Mitsubishi Outlander GS45X. Manual — part 1304
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-161
STEP 26. Using scan tool MB991958, diagnose the CAN
bus line. (checking the occupant classification-ECU for
internal failure)
CAUTION
Strictly observe the specified wiring harness repair proce-
dure. For details refer to
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Disconnect occupant classification-ECU connector D-34-2.
(2) Connect scan tool MB991958 to the data link connector.
(3) Turn the ignition switch to the "ON" position.
(4) Diagnose CAN bus lines, and check if the scan tool
MB991958 screen is as shown in the figure.
OK: The display of the scan tool MB991958 is as
shown in the figure.
Q: Does scan tool MB991958 screen correspond to the
illustration?
YES : Check intermediate connectors C-31 and D-34, and
repair if necessary. If the intermediate connector is in
good condition, repair the wiring harness between
joint connector (CAN1) C-103 and occupant
classification-ECU connector D-34-2.
NO : Check occupant classification-ECU connector D-34-2,
and repair if necessary. If the occupant
classification-ECU connector is in good condition,
replace the occupant classification-ECU.
ZC501967
AC404789
AC702802
MB991824
MB991827
MB991910
Data link
connector
AB
ACA02847AD
: Red section on screen
M.U.T.
JC
JC
SAS
AWC
ABS/ASC
AT/CVT
ENGINE
ETACS
JC
F.A.S.T.
/WCM
SRS
OCM
A/C
AUDIO
MMCS
Sat Radio
METER
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-162
STEP 27. Using scan tool MB991958, diagnose the CAN
bus line. (checking the A/C-ECU for internal failure)
CAUTION
Strictly observe the specified wiring harness repair proce-
dure. For details refer to
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Disconnect A/C-ECU connector C-109.
(2) Connect scan tool MB991958 to the data link connector.
(3) Turn the ignition switch to the "ON" position.
(4) Diagnose CAN bus lines, and check if the scan tool
MB991958 screen is as shown in the figure.
OK: The display of the scan tool MB991958 is as
shown in the figure.
Q: Does scan tool MB991958 screen correspond to the
illustration?
YES : Repair the wiring harness between joint connector
(CAN1) C-103 and A/C-ECU connector C-109.
NO : Check A/C-ECU connector C-109, and repair if
necessary. If the A/C-ECU connector is in good
condition, replace the A/C-ECU.
ZC501967
AC404789
AC702802
MB991824
MB991827
MB991910
Data link
connector
AB
ACA02847AD
: Red section on screen
M.U.T.
JC
JC
SAS
AWC
ABS/ASC
AT/CVT
ENGINE
ETACS
JC
F.A.S.T.
/WCM
SRS
OCM
A/C
AUDIO
MMCS
Sat Radio
METER
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-163
STEP 28. Using scan tool MB991958, diagnose the CAN
bus line. (checking the radio and CD player or radio and
CD changer for internal failure)
CAUTION
Strictly observe the specified wiring harness repair proce-
dure. For details refer to
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Disconnect radio and CD player or radio and CD changer
connector C-16.
(2) Connect scan tool MB991958 to the data link connector.
(3) Turn the ignition switch to the "ON" position.
(4) Diagnose CAN bus lines, and check if the scan tool
MB991958 screen is as shown in the figure.
OK: The display of the scan tool MB991958 is as
shown in the figure.
Q: Does scan tool MB991958 screen correspond to the
illustration?
YES : Repair the wiring harness between joint connector
(CAN1) C-103 and radio and CD player or radio and
CD changer connector C-16.
NO : Check radio and CD player or radio and CD changer
connector C-16, and repair if necessary. If the radio
and CD player or radio and CD changer connector is
in good condition, replace the radio and CD player or
radio and CD changer.
ZC501967
AC404789
AC702802
MB991824
MB991827
MB991910
Data link
connector
AB
ACA02847AD
: Red section on screen
M.U.T.
JC
JC
SAS
AWC
ABS/ASC
AT/CVT
ENGINE
ETACS
JC
F.A.S.T.
/WCM
SRS
OCM
A/C
AUDIO
MMCS
Sat Radio
METER
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-164
STEP 29. Using scan tool MB991958, diagnose the CAN
bus line. (checking the CAN box unit for internal failure)
CAUTION
Strictly observe the specified wiring harness repair proce-
dure. For details refer to
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Disconnect CAN box unit connector C-13.
(2) Connect scan tool MB991958 to the data link connector.
(3) Turn the ignition switch to the "ON" position.
(4) Diagnose CAN bus lines, and check if the scan tool
MB991958 screen is as shown in the figure.
OK: The display of the scan tool MB991958 is as
shown in the figure.
Q: Does scan tool MB991958 screen correspond to the
illustration?
YES : Check intermediate connector C-17, and repair if
necessary. If the intermediate connector is in good
condition, repair the wiring harness between joint
connector (CAN1) C-103 and CAN box unit connector
C-13.
NO : Check CAN box unit connector C-13, and repair if
necessary. If the CAN box unit connector is in good
condition, replace the CAN box unit.
ZC501967
AC404789
AC702802
MB991824
MB991827
MB991910
Data link
connector
AB
ACA02847AD
: Red section on screen
M.U.T.
JC
JC
SAS
AWC
ABS/ASC
AT/CVT
ENGINE
ETACS
JC
F.A.S.T.
/WCM
SRS
OCM
A/C
AUDIO
MMCS
Sat Radio
METER
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст