]
L/R SOL
01
Low-reverse solenoid
valve
Drive the solenoid
valve specified by
scan tool
MB991958
(MUT-III sub
assembly) at 50%
duty for five
seconds. No other
solenoid valve
should be
energized.
The solenoid
should click when
activated
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст