Mitsubishi Montero (2004+). Manual — part 724
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-153
NOTE: Also check junction block connector D-221 and inter-
mediate connector D-28 for loose, corroded or damaged termi-
nals, or terminals pushed back in the connectors. If junction
block connector D-221 or intermediate connector D-28 is dam-
aged, repair or replace the damaged component(s) as
described in GROUP 00E, Harness Connector Inspection
.
Q: Is the wiring harness between power window relay
connector D-219 (terminal 5) and fusible link (4) in good
condition?
YES : No action is necessary and testing is complete.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary. Verify that
the power windows function should now work
normally.
STEP 7. Check power window main switch connector H-05
for loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is power window main switch connector H-05 in good
condition?
YES : Go to Step 8.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
. Verify that the power windows function
should now work normally.
AC203859AB
CONNECTOR: D-28
D-28
D-28
AC203774
CONNECTOR: H-05
AE
DRIVER'S DOOR
9
2
12
1413
1110
5
7 6
4 3
8
1
HARNESS
SIDE
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-154
STEP 8. Check the ground circuit to the power window
main switch. Test at power window main switch connector
H-05.
(1) Disconnect power window main switch connector H-05 and
measure the resistance available at the harness side.
(2) Measure the resistance value between terminal 3 and
ground.
• The resistance should equal 2 ohms or less.
Q: Is the measured resistance 2 ohms or less?
YES : Go to Step 10.
NO : Go to Step 9.
STEP 9. Check the wiring harness between power window
main switch connector H-05 (terminal 3) and ground.
AC203774
CONNECTOR: H-05
AE
DRIVER'S DOOR
9
2
12
1413
1110
5
7 6
4 3
8
1
HARNESS
SIDE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
ACX01606 AB
CONNECTOR H-05
(HARNESS SIDE)
AC203774
CONNECTOR: H-05
AE
DRIVER'S DOOR
9
2
12
1413
1110
5
7 6
4 3
8
1
HARNESS
SIDE
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-155
NOTE: Also check intermediate connector D-25 for loose, cor-
roded or damaged terminals, or terminals pushed back in the
connector. If intermediate connector D-25 is damaged, repair or
replace the damaged component(s) as described in GROUP
00E, Harness Connector Inspection
Q: Is the wiring harness between power window relay
connector H-05 (terminal 3) and ground in good
condition?
YES : No action is necessary and testing is complete.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary. Verify that
the power windows function should now work
normally.
STEP 10. Check the battery power supply circuit to the
power window main switch. Test at power window main
switch connector H-05.
(1) Disconnect power window main switch connector H-05 and
measure the voltage available at the harness side of the
connector.
(2) Turn the ignition switch to "ON" position.
(3) Measure the voltage between terminal 5 and ground.
• The voltage should be approximately 12 volts (battery
positive voltage).
Q: Is the measured voltage approximately 12 volts (battery
positive voltage)?
YES : Go to Step 12.
NO : Go to Step 11.
AC203859 AC
CONNECTOR: D-25
D-25
D-25
AC203774
CONNECTOR: H-05
AE
DRIVER'S DOOR
9
2
12
1413
1110
5
7 6
4 3
8
1
HARNESS
SIDE
AC203852
1
2
3
4
5
6
7
8
9
10
11
12
13
14
AB
CONNECTOR H-05
(HARNESS SIDE)
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-156
STEP 11. Check the wiring harness between power window
relay connector D-219 (terminal 4) and power window main
switch connector H-05 (terminal 5).
AC203850AB
CONNECTOR: D-219
JUNCTION BLOCK
(FRONT VIEW)
D-219
1
2
3
4
5
JUNCTION
BLOCK SIDE
D-219
AC203774
CONNECTOR: H-05
AE
DRIVER'S DOOR
9
2
12
1413
1110
5
7 6
4 3
8
1
HARNESS
SIDE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст