Mitsubishi Outlander GS45X. Manual — part 1591
CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-13
2. Read a DTC by observing the flash display pattern of the
"CRUISE" indicator light in the combination meter.
DIAGNOSTIC RESULT DISPLAY METHOD WHEN USING THE "CRUISE" INDICATOR
LIGHT
NOTE: Other on-board diagnostic items are also out-
put as voltage waveforms corresponding to diagnos-
tic trouble code numbers.
HOW TO ERASE DIAGNOSTIC TROUBLE CODES
Disconnect the negative (
−) battery cable.
HOW TO CONNECT THE SCAN TOOL (M.U.T.-III).
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicle Communication Interface (V.C.I.)
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A
ACA03397
AB
"CRUISE" indicator light
When the diagnostic trouble code number 23 is output
When no diagnostic trouble code is
output
AC703915
12V
0V
Pause
time: 3 s
Ten digit
Digit
division:
2 s
First digit
0.5 s
1 s
AB
1 s
AC703916AB
12V
0V
0.25 s
Continuous ON and OFF signals
at intervals of 0.25 s
CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-14
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
1. Start up the personal computer.
2. Connect special tool MB991827 to special tool MB991824
and the personal computer.
3. Connect special tool MB991910 to special tool MB991824.
4. Connect special tool MB991910 to the data link connector.
5. Turn the power switch of special tool MB991824 to the "ON"
position.
NOTE: When special tool MB991824 is energized, special
tool MB991824 indicator light will be illuminated in green
color.
6. Start the M.U.T.-III system on the personal computer.
NOTE: Disconnecting scan tool MB991958 is the reverse of
the connecting sequence, making sure that the ignition
switch is at the "LOCK" (OFF) position.
HOW TO READ DATA LIST
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: V.C.I.
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Select "System Select" from the start-up screen.
4. Select "From 2006 MY" of "Model Year." When the "Vehicle
Information" is displayed, check the contents.
5. Select "AUTO CRUISE" from "System List", and press the
"OK" button.
NOTE: When the "Loading Option Setup" list is displayed,
check the applicable item.
6. Select the "MITSUBISHI."
7. Select the "Data List."
NOTE: When the "Data List Reference Table" button is
selected, the service data reference table is displayed, and
the normal values can be checked.
8. Choose an appropriate item.
ZC501967
AC404789
AC703911AB
MB991824
MB991827
MB991910
Data link
connector
CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-15
HOW TO DIAGNOSE THE CAN BUS LINE
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: V.C.I.
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Select the "CAN Bus Diagnosis" from the start-up screen.
4. When the vehicle information is displayed, confirm that it
matches the vehicle whose CAN bus lines will be
diagnosed.
• If they match, go to step 8.
• If not, go to step 5.
5. Select the "view vehicle information" button.
6. Enter the vehicle information and select the "OK" button.
7. When the vehicle information is displayed, confirm again
that it matches the vehicle which whose CAN bus lines will
be diagnosed.
• If they match, go to step 8.
• If not, go to step 5.
8. Press the "OK" button.
9. When the optional equipment screen is displayed, choose
the one which the vehicle is fitted with, and then select the
"OK" button.
DIAGNOSTIC TROUBLE CODE CHART
M1172002200950
Check according to the inspection chart that is
appropriate for the diagnostic trouble code.
Diagnostic trouble code
number
Inspection item
Reference page
15
Cruise control switch system
22
Stoplight switch system
23
ECM and its related components
CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-16
DIAGNOSTIC TROUBLE CODE PROCEDURES
DTC 15: Cruise Control Switch System.
AC709996 AB
Cruise Control Switch Circuit
AC703918AB
B-11 (GR)
Connector: B-11
ACA03170
Connector: C-34
AB
C-34
(BR)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст