Mitsubishi Outlander GS45X. Manual — part 1618
![](/vehicles/winoney/pleueamivene/yomawofeerel/betayeantrr.png)
DIAGNOSIS
TSB Revision
CVT
23A-29
Seal ring location
DIAGNOSTIC TROUBLE CODE CHART
M1231207900550
CAUTION
During diagnosis, a diagnostic trouble code
associated with other system may be set when
the ignition switch is turned on with connector(s)
disconnected. On completion, confirm all sys-
tems for diagnostic trouble code(s). If diagnostic
trouble code(s) are set, erase them all.
AC509098AB
A
B
Diagnostic
trouble code No.
Diagnostic item
Reference
page
P0703
Malfunction of stoplight switch
P0705
Malfunction of transmission range switch
P0711
Malfunction of the transmission fluid temperature sensor
P0712
Malfunction of the transmission fluid temperature sensor (short)
P0713
Malfunction of the transmission fluid temperature sensor (open)
P0715
Malfunction of primary pulley speed sensor
P0720
Malfunction of secondary pulley speed sensor
P0725
Malfunction of engine speed
P0740
Malfunction of lockup solenoid valve
P0741
Abnormality in lockup function
P0745
Malfunction of line pressure solenoid valve
P0746
Abnormality in hydraulic control system function
P0776
Abnormality in secondary pressure solenoid valve function
P0778
Malfunction of secondary pressure solenoid valve
P0815
Malfunction of paddle shift up switch
P0816
Malfunction of paddle shift down switch
P0826
Malfunction of shift switch assembly
![](/vehicles/winoney/pleueamivene/yomawofeerel/xauminithi.png)
DIAGNOSIS
TSB Revision
CVT
23A-30
TROUBLE SYMPTOM CHART
M1231208000323
CAUTION
During diagnosis, a diagnostic trouble code
associated with other system may be set when
the ignition switch is turned on with connector(s)
disconnected. On completion, confirm all sys-
tems for diagnostic trouble code(s). If diagnostic
trouble code(s) are set, erase them all.
P0840
Malfunction of secondary pressure sensor
P0841
Abnormality in line pressure sensor function
P0868
Secondary pressure drop
P0882
Malfunction of system power supply (Low)
P0883
Malfunction of system power supply (High)
P1637
Malfunction of memory backup
P1706
Malfunction of throttle signal
P1710
Malfunction of vehicle speed signal
P1723
Abnormality in speed sensor system function
P1740
Malfunction of lockup/select switching solenoid valve
P1745
Monitoring of percentage change in pulley ratio
P1773
Malfunction of ABS
P1777
Malfunction of stepper motor
P1778
Abnormality in stepper motor function
P1902
Malfunction of engine system
U0001
Malfunction of CAN communication circuit
U0100
CAN time-out error (Engine)
U0121
CAN time-out error (ABS)
U0141
CAN time-out error (ETACS)
Diagnostic
trouble code No.
Diagnostic item
Reference
page
Trouble symptom
Inspection
procedure
number
Reference
page
TCM cannot communicate with scan tool MB991958.
1
Vehicle creeps in the N range.
2
Shock is experienced during N to D and/or N to R shifting operation.
3
Poor acceleration or incomplete shifting operation.
4
Cannot be changed in sport mode.
5
Cannot be changed with paddle shift.
6
The fluid temperature warning lamp illuminates too frequently
7
![](/vehicles/winoney/pleueamivene/yomawofeerel/chacontanung.png)
DIAGNOSIS
TSB Revision
CVT
23A-31
DIAGNOSTIC TROUBLE CODE PROCEDURES
DTC P0703: Malfunction of Stoplight Switch
FUSIBLE
LINK
34
STOPLIGHT
SWITCH
STOPLIGHT
RELAY
Stoplight switch system circuit
ETACS-ECU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Grey R : Red P : Pink V : Violet PU : Purple SI : Silver
AC901223
AC702815 BC
Connectors: C-124, C-129
C-129
C-124
AC900773
AD
Brake pedal
Connector: C-133
![](/vehicles/winoney/pleueamivene/yomawofeerel/what.png)
DIAGNOSIS
TSB Revision
CVT
23A-32
.
DIAGNOSTIC FUNCTION
TCM detects malfunction using the stoplight switch
signal sent from the ETACS-ECU.
.
DESCRIPTIONS OF MONITOR METHODS
• Drive the vehicle at 30 km/h (19 mph) or more for
10 seconds, and then turn the ignition switch to
the "LOCK" (OFF) position. In this sequential
operation, no variation has been found in the
stoplight switch input signal in two consecutive
times.
.
MONITOR EXECUTION
• Continuous
.
MONITOR EXECUTION CONDITIONS
(OTHER MONITOR AND SENSOR)
Other Monitor (There is no temporary DTC stored
in memory for the item monitored below)
• Not applicable
Sensor (The sensor below is determined to be
normal)
• Not applicable
.
AC702828
C-312
C-304
AV
Connectors: C-304, C-309, C-312
C-309 (B)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст