Mitsubishi Outlander GS45X. Manual — part 1046
SEAT ASSEMBLY
TSB Revision
INTERIOR
52A-33
>>B<< SEAT SLIDE CABLE INSTALLATION
Fit the second recess of the clamp in view A and view B to the
bracket. When installing the cable, make sure that the cable is
not bitten by the moving area.
.
AC613404
A
B
Seat slide cable
AB
AC613410AB
Install the
cable to
the frame.
Fit the second
recess of the
clamp.
View A
AC609926AB
Fit the second
recess of the clamp.
View B
SEAT ASSEMBLY
TSB Revision
INTERIOR
52A-34
>>C<< SLIDE LOCK RELEASE CABLE FOR
AUTOMATIC TUMBLE MECHANISM
INSTALLATION
1. When installing the cable in view A, protrude the screws to
the position marked during the removal. Then, tumble the
seatback and check that the slide locks on the right and left
side are fully released. When installing the cable, install the
cable with the green marking to the left rail.
2. Fit the second recess of the clamp (yellow) shown in view B
to the bracket. Pass the cable between the brackets when
installing it. Make sure that the cable is not bitten by the
moving area.
.
AC613405
A
AB
B
Slide lock
release cable
for automatic
tumble
mechanism
AC610887AB
Green marking
Marking
View A
Marking
AC609944
Slide lock release cable
for automatic tumble
mechanism
Fit the second recess
of the clamp (yellow)
to the bracket.
Pass the cable
between the brackets.
AB
View B
SEAT ASSEMBLY
TSB Revision
INTERIOR
52A-35
>>D<< SEAT RAIL REAR END LATCH RELEASE
CABLE INSTALLATION
Fit the second recess of the clamp in view A to the bracket.
When installing the cable, make sure that the cable is not bitten
by the moving area. When installing the cable in view B, install
the cable with the red marking to the left rail.
.
AC613406
Seat rail
rear end latch
release cable
A
AB
B
AC609943
Seat rail rear end latch
release cable
Fit the
second
recess of
the clamp
(yellow green)
to the bracket.
Pass the cable
between the brackets.
AB
View A
AC610888
Red marking
AB
View B
SEAT ASSEMBLY
TSB Revision
INTERIOR
52A-36
>>E<< TUMBLE LOCK RELEASE CABLE
INSTALLATION
Install the cable as shown in view A. Fit the second recess of
the clamp in view A and view B to the bracket. When installing
the cable, make sure that the cable is not bitten by the moving
area.
.
AC613399
Tumble lock
release cable
AB
A
AC609948AB
B
C
Pass the cable
between the
bracket and the
frame.
View A
Fix with a clip.
AC609947
Fit the second
recess of the
clamp.
AB
View B
AC609945
Fit the second
recess of
the clamp
AB
View C
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст