Mitsubishi Outlander GS45X. Manual — part 466
STEERING WHEEL SENSOR
TSB Revision
ACTIVE STABILITY CONTROL SYSTEM (ASC)
35C-291
STEERING WHEEL SENSOR
REMOVAL AND INSTALLATION
M1355005100674
CAUTION
• Always align the center of the clock spring before installing the steering wheel sensor. Otherwise,
the sensor can be damaged.
• If the center of the clock spring is not correctly aligned, the steering wheel may not be turned fully
or the cable inside the clock spring may be broken, causing the SRS air bag to be inoperative or
operated incorrectly.
• Before removing the steering wheel/air bag module assembly, refer to GROUP 52B − Service Pre-
cautions
and Air Bag Module Clock Spring
• When the steering wheel sensor is replaced or reinstalled, always carry out calibration to make
ASC-ECU learn the neutral point. (Refer to
.)
REMOVAL SERVICE POINT
.
<<A>> STEERING WHEEL SENSOR REMOVAL
CAUTION
After removing the steering wheel sensor, do not rotate the
sensor rotating part by 360
° or more.
Pre-removal operation
• Air bag module assembly and steering wheel assembly
removal (Refer to GROUP 37
− Steering Wheel
Post-installation operation
• Airbag module assembly and steering wheel assembly
installation (Refer to GROUP 37
− Steering Wheel
• Perform steering wheel calibration. (Refer to
).
ACA02951
2
AC
1
Removal steps
1. Clock spring/column switch
assembly (Refer to GROUP
54A
− Column Switch
).
<<
A
>>
2. Steering wheel sensor
NOTES
35-1
GROUP 35
SERVICE BRAKES
CONTENTS
BASIC BRAKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ANTI-LOCK BRAKING SYSTEM (ABS). . . . . . . . . . . . . . . . . . .
ACTIVE STABILITY CONTROL SYSTEM (ASC). . . . . . . . . . . .
NOTES
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст