Mitsubishi Montero (2004+). Manual — part 6
VEHICLE IDENTIFICATION
TSB Revision
GENERAL <BODY AND CHASSIS>
00-17
<VEHICLES FOR CANADA>
VEHICLE INFORMATION CODE PLATE
M1001005400451
The vehicle information code plate is riveted onto the cowl top
outer panel in the engine compartment.
The plate shows model code, engine model, transmission
model and body color code.
For monotone color vehicles, the body color code shall be indi-
cated. For two-tone vehicles, each color code only shall be indi-
cated in series.
CHASSIS NUMBER
.
STAMPING LOCATION
The chassis number is stamped on the center of the dash
panel.
.
CHASSIS NUMBER CODE CHART
VIN (EXCEPT SEQUENCE
NUMBER)
BRAND
ENGINE
DISPLACEMENT
MODEL CODE
JA4MW31S_4J
MITSUBISHI
MONTERO
3.8L
V77WLYHVL3M
JA4MW51S_4J
V77WLYXVL3M
NO. ITEM
CONTENT
1
MODEL
V77WLYXV
L2M
V77W; Vehicle model
LYXVL2M; Model series
2
ENGINE
6G75
Engine model
3
EXT
A69D
Exterior code
4
TRANSAXL
E
V5A51
4300
V5A51; Transmission model
4300; Rear differential
reduction
5
COLOR,
INT OPT
A69 21T
Z08
A69; Body color code
21T; Interior code
Z08; Equipment code
ACX01697
CHASSIS
NUMBER
CODE
CONTENT
V77W3J000001 V77W;
Vehicle line
V77W; MONTERO
3J000001; Refer to 10th thru 17th digits of
VIN plate
AC203793
AB
VEHICLE IDENTIFICATION
TSB Revision
GENERAL <BODY AND CHASSIS>
00-18
VEHICLE SAFETY CERTIFICATION LABEL
The vehicle safety certification label is attached to the face of
the left door sill.
This label indicates the month and year of manufacture, Gross
Vehicle Weight Rating (GVWR), front and rear Gross Axle
Weight Rating (GAWR), and Vehicle Identification Number
(VIN).
ENGINE MODEL STAMPING
The engine model is stamped on the cylinder block.
These engine model numbers are as shown as follows.
The engine serial number is stamped near the engine model
number.
AC203794
AB
ENGINE MODEL
ENGINE DISPLACEMENT
6G75
3.8L
AC203954 AB
VEHICLE IDENTIFICATION
TSB Revision
GENERAL <BODY AND CHASSIS>
00-19
THEFT PROTECTION
In order to protect against theft, a Vehicle Identification Number
(VIN) is attached as a plate or label to the following major parts
of the engine and transmission, as well as main outer panels:
Engine cylinder block, Transmission housing. Fender, Doors,
Liftgate, Quarter panel, Hood, Bumpers
In addition, a theft-protection label is attached to replacement
parts for the body outer panel main components, and the same
data are stamped into replacement parts for the engine and the
transmission.
CAUTION
Cautions regarding panel repairs:
1. When repainting original parts, do so after first masking
the theft-protection label. After painting, be sure to peel
off the masking tape.
2. The theft-protection label for replacement parts is cov-
ered by masking tape, so such parts can be painted as
is. The masking tape should be removed after painting
is finished.
3. The theft-protection label should not be removed from
original parts or replacement parts.
ACX00878 AB
THEFT PROTECTION PLATE (VIN PLATE)
FOR ENGINE
FOR TRANSMISSION
THEFT PROTECTION LABEL
FOR MAIN OUTER PANELS
[FOR ORIGINAL PARTS]
[FOR REPLACEMENT PARTS]
VEHICLE IDENTIFICATION
TSB Revision
GENERAL <BODY AND CHASSIS>
00-20
LOCATIONS
TARGET AREA (A: FOR ORIGINAL EQUIPMENT PARTS, B: FOR REPLACEMENT PARTS)
ACX01547
ENGINE
ENGINE UNDERSIDE
AB
A
B
ACX01191AC
B
A
AUTOMATIC TRANSMISSION
ACX01192
B
A
AB
FENDER
The illustration indicates left outer side.
Right side is symmetrically opposite.
ACX01193
A
B
AB
QUARTER PANEL
The illustration indicates left outer side.
Right side is symmetrically opposite.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст