Mitsubishi Outlander GS45X. Manual — part 1198
GENERAL DATA AND SPECIFICATIONS
TSB Revision
GENERAL
00-35
Item
CW6WX
LUYZL2M
LUYZL3M
Vehicle dimension
mm (in)
Overall length
1 4,665 (183.7)
4,665 (183.7)
Overall width
2 1,800 (70.9)
1,800 (70.9)
Overall height
(unladen)
Without roof rail
3 1,680 (66.1)
−
With roof rail
1,720 (67.7)
1,720 (67.7)
Wheelbase
4 2,670 (105.1)
2,670 (105.1)
Tread-front
5 1,540 (60.6)
1,540 (60.6)
Tread-rear
6 1,540 (60.6)
1,540 (60.6)
Overhang-front
7 990 (39.0)
990 (39.0)
Overhang-rear
8 1,005 (39.6)
1,005 (39.6)
Ground clearance
9 215 (8.5)
215 (8.5)
Vehicle weight kg
(lb)
Curb weight
1,715 (3,780)
1,715 (3,780)
Gross vehicle weight rating
2,350 (5,181)
2,350 (5,181)
Gross axle weight rating-front
1,090 (2,403)
1,090 (2,403)
Gross axle weight rating-rear
1,270 (2,800)
1,270 (2,800)
Seating capacity
7
7
Engine
Model No.
6B31
6B31
Type
SOHC MIVEC
SOHC MIVEC
Piston displacement cm
3
(cu in)
2,998 (182.9)
2,998 (182.9)
Transaxle
Model No.
W6AJA
W6AJA
Type
AWD, INVECS-II 6A/T
with sport mode
AWD, INVECS-II 6A/T
with sport mode
Fuel system
Fuel supply system
MFI
MFI
GENERAL DATA AND SPECIFICATIONS
TSB Revision
GENERAL
00-36
VEHICLES FOR MEXICO
.
2.4L ENGINE
.
AC901145
5
2
9
7
4
8
1
3
6
AB
Item
CW5WX
TSHL2CS
Vehicle dimension
mm (in)
Overall length
1 4,665 (183.7)
Overall width
2 1,800 (70.9)
Overall height
(unladen)
Without roof rail
3 1,680 (66.1)
With roof rail
1,720 (67.7)
Wheelbase
4 2,670 (105.1)
Tread-front
5 1,540 (60.6)
Tread-rear
6 1,540 (60.6)
Overhang-front
7 990 (39.0)
Overhang-rear
8 1,005 (39.6)
Ground clearance
9 215 (8.5)
Vehicle weight kg
(lb)
Curb weight
1,535 (3,384)
Gross vehicle weight rating
2,070 (4,564)
Gross axle weight rating-front
1,090 (2,403)
Gross axle weight rating-rear
1,050 (2,315)
Seating capacity
5
Engine
Model No.
4B12
Type
DOHC MIVEC
Piston displacement cm
3
(cu in)
2,359 (143.9)
Transaxle
Model No.
F1CJA
Type
FWD, INVECS-III CVT with sport mode
Fuel system
Fuel supply system
MFI
GENERAL DATA AND SPECIFICATIONS
TSB Revision
GENERAL
00-37
3.0L ENGINE
Item
CW6WX
LXYL2CS
Vehicle dimension
mm (in)
Overall length
1 4,665 (183.7)
Overall width
2 1,800 (70.9)
Overall height
(unladen)
Without roof rail
3 −
With roof rail
1,720 (67.7)
Wheelbase
4 2,670 (105.1)
Tread-front
5 1,540 (60.6)
Tread-rear
6 1,540 (60.6)
Overhang-front
7 990 (39.0)
Overhang-rear
8 1,005 (39.6)
Ground clearance
9 215 (8.5)
Vehicle weight kg
(lb)
Curb weight
1,645 (3,626)
Gross vehicle weight rating
2,300 (5,071)
Gross axle weight rating-front
1,090 (2,403)
Gross axle weight rating-rear
1,270 (2,800)
Seating capacity
7
Engine
Model No.
6B31
Type
SOHC MIVEC
Piston displacement cm
3
(cu in)
2,998 (182.9)
Transaxle
Model No.
F6AJA
Type
FWD, INVECS-II 6A/T with sport mode
Fuel system
Fuel supply system
MFI
PRECAUTIONS BEFORE SERVICE
TSB Revision
GENERAL
00-38
PRECAUTIONS BEFORE SERVICE
CAUTIONS FOR WORKING IN ENGINE
COMPARTMENT
M1001016800044
WARNING
Just after the ignition switch is turned to "LOCK"
(OFF) position, the adjustments must always be made
with the cooling fan stopped. After the ignition switch
is turned to "LOCK" (OFF) position, the cooling fun
might be driven for a few minutes by the after run fan
control. If the adjustments are made with the cooling
fun driven, injury or damage may occur.
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
M1001011601781
1. Items to review when servicing SRS:
(1) Be sure to read GROUP 52B, Supplemental Restraint
System (SRS). For safe operation, please follow the
directions and heed all warnings.
(2) Wait at least 60 seconds after disconnecting the battery
cable before doing any further work. The SRS system is
designed to retain enough voltage to deploy the air bag
even after the battery has been disconnected. Serious
injury may result from unintended air bag deployment if
work is done on the SRS system immediately after the
battery cable is disconnected.
(3) Warning labels must be heeded when servicing or
handling SRS components. Warning labels can be found
in the following locations (Refer to GROUP 52B
Warning/Caution Labels).
(4) Always use the designated special tools and test
equipment.
(5) Store components removed from the SRS in a clean and
dry place. The air bag module should be stored on a flat
surface and placed so that the pad surface is facing
upward.
(6) Never attempt to disassemble or repair the SRS
components (SRS-ECU, air bag module and clock
spring). If there is a defect, replace the defective part.
(7) Whenever you finish servicing the SRS, check the SRS
warning light operation to make sure that the system
functions properly.
(8) Be sure to deploy the air bag before disposing of the air
bag module or disposing of a vehicle equipped with an air
bag (Refer to GROUP 52B
, Air Bag Module
Disposal Procedures).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст